Upraviť

Zdieľať cez


Semaphore.Release Method

Definition

Exits the semaphore.

Overloads

Release()

Exits the semaphore and returns the previous count.

Release(Int32)

Exits the semaphore a specified number of times and returns the previous count.

Release()

Source:
Semaphore.cs
Source:
Semaphore.cs
Source:
Semaphore.cs

Exits the semaphore and returns the previous count.

public:
 int Release();
public int Release ();
member this.Release : unit -> int
Public Function Release () As Integer

Returns

The count on the semaphore before the Release method was called.

Exceptions

The semaphore count is already at the maximum value.

A Win32 error occurred with a named semaphore.

The current semaphore represents a named system semaphore, but the user does not have Modify.

-or-

The current semaphore represents a named system semaphore, but it was not opened with Modify.

Examples

The following code example creates a semaphore with a maximum count of three and an initial count of zero. The example starts five threads, which block waiting for the semaphore. The main thread uses the Release(Int32) method overload to increase the semaphore count to its maximum, allowing three threads to enter the semaphore. Each thread uses the Thread.Sleep method to wait for one second, to simulate work, and then calls the Release() method overload to release the semaphore.

Each time the semaphore is released, the previous semaphore count is displayed. Console messages track semaphore use. The simulated work interval is increased slightly for each thread, to make the output easier to read.

#using <System.dll>
using namespace System;
using namespace System::Threading;

public ref class Example
{
private:
   // A semaphore that simulates a limited resource pool.
   //
   static Semaphore^ _pool;

   // A padding interval to make the output more orderly.
   static int _padding;

public:
   static void Main()
   {
      // Create a semaphore that can satisfy up to three
      // concurrent requests. Use an initial count of zero,
      // so that the entire semaphore count is initially
      // owned by the main program thread.
      //
      _pool = gcnew Semaphore( 0,3 );
      
      // Create and start five numbered threads.
      //
      for ( int i = 1; i <= 5; i++ )
      {
         Thread^ t = gcnew Thread(
            gcnew ParameterizedThreadStart( Worker ) );
         
         // Start the thread, passing the number.
         //
         t->Start( i );
      }
      
      // Wait for half a second, to allow all the
      // threads to start and to block on the semaphore.
      //
      Thread::Sleep( 500 );
      
      // The main thread starts out holding the entire
      // semaphore count. Calling Release(3) brings the
      // semaphore count back to its maximum value, and
      // allows the waiting threads to enter the semaphore,
      // up to three at a time.
      //
      Console::WriteLine( L"Main thread calls Release(3)." );
      _pool->Release( 3 );

      Console::WriteLine( L"Main thread exits." );
   }

private:
   static void Worker( Object^ num )
   {
      // Each worker thread begins by requesting the
      // semaphore.
      Console::WriteLine( L"Thread {0} begins and waits for the semaphore.", num );
      _pool->WaitOne();
      
      // A padding interval to make the output more orderly.
      int padding = Interlocked::Add( _padding, 100 );

      Console::WriteLine( L"Thread {0} enters the semaphore.", num );
      
      // The thread's "work" consists of sleeping for
      // about a second. Each thread "works" a little
      // longer, just to make the output more orderly.
      //
      Thread::Sleep( 1000 + padding );

      Console::WriteLine( L"Thread {0} releases the semaphore.", num );
      Console::WriteLine( L"Thread {0} previous semaphore count: {1}",
         num, _pool->Release() );
   }
};
using System;
using System.Threading;

public class Example
{
    // A semaphore that simulates a limited resource pool.
    //
    private static Semaphore _pool;

    // A padding interval to make the output more orderly.
    private static int _padding;

    public static void Main()
    {
        // Create a semaphore that can satisfy up to three
        // concurrent requests. Use an initial count of zero,
        // so that the entire semaphore count is initially
        // owned by the main program thread.
        //
        _pool = new Semaphore(initialCount: 0, maximumCount: 3);

        // Create and start five numbered threads. 
        //
        for(int i = 1; i <= 5; i++)
        {
            Thread t = new Thread(new ParameterizedThreadStart(Worker));

