Trace.Assert Method
Definition
Important
Some information relates to prerelease product that may be substantially modified before it’s released. Microsoft makes no warranties, express or implied, with respect to the information provided here.
Checks for a condition; if the condition is false
, outputs messages and displays a message box that shows the call stack.
Overloads
Assert(Boolean) |
Checks for a condition; if the condition is |
Assert(Boolean, String) |
Checks for a condition; if the condition is |
Assert(Boolean, String, String) |
Checks for a condition; if the condition is |
Assert(Boolean)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
Checks for a condition; if the condition is false
, displays a message box that shows the call stack.
public:
static void Assert(bool condition);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition);
[<System.Diagnostics.Conditional("TRACE")>]
static member Assert : bool -> unit
Public Shared Sub Assert (condition As Boolean)
Parameters
- condition
- Boolean
The conditional expression to evaluate. If the condition is true
, a failure message is not sent and the message box is not displayed.
- Attributes
Examples
The following example creates an index for an array. Then some action is performed that sets the value of the index. Next the code calls Assert to verify the index value is valid. If it is not valid, the Assert outputs the call stack.
protected:
// Create an index for an array.
int index;
void Method()
{
// Perform some action that sets the index.
// Test that the index value is valid.
#if defined(TRACE)
Trace::Assert( index > -1 );
#endif
}
// Create an index for an array.
int index;
void Method()
{
// Perform some action that sets the index.
// Test that the index value is valid.
Trace.Assert(index > -1);
}
' Create an index for an array.
Protected index As Integer
Protected Sub Method()
' Perform some action that sets the index.
' Test that the index value is valid.
Trace.Assert(index > -1)
End Sub
Remarks
Use the Trace.Assert method if you want to do assertions in release builds. The Debug.Assert method works only in debug builds. For more information, see Assertions in Managed Code.
Typically, the Assert(Boolean) method is used to identify logic errors during program development. Assert(Boolean) evaluates the condition. If the result is false
, it sends a failure message to the Listeners collection. You can customize this behavior by adding a TraceListener to, or removing one from, the Listeners collection.
When the application runs in user-interface mode, it displays a message box that shows the call stack with file and line numbers. The message box contains three buttons: Abort, Retry, and Ignore. Clicking the Abort button terminates the application. Clicking Retry sends you to the code in the debugger if your application is running in a debugger, or offers to open a debugger if it is not. Clicking Ignore continues with the next instruction in the code.
Note
The display of the message box depends on the presence of the DefaultTraceListener. If the DefaultTraceListener is not in the Listeners collection, the message box is not displayed. The DefaultTraceListener can be removed by calling the Clear method on the Listeners property (System.Diagnostics.Trace.Listeners.Clear()
). For .NET Framework apps, you can also use the <clear> element and the <remove> element in your app's configuration file.
For .NET Framework apps, you can change the behavior of the DefaultTraceListener in the configuration file that corresponds to the name of your application. In this file, you can enable and disable the assert message box or set the DefaultTraceListener.LogFileName property. The configuration file should be formatted as follows:
<configuration>
<system.diagnostics>
<switches>
<add name="mySwitch" value="4"/>
</switches>
<trace autoflush="false" indentsize="4"/>
<assert assertuienabled="true" logfilename=".\TraceLog.txt"/>
</system.diagnostics>
</configuration>
See also
Applies to
Assert(Boolean, String)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
Checks for a condition; if the condition is false
, outputs a specified message and displays a message box that shows the call stack.
public:
static void Assert(bool condition, System::String ^ message);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition, string? message);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition, string? message = default);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition, string message);
[<System.Diagnostics.Conditional("TRACE")>]
static member Assert : bool * string -> unit
Public Shared Sub Assert (condition As Boolean, message As String)
Public Shared Sub Assert (condition As Boolean, Optional message As String = Nothing)
Parameters
- condition
- Boolean
The conditional expression to evaluate. If the condition is true
, the specified message is not sent and the message box is not displayed.
- Attributes
Examples
The following example checks to see that the type
parameter is valid. If the type
passed in is null
, the Assert outputs a message.
public:
static void MyMethod( Type^ type, Type^ baseType )
{
#if defined(TRACE)
Trace::Assert( type != nullptr, "Type parameter is null" );
#endif
// Perform some processing.
}
public static void MyMethod(Type type, Type baseType)
{
Trace.Assert(type != null, "Type parameter is null");
// Perform some processing.
}
Public Shared Sub MyMethod(type As Type, baseType As Type)
Trace.Assert( Not (type Is Nothing), "Type parameter is null")
' Perform some processing.
End Sub
Remarks
Use the Trace.Assert method if you want to do assertions in release builds. The Debug.Assert method works only in debug builds. For more information, see Assertions in Managed Code.
