Partilhar via


Stopwatch.ElapsedMilliseconds Propriedade

Definição

Obtém o tempo total decorrido, medido pela instância atual, em milissegundos.

public:
 property long ElapsedMilliseconds { long get(); };
public long ElapsedMilliseconds { get; }
member this.ElapsedMilliseconds : int64
Public ReadOnly Property ElapsedMilliseconds As Long

Valor da propriedade

Um inteiro longo somente leitura que representa o número total de milissegundos medidos pela instância atual.

Exemplos

O exemplo a seguir usa a Stopwatch classe para medir o desempenho de quatro implementações diferentes para analisar um inteiro de uma cadeia de caracteres. Este exemplo de código faz parte de um exemplo maior fornecido para a Stopwatch classe .

void TimeOperations()
{
   Int64 nanosecPerTick = (1000L * 1000L * 1000L) / Stopwatch::Frequency;
   const long numIterations = 10000;
   
   // Define the operation title names.
   array<String^>^operationNames = {"Operation: Int32.Parse(\"0\")","Operation: Int32.TryParse(\"0\")","Operation: Int32.Parse(\"a\")","Operation: Int32.TryParse(\"a\")"};
   
   // Time four different implementations for parsing 
   // an integer from a string. 
   for ( int operation = 0; operation <= 3; operation++ )
   {
      // Define variables for operation statistics.
      Int64 numTicks = 0;
      Int64 numRollovers = 0;
      Int64 maxTicks = 0;
      Int64 minTicks = Int64::MaxValue;
      int indexFastest = -1;
      int indexSlowest = -1;
      Int64 milliSec = 0;
      Stopwatch ^ time10kOperations = Stopwatch::StartNew();
      
      // Run the current operation 10001 times.
      // The first execution time will be tossed
      // out, since it can skew the average time.
      for ( int i = 0; i <= numIterations; i++ )
      {
         Int64 ticksThisTime = 0;
         int inputNum;
         Stopwatch ^ timePerParse;
         switch ( operation )
         {
            case 0:
               
               // Parse a valid integer using
               // a try-catch statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               try
               {
                  inputNum = Int32::Parse( "0" );
               }
               catch ( FormatException^ ) 
               {
                  inputNum = 0;
               }

               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 1:
               
               // Parse a valid integer using
               // the TryParse statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               if (  !Int32::TryParse( "0", inputNum ) )
               {
                  inputNum = 0;
               }
               
               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 2:
               
               // Parse an invalid value using
               // a try-catch statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               try
               {
                  inputNum = Int32::Parse( "a" );
               }
               catch ( FormatException^ ) 
               {
                  inputNum = 0;
               }

               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 3:
               
               // Parse an invalid value using
               // the TryParse statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               if (  !Int32::TryParse( "a", inputNum ) )
               {
                  inputNum = 0;
               }
               
               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            default:
               break;
         }

         // Skip over the time for the first operation,
         // just in case it caused a one-time
         // performance hit.
         if ( i == 0 )
         {
            time10kOperations->Reset();
            time10kOperations->Start();
         }
         else
         {
            // Update operation statistics
            // for iterations 1-10001.
            if ( maxTicks < ticksThisTime )
            {
               indexSlowest = i;
               maxTicks = ticksThisTime;
            }
            if ( minTicks > ticksThisTime )
            {
               indexFastest = i;
               minTicks = ticksThisTime;
            }
            numTicks += ticksThisTime;
            if ( numTicks < ticksThisTime )
            {
               // Keep track of rollovers.
               numRollovers++;
            }
         }
      }
      
      // Display the statistics for 10000 iterations.
      time10kOperations->Stop();
      milliSec = time10kOperations->ElapsedMilliseconds;
      Console::WriteLine();
      Console::WriteLine( "{0} Summary:", operationNames[ operation ] );
      Console::WriteLine( "  Slowest time:  #{0}/{1} = {2} ticks", indexSlowest, numIterations, maxTicks );
      Console::WriteLine( "  Fastest time:  #{0}/{1} = {2} ticks", indexFastest, numIterations, minTicks );
      Console::WriteLine( "  Average time:  {0} ticks = {1} nanoseconds", numTicks / numIterations, (numTicks * nanosecPerTick) / numIterations );
      Console::WriteLine( "  Total time looping through {0} operations: {1} milliseconds", numIterations, milliSec );