            // Start the thread, passing the number.
            //
            t.Start(i);
        }

        // Wait for half a second, to allow all the
        // threads to start and to block on the semaphore.
        //
        Thread.Sleep(500);

        // The main thread starts out holding the entire
        // semaphore count. Calling Release(3) brings the 
        // semaphore count back to its maximum value, and
        // allows the waiting threads to enter the semaphore,
        // up to three at a time.
        //
        Console.WriteLine("Main thread calls Release(3).");
        _pool.Release(releaseCount: 3);

        Console.WriteLine("Main thread exits.");
    }

    private static void Worker(object num)
    {
        // Each worker thread begins by requesting the
        // semaphore.
        Console.WriteLine("Thread {0} begins " +
            "and waits for the semaphore.", num);
        _pool.WaitOne();

        // A padding interval to make the output more orderly.
        int padding = Interlocked.Add(ref _padding, 100);

        Console.WriteLine("Thread {0} enters the semaphore.", num);
        
        // The thread's "work" consists of sleeping for 
        // about a second. Each thread "works" a little 
        // longer, just to make the output more orderly.
        //
        Thread.Sleep(1000 + padding);

        Console.WriteLine("Thread {0} releases the semaphore.", num);
        Console.WriteLine("Thread {0} previous semaphore count: {1}",
            num, _pool.Release());
    }
}
Imports System.Threading

Public Class Example

    ' A semaphore that simulates a limited resource pool.
    '
    Private Shared _pool As Semaphore

    ' A padding interval to make the output more orderly.
    Private Shared _padding As Integer

    <MTAThread> _
    Public Shared Sub Main()
        ' Create a semaphore that can satisfy up to three
        ' concurrent requests. Use an initial count of zero,
        ' so that the entire semaphore count is initially
        ' owned by the main program thread.
        '
        _pool = New Semaphore(0, 3)

        ' Create and start five numbered threads. 
        '
        For i As Integer = 1 To 5
            Dim t As New Thread(New ParameterizedThreadStart(AddressOf Worker))
            'Dim t As New Thread(AddressOf Worker)

            ' Start the thread, passing the number.
            '
            t.Start(i)
        Next i

        ' Wait for half a second, to allow all the
        ' threads to start and to block on the semaphore.
        '
        Thread.Sleep(500)

        ' The main thread starts out holding the entire
        ' semaphore count. Calling Release(3) brings the 
        ' semaphore count back to its maximum value, and
        ' allows the waiting threads to enter the semaphore,
        ' up to three at a time.
        '
        Console.WriteLine("Main thread calls Release(3).")
        _pool.Release(3)

        Console.WriteLine("Main thread exits.")
    End Sub

    Private Shared Sub Worker(ByVal num As Object)
        ' Each worker thread begins by requesting the
        ' semaphore.
        Console.WriteLine("Thread {0} begins " _
            & "and waits for the semaphore.", num)
        _pool.WaitOne()

        ' A padding interval to make the output more orderly.
        Dim padding As Integer = Interlocked.Add(_padding, 100)

        Console.WriteLine("Thread {0} enters the semaphore.", num)
        
        ' The thread's "work" consists of sleeping for 
        ' about a second. Each thread "works" a little 
        ' longer, just to make the output more orderly.
        '
        Thread.Sleep(1000 + padding)

        Console.WriteLine("Thread {0} releases the semaphore.", num)
        Console.WriteLine("Thread {0} previous semaphore count: {1}", _
            num, _
            _pool.Release())
    End Sub
End Class

Remarks

Threads typically use the WaitOne method to enter the semaphore, and they typically use this method overload to exit.

If a SemaphoreFullException is thrown by the Release method, it does not necessarily indicate a problem with the calling thread. A programming error in another thread might have caused that thread to exit the semaphore more times than it entered.

If the current Semaphore object represents a named system semaphore, the user must have SemaphoreRights.Modify rights and the semaphore must have been opened with SemaphoreRights.Modify rights.