Typically, the Assert(Boolean, String) method is used to identify logic errors during program development. Assert(Boolean, String) evaluates the condition. If the result is false
, it sends the specified diagnostic message to the Listeners collection. You can customize this behavior by adding a TraceListener to, or removing one from, the Listeners collection.
When the application runs in user-interface mode, it displays a message box that shows the call stack with file and line numbers. The message box contains three buttons: Abort, Retry, and Ignore. Clicking the Abort button terminates the application. Clicking Retry sends you to the code in the debugger if your application is running in a debugger, or offers to open a debugger if it is not. Clicking Ignore continues with the next instruction in the code.
Note
The display of the message box depends on the presence of the DefaultTraceListener. If the DefaultTraceListener is not in the Listeners collection, the message box is not displayed. The DefaultTraceListener can be removed by calling the Clear method on the Listeners property (System.Diagnostics.Trace.Listeners.Clear()
). For .NET Framework apps, you can also use the <clear> element and the <remove> element in your app's configuration file.
For .NET Framework apps, you can change the behavior of the DefaultTraceListener in the configuration file that corresponds to the name of your application. In this file, you can enable and disable the assert message box or set the DefaultTraceListener.LogFileName property. The configuration file should be formatted as follows:
<configuration>
<system.diagnostics>
<switches>
<add name="mySwitch" value="4"/>
</switches>
<trace autoflush="false" indentsize="4"/>
<assert assertuienabled="true" logfilename=".\TraceLog.txt"/>
</system.diagnostics>
</configuration>
See also
Applies to
Assert(Boolean, String, String)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
Checks for a condition; if the condition is false
, outputs two specified messages and displays a message box that shows the call stack.
public:
static void Assert(bool condition, System::String ^ message, System::String ^ detailMessage);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition, string? message, string? detailMessage);
[System.Diagnostics.Conditional("TRACE")]
public static void Assert (bool condition, string message, string detailMessage);
[<System.Diagnostics.Conditional("TRACE")>]
static member Assert : bool * string * string -> unit
Public Shared Sub Assert (condition As Boolean, message As String, detailMessage As String)
Parameters
- condition
- Boolean
The conditional expression to evaluate. If the condition is true
, the specified messages are not sent and the message box is not displayed.
- Attributes
Examples
The following example checks to see that the type
parameter is valid. If the type
passed in is null
, the Assert outputs a message.
public:
static void MyMethod( Type^ type, Type^ baseType )
{
#if defined(TRACE)
Trace::Assert( type != nullptr, "Type parameter is null", "Can't get object for null type" );
#endif
// Perform some processing.
}
public static void MyMethod(Type type, Type baseType)
{
Trace.Assert(type != null, "Type parameter is null",
"Can't get object for null type");
// Perform some processing.
}
Public Shared Sub MyMethod(type As Type, baseType As Type)
Trace.Assert( Not (type Is Nothing), "Type parameter is null", _
"Can't get object for null type")
' Perform some processing.
End Sub
Remarks
Use the Trace.Assert method if you want to do assertions in release builds. The Debug.Assert method works only in debug builds. For more information, see Assertions in Managed Code.
Typically, the Assert(Boolean, String, String) method is used to identify logic errors during program development. Assert evaluates the condition. If the result is false
, it sends the specified diagnostic message and detailed message to the Listeners collection. You can customize this behavior by adding a TraceListener to, or removing one from, the Listeners collection.
When the application runs in user-interface mode, it displays a message box that shows the call stack with file and line numbers. The message box contains three buttons: Abort, Retry, and Ignore. Clicking the Abort button terminates the application. Clicking Retry sends you to the code in the debugger if your application is running in a debugger, or offers to open a debugger if it is not. Clicking Ignore continues with the next instruction in the code.
Note
The display of the message box depends on the presence of the DefaultTraceListener. If the DefaultTraceListener is not in the Listeners collection, the message box is not displayed. The DefaultTraceListener can be removed by calling the Clear method on the Listeners property (System.Diagnostics.Trace.Listeners.Clear()
). For .NET Framework apps, you can also use the <clear> element and the <remove> element in your app's configuration file.
For .NET Framework apps, you can change the behavior of the DefaultTraceListener in the configuration file that corresponds to the name of your application. In this file, you can enable and disable the assert message box or set the DefaultTraceListener.LogFileName property. The configuration file should be formatted as follows:
<configuration>
<system.diagnostics>
<switches>
<add name="mySwitch" value="4"/>
</switches>
<trace autoflush="false" indentsize="4"/>
<assert assertuienabled="true" logfilename=".\TraceLog.txt"/>
</system.diagnostics>
</configuration>