   }
}
private static void TimeOperations()
{
    long nanosecPerTick = (1000L*1000L*1000L) / Stopwatch.Frequency;
    const long numIterations = 10000;

    // Define the operation title names.
    String [] operationNames = {"Operation: Int32.Parse(\"0\")",
                                   "Operation: Int32.TryParse(\"0\")",
                                   "Operation: Int32.Parse(\"a\")",
                                   "Operation: Int32.TryParse(\"a\")"};

    // Time four different implementations for parsing
    // an integer from a string.

    for (int operation = 0; operation <= 3; operation++)
    {
        // Define variables for operation statistics.
        long numTicks = 0;
        long numRollovers = 0;
        long maxTicks = 0;
        long minTicks = Int64.MaxValue;
        int indexFastest = -1;
        int indexSlowest = -1;
        long milliSec = 0;

        Stopwatch time10kOperations = Stopwatch.StartNew();

        // Run the current operation 10001 times.
        // The first execution time will be tossed
        // out, since it can skew the average time.

        for (int i=0; i<=numIterations; i++)
        {
            long ticksThisTime = 0;
            int inputNum;
            Stopwatch timePerParse;

            switch (operation)
            {
                case 0:
                    // Parse a valid integer using
                    // a try-catch statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    try
                    {
                        inputNum = Int32.Parse("0");
                    }
                    catch (FormatException)
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.

                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 1:
                    // Parse a valid integer using
                    // the TryParse statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    if (!Int32.TryParse("0", out inputNum))
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 2:
                    // Parse an invalid value using
                    // a try-catch statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    try
                    {
                        inputNum = Int32.Parse("a");
                    }
                    catch (FormatException)
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 3:
                    // Parse an invalid value using
                    // the TryParse statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    if (!Int32.TryParse("a", out inputNum))
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;

                default:
                    break;
            }

            // Skip over the time for the first operation,
            // just in case it caused a one-time
            // performance hit.
            if (i == 0)
            {
                time10kOperations.Reset();
                time10kOperations.Start();
            }
            else
            {

                // Update operation statistics
                // for iterations 1-10000.
                if (maxTicks < ticksThisTime)
                {
                    indexSlowest = i;
                    maxTicks = ticksThisTime;
                }
                if (minTicks > ticksThisTime)
                {
                    indexFastest = i;
                    minTicks = ticksThisTime;
                }
                numTicks += ticksThisTime;
                if (numTicks < ticksThisTime)
                {
                    // Keep track of rollovers.
                    numRollovers ++;
                }
            }
        }

        // Display the statistics for 10000 iterations.

        time10kOperations.Stop();
        milliSec = time10kOperations.ElapsedMilliseconds;

        Console.WriteLine();
        Console.WriteLine("{0} Summary:", operationNames[operation]);
        Console.WriteLine("  Slowest time:  #{0}/{1} = {2} ticks",
            indexSlowest, numIterations, maxTicks);
        Console.WriteLine("  Fastest time:  #{0}/{1} = {2} ticks",
            indexFastest, numIterations, minTicks);
        Console.WriteLine("  Average time:  {0} ticks = {1} nanoseconds",
            numTicks / numIterations,
            (numTicks * nanosecPerTick) / numIterations );
        Console.WriteLine("  Total time looping through {0} operations: {1} milliseconds",
            numIterations, milliSec);
    }
}
   Private Shared Sub TimeOperations()

      Dim nanosecPerTick As Long = 1000000000 / Stopwatch.Frequency
      Const numIterations As Long = 10000
      
      ' Define the operation title names.
      Dim operationNames As String() =  _
        {"Operation: Int32.Parse(""0"")", _
         "Operation: Int32.TryParse(""0"")", _
         "Operation: Int32.Parse(""a"")", _
         "Operation: Int32.TryParse(""a"")"}
      
      ' Time four different implementations for parsing 
      ' an integer from a string. 