See also

Applies to

Release(Int32)

Source:
Semaphore.cs
Source:
Semaphore.cs
Source:
Semaphore.cs

Exits the semaphore a specified number of times and returns the previous count.

public:
 int Release(int releaseCount);
public int Release (int releaseCount);
member this.Release : int -> int
Public Function Release (releaseCount As Integer) As Integer

Parameters

releaseCount
Int32

The number of times to exit the semaphore.

Returns

The count on the semaphore before the Release method was called.

Exceptions

releaseCount is less than 1.

The semaphore count is already at the maximum value.

A Win32 error occurred with a named semaphore.

The current semaphore represents a named system semaphore, but the user does not have Modify rights.

-or-

The current semaphore represents a named system semaphore, but it was not opened with Modify rights.

Examples

The following code example creates a semaphore with a maximum count of three and an initial count of zero. The example starts five threads, which block waiting for the semaphore. The main thread uses the Release(Int32) method overload to increase the semaphore count to its maximum, allowing three threads to enter the semaphore. Each thread uses the Thread.Sleep method to wait for one second, to simulate work, and then calls the Release() method overload to release the semaphore.

Each time the semaphore is released, the previous semaphore count is displayed. Console messages track semaphore use. The simulated work interval is increased slightly for each thread, to make the output easier to read.

#using <System.dll>
using namespace System;
using namespace System::Threading;

public ref class Example
{
private:
   // A semaphore that simulates a limited resource pool.
   //
   static Semaphore^ _pool;

   // A padding interval to make the output more orderly.
   static int _padding;

public:
   static void Main()
   {
      // Create a semaphore that can satisfy up to three
      // concurrent requests. Use an initial count of zero,
      // so that the entire semaphore count is initially
      // owned by the main program thread.
      //
      _pool = gcnew Semaphore( 0,3 );
      
      // Create and start five numbered threads.
      //
      for ( int i = 1; i <= 5; i++ )
      {
         Thread^ t = gcnew Thread(
            gcnew ParameterizedThreadStart( Worker ) );
         
         // Start the thread, passing the number.
         //
         t->Start( i );
      }
      
      // Wait for half a second, to allow all the
      // threads to start and to block on the semaphore.
      //
      Thread::Sleep( 500 );
      
      // The main thread starts out holding the entire
      // semaphore count. Calling Release(3) brings the
      // semaphore count back to its maximum value, and
      // allows the waiting threads to enter the semaphore,
      // up to three at a time.
      //
      Console::WriteLine( L"Main thread calls Release(3)." );
      _pool->Release( 3 );

      Console::WriteLine( L"Main thread exits." );
   }

private:
   static void Worker( Object^ num )
   {
      // Each worker thread begins by requesting the
      // semaphore.
      Console::WriteLine( L"Thread {0} begins and waits for the semaphore.", num );
      _pool->WaitOne();
      
      // A padding interval to make the output more orderly.
      int padding = Interlocked::Add( _padding, 100 );

      Console::WriteLine( L"Thread {0} enters the semaphore.", num );
      
      // The thread's "work" consists of sleeping for
      // about a second. Each thread "works" a little
      // longer, just to make the output more orderly.
      //
      Thread::Sleep( 1000 + padding );

      Console::WriteLine( L"Thread {0} releases the semaphore.", num );
      Console::WriteLine( L"Thread {0} previous semaphore count: {1}",
         num, _pool->Release() );
   }
};
using System;
using System.Threading;

public class Example
{
    // A semaphore that simulates a limited resource pool.
    //
    private static Semaphore _pool;

    // A padding interval to make the output more orderly.
    private static int _padding;

    public static void Main()
    {
        // Create a semaphore that can satisfy up to three
        // concurrent requests. Use an initial count of zero,
        // so that the entire semaphore count is initially
        // owned by the main program thread.
        //
        _pool = new Semaphore(initialCount: 0, maximumCount: 3);

        // Create and start five numbered threads. 
        //
        for(int i = 1; i <= 5; i++)
        {
            Thread t = new Thread(new ParameterizedThreadStart(Worker));

