Redigera

Dela via


PipeStream.Read Method

Definition

Overloads

Read(Span<Byte>)

Reads a sequence of bytes from the current stream, writes them to a byte array, and advances the position within the stream by the number of bytes read.

Read(Byte[], Int32, Int32)

Reads a block of bytes from a stream and writes the data to a specified buffer starting at a specified position for a specified length.

Read(Span<Byte>)

Source:
PipeStream.Unix.cs
Source:
PipeStream.Unix.cs
Source:
PipeStream.Unix.cs

Reads a sequence of bytes from the current stream, writes them to a byte array, and advances the position within the stream by the number of bytes read.

public:
 override int Read(Span<System::Byte> buffer);
public override int Read (Span<byte> buffer);
override this.Read : Span<byte> -> int
Public Overrides Function Read (buffer As Span(Of Byte)) As Integer

Parameters

buffer
Span<Byte>

A region of memory. When this method returns, the contents of this region are replaced by the bytes read from the current source.

Returns

The total number of bytes read into the buffer. This can be less than the number of bytes allocated in buffer if that many bytes are not currently available, or zero (0) if the end of the stream has been reached.

Exceptions

The number of bytes read was longer than the buffer length.

The stream does not support reading.

Cannot access a closed pipe.

The pipe hasn't been connected yet.

-or-

The pipe is in a disconnected state.

-or-

The pipe handle has not been set. (Did your PipeStream implementation call InitializeHandle(SafePipeHandle, Boolean, Boolean)?

Remarks

Use the CanRead property to determine whether the current PipeStream object supports read operations.

Use the ReadAsync method to read asynchronously from the current stream.

This method reads a maximum of buffer.Length bytes from the current stream and stores them in buffer. The current position within the stream is advanced by the number of bytes read; however, if an exception occurs, the current position within the stream remains unchanged.

This method will block until at least one byte of data can be read, in the event that no data is available.

This method returns 0 only when there is no more data in the stream and no more is expected (such as a closed socket or end of file).

This method is free to return fewer bytes than requested even if the end of the stream has not been reached.

Use BinaryReader for reading primitive data types.

Applies to

Read(Byte[], Int32, Int32)

Source:
PipeStream.Unix.cs
Source:
PipeStream.Unix.cs
Source:
PipeStream.Unix.cs

Reads a block of bytes from a stream and writes the data to a specified buffer starting at a specified position for a specified length.

public:
 override int Read(cli::array <System::Byte> ^ buffer, int offset, int count);
public override int Read (byte[] buffer, int offset, int count);
[System.Security.SecurityCritical]
public override int Read (byte[] buffer, int offset, int count);
override this.Read : byte[] * int * int -> int
[<System.Security.SecurityCritical>]
override this.Read : byte[] * int * int -> int
Public Overrides Function Read (buffer As Byte(), offset As Integer, count As Integer) As Integer

Parameters

buffer
Byte[]

When this method returns, contains the specified byte array with the values between offset and (offset + count - 1) replaced by the bytes read from the current source.

offset
Int32

The byte offset in the buffer array at which the bytes that are read will be placed.

count
Int32

The maximum number of bytes to read.

Returns

The total number of bytes that are read into buffer. This might be less than the number of bytes requested if that number of bytes is not currently available, or 0 if the end of the stream is reached.

Attributes

Exceptions

buffer is null.

offset is less than 0.

-or-

count is less than 0.

count is greater than the number of bytes available in buffer.

The pipe is closed.

The pipe does not support read operations.

The pipe is disconnected, waiting to connect, or the handle has not been set.

Any I/O error occurred.

Examples

The following example creates an anonymous pipe client and pipe server. The pipe server uses the Read method to read a series of bytes from the pipe client as a validation code. Both the pipe client and the pipe server are part of the same example. The server portion of the example creates a client process and passes it an anonymous pipe handle as an argument.

#using <System.dll>
#using <System.Core.dll>

using namespace System;
using namespace System::IO;
using namespace System::IO::Pipes;
using namespace System::Diagnostics;

ref class PipeStreamExample
{
private:
    static array<Byte>^ matchSign = {9, 0, 9, 0};

public:
    static void Main()
    {
        array<String^>^ args = Environment::GetCommandLineArgs();
        if (args->Length < 2)
        {
            Process^ clientProcess = gcnew Process();

            clientProcess->StartInfo->FileName = Environment::CommandLine;

            AnonymousPipeServerStream^ pipeServer =
                gcnew AnonymousPipeServerStream(PipeDirection::In,
                HandleInheritability::Inheritable);
            // Pass the client process a handle to the server.
            clientProcess->StartInfo->Arguments = pipeServer->GetClientHandleAsString();
            clientProcess->StartInfo->UseShellExecute = false;
            Console::WriteLine("[SERVER] Starting client process...");
            clientProcess->Start();

            pipeServer->DisposeLocalCopyOfClientHandle();

            try
            {
                if (WaitForClientSign(pipeServer))
                {
                    Console::WriteLine("[SERVER] Valid sign code received!");
                }
                else
                {
                    Console::WriteLine("[SERVER] Invalid sign code received!");
                }
            }
            catch (IOException^ e)
            {
                 Console::WriteLine("[SERVER] Error: {0}", e->Message);
            }
            clientProcess->WaitForExit();
            clientProcess->Close();
            Console::WriteLine("[SERVER] Client quit. Server terminating.");
        }
        else
        {
            PipeStream^ pipeClient =
                gcnew AnonymousPipeClientStream(PipeDirection::Out, args[1]);
            try
            {
                Console::WriteLine("[CLIENT] Sending sign code...");
                SendClientSign(pipeClient);
            }
            catch (IOException^ e)
            {
                Console::WriteLine("[CLIENT] Error: {0}", e->Message);
            }
            Console::WriteLine("[CLIENT] Terminating.");
        }
    }