      Dim operation As Integer
      For operation = 0 To 3
         ' Define variables for operation statistics.
         Dim numTicks As Long = 0
         Dim numRollovers As Long = 0
         Dim maxTicks As Long = 0
         Dim minTicks As Long = Int64.MaxValue
         Dim indexFastest As Integer = - 1
         Dim indexSlowest As Integer = - 1
         Dim milliSec As Long = 0
         
         Dim time10kOperations As Stopwatch = Stopwatch.StartNew()
         
         ' Run the current operation 10001 times.
         ' The first execution time will be tossed
         ' out, since it can skew the average time.
         Dim i As Integer
         For i = 0 To numIterations
            Dim ticksThisTime As Long = 0
            Dim inputNum As Integer
            Dim timePerParse As Stopwatch
            
            Select Case operation
               Case 0
                  ' Parse a valid integer using
                  ' a try-catch statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  Try
                     inputNum = Int32.Parse("0")
                  Catch e As FormatException
                     inputNum = 0
                  End Try
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 1
                  ' Parse a valid integer using
                  ' the TryParse statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  If Not Int32.TryParse("0", inputNum) Then
                     inputNum = 0
                  End If
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 2
                  ' Parse an invalid value using
                  ' a try-catch statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  Try
                     inputNum = Int32.Parse("a")
                  Catch e As FormatException
                     inputNum = 0
                  End Try
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 3
                  ' Parse an invalid value using
                  ' the TryParse statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  If Not Int32.TryParse("a", inputNum) Then
                     inputNum = 0
                  End If
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               
               Case Else
            End Select
            
            ' Skip over the time for the first operation,
            ' just in case it caused a one-time
            ' performance hit.
            If i = 0 Then
               time10kOperations.Reset()
               time10kOperations.Start()
            Else
               
               ' Update operation statistics
               ' for iterations 1-10001.
               If maxTicks < ticksThisTime Then
                  indexSlowest = i
                  maxTicks = ticksThisTime
               End If
               If minTicks > ticksThisTime Then
                  indexFastest = i
                  minTicks = ticksThisTime
               End If
               numTicks += ticksThisTime
               If numTicks < ticksThisTime Then
                  ' Keep track of rollovers.
                  numRollovers += 1
               End If
            End If
         Next i
         
         ' Display the statistics for 10000 iterations.
         time10kOperations.Stop()
         milliSec = time10kOperations.ElapsedMilliseconds
         
         Console.WriteLine()
         Console.WriteLine("{0} Summary:", operationNames(operation))
         Console.WriteLine("  Slowest time:  #{0}/{1} = {2} ticks", _
            indexSlowest, numIterations, maxTicks)
         Console.WriteLine("  Fastest time:  #{0}/{1} = {2} ticks", _
            indexFastest, numIterations, minTicks)
         Console.WriteLine("  Average time:  {0} ticks = {1} nanoseconds", _
            numTicks / numIterations, numTicks * nanosecPerTick / numIterations)
         Console.WriteLine("  Total time looping through {0} operations: {1} milliseconds", _
            numIterations, milliSec)
      Next operation

   End Sub
End Class

Comentários

Essa propriedade representa o tempo decorrido arredondado para baixo até o valor de milissegundo inteiro mais próximo. Para medidas de precisão mais altas, use as Elapsed propriedades ou ElapsedTicks .

Você pode consultar as propriedades Elapsed, ElapsedMillisecondse ElapsedTicks enquanto a Stopwatch instância estiver em execução ou interrompida. As propriedades de tempo decorrido aumentam constantemente enquanto o Stopwatch está em execução; elas permanecem constantes quando a instância é interrompida.

Por padrão, o valor de tempo decorrido de uma Stopwatch instância é igual ao total de todos os intervalos de tempo medidos. Cada chamada para começa a Start contar no tempo decorrido cumulativo; cada chamada para Stop termina a medida de intervalo atual e congela o valor de tempo decorrido cumulativo. Use o Reset método para limpar o tempo decorrido cumulativo em uma instância existente Stopwatch .

Aplica-se a

Confira também