            // Start the thread, passing the number.
            //
            t.Start(i);
        }

        // Wait for half a second, to allow all the
        // threads to start and to block on the semaphore.
        //
        Thread.Sleep(500);

        // The main thread starts out holding the entire
        // semaphore count. Calling Release(3) brings the 
        // semaphore count back to its maximum value, and
        // allows the waiting threads to enter the semaphore,
        // up to three at a time.
        //
        Console.WriteLine("Main thread calls Release(3).");
        _pool.Release(releaseCount: 3);

        Console.WriteLine("Main thread exits.");
    }

    private static void Worker(object num)
    {
        // Each worker thread begins by requesting the
        // semaphore.
        Console.WriteLine("Thread {0} begins " +
            "and waits for the semaphore.", num);
        _pool.WaitOne();

        // A padding interval to make the output more orderly.
        int padding = Interlocked.Add(ref _padding, 100);

        Console.WriteLine("Thread {0} enters the semaphore.", num);
        
        // The thread's "work" consists of sleeping for 
        // about a second. Each thread "works" a little 
        // longer, just to make the output more orderly.
        //
        Thread.Sleep(1000 + padding);

        Console.WriteLine("Thread {0} releases the semaphore.", num);
        Console.WriteLine("Thread {0} previous semaphore count: {1}",
            num, _pool.Release());
    }
}
Imports System.Threading

Public Class Example

    ' A semaphore that simulates a limited resource pool.
    '
    Private Shared _pool As Semaphore

    ' A padding interval to make the output more orderly.
    Private Shared _padding As Integer

    <MTAThread> _
    Public Shared Sub Main()
        ' Create a semaphore that can satisfy up to three
        ' concurrent requests. Use an initial count of zero,
        ' so that the entire semaphore count is initially
        ' owned by the main program thread.
        '
        _pool = New Semaphore(0, 3)

        ' Create and start five numbered threads. 
        '
        For i As Integer = 1 To 5
            Dim t As New Thread(New ParameterizedThreadStart(AddressOf Worker))
            'Dim t As New Thread(AddressOf Worker)

            ' Start the thread, passing the number.
            '
            t.Start(i)
        Next i

        ' Wait for half a second, to allow all the
        ' threads to start and to block on the semaphore.
        '
        Thread.Sleep(500)

        ' The main thread starts out holding the entire
        ' semaphore count. Calling Release(3) brings the 
        ' semaphore count back to its maximum value, and
        ' allows the waiting threads to enter the semaphore,
        ' up to three at a time.
        '
        Console.WriteLine("Main thread calls Release(3).")
        _pool.Release(3)

        Console.WriteLine("Main thread exits.")
    End Sub

    Private Shared Sub Worker(ByVal num As Object)
        ' Each worker thread begins by requesting the
        ' semaphore.
        Console.WriteLine("Thread {0} begins " _
            & "and waits for the semaphore.", num)
        _pool.WaitOne()

        ' A padding interval to make the output more orderly.
        Dim padding As Integer = Interlocked.Add(_padding, 100)

        Console.WriteLine("Thread {0} enters the semaphore.", num)
        
        ' The thread's "work" consists of sleeping for 
        ' about a second. Each thread "works" a little 
        ' longer, just to make the output more orderly.
        '
        Thread.Sleep(1000 + padding)

        Console.WriteLine("Thread {0} releases the semaphore.", num)
        Console.WriteLine("Thread {0} previous semaphore count: {1}", _
            num, _
            _pool.Release())
    End Sub
End Class

Remarks

If a thread has entered the semaphore multiple times, this method overload allows the entire semaphore count to be restored with one call.

If a SemaphoreFullException is thrown by the Release method, it does not necessarily indicate a problem with the calling thread. A programming error in another thread might have caused that thread to exit the semaphore more times than it entered.

If the current Semaphore object represents a named system semaphore, the user must have SemaphoreRights.Modify rights and the semaphore must have been opened with SemaphoreRights.Modify rights.

See also

Applies to