private:
    static bool WaitForClientSign(PipeStream^ inStream)
    {
        array<Byte>^ inSign = gcnew array<Byte>(matchSign->Length);
        int len = inStream->Read(inSign, 0, matchSign->Length);
        bool valid = len == matchSign->Length;

        while (valid && len-- > 0)
        {
            valid = valid && (matchSign[len] == inSign[len]);
        }
        return valid;
    }

    static void SendClientSign(PipeStream^ outStream)
    {
        outStream->Write(matchSign, 0, matchSign->Length);
    }
};

int main()
{
    PipeStreamExample::Main();
}
using System;
using System.IO;
using System.IO.Pipes;
using System.Diagnostics;

class PipeStreamExample
{
    private static byte[] matchSign = {9, 0, 9, 0};

    public static void Main()
    {
        string[] args = Environment.GetCommandLineArgs();
        if (args.Length < 2)
        {
            Process clientProcess = new Process();

            clientProcess.StartInfo.FileName = Environment.CommandLine;

            using (AnonymousPipeServerStream pipeServer =
                new AnonymousPipeServerStream(PipeDirection.In,
                HandleInheritability.Inheritable))
            {
                // Pass the client process a handle to the server.
                clientProcess.StartInfo.Arguments = pipeServer.GetClientHandleAsString();
                clientProcess.StartInfo.UseShellExecute = false;
                Console.WriteLine("[SERVER] Starting client process...");
                clientProcess.Start();

                pipeServer.DisposeLocalCopyOfClientHandle();

                try
                {
                    if (WaitForClientSign(pipeServer))
                    {
                        Console.WriteLine("[SERVER] Valid sign code received!");
                    }
                    else
                    {
                        Console.WriteLine("[SERVER] Invalid sign code received!");
                    }
                }
                catch (IOException e)
                {
                    Console.WriteLine("[SERVER] Error: {0}", e.Message);
                }
            }
            clientProcess.WaitForExit();
            clientProcess.Close();
            Console.WriteLine("[SERVER] Client quit. Server terminating.");
        }
        else
        {
            using (PipeStream pipeClient = new AnonymousPipeClientStream(PipeDirection.Out, args[1]))
            {
                try
                {
                    Console.WriteLine("[CLIENT] Sending sign code...");
                    SendClientSign(pipeClient);
                }
                catch (IOException e)
                {
                     Console.WriteLine("[CLIENT] Error: {0}", e.Message);
                }
            }
            Console.WriteLine("[CLIENT] Terminating.");
        }
    }

    private static bool WaitForClientSign(PipeStream inStream)
    {
        byte[] inSign = new byte[matchSign.Length];
        int len = inStream.Read(inSign, 0, matchSign.Length);
        bool valid = len == matchSign.Length;

        while (valid && len-- > 0)
        {
            valid = valid && (matchSign[len] == inSign[len]);
        }
        return valid;
    }

    private static void SendClientSign(PipeStream outStream)
    {
        outStream.Write(matchSign, 0, matchSign.Length);
    }
}
Imports System.IO
Imports System.IO.Pipes
Imports System.Diagnostics

Class PipeStreamExample
    Private Shared matchSign() As Byte = {9, 0, 9, 0}

    Public Shared Sub Main()
        Dim args() As String = Environment.GetCommandLineArgs()
        If args.Length < 2 Then
            Dim clientProcess As New Process()

            clientProcess.StartInfo.FileName = Environment.CommandLine

            Using pipeServer As New AnonymousPipeServerStream( _
                PipeDirection.In, HandleInheritability.Inheritable)

                ' Pass the client process a handle to the server.
                clientProcess.StartInfo.Arguments = pipeServer.GetClientHandleAsString()
                clientProcess.StartInfo.UseShellExecute = false
                Console.WriteLine("[SERVER] Starting client process...")
                clientProcess.Start()

                pipeServer.DisposeLocalCopyOfClientHandle()

                Try
                    If WaitForClientSign(pipeServer) Then
                        Console.WriteLine("[SERVER] Valid sign code received!")
                    Else
                        Console.WriteLine("[SERVER] Invalid sign code received!")
                    End If
                Catch e As IOException
                    Console.WriteLine("[SERVER] Error: {0}", e.Message)
                End Try
            End Using
            clientProcess.WaitForExit()
            clientProcess.Close()
            Console.WriteLine("[SERVER] Client quit. Server terminating.")
        Else
            Using pipeClient As PipeStream = New AnonymousPipeClientStream(PipeDirection.Out, args(1))
                Try
                    Console.WriteLine("[CLIENT] Sending sign code...")
                    SendClientSign(pipeClient)
                Catch e As IOException
                    Console.WriteLine("[CLIENT] Error: {0}", e.Message)
                End Try
            End Using
            Console.WriteLine("[CLIENT] Terminating.")
        End If
    End Sub

    Private Shared Function WaitForClientSign(inStream As PipeStream) As Boolean
        Dim inSign() As Byte = Array.CreateInstance(GetType(Byte), matchSign.Length)
        Dim len As Integer = inStream.Read(inSign, 0, matchSign.Length)
        Dim valid = len.Equals(matchSign.Length)

        While len > 0
            len -= 1
            valid = valid And (matchSign(len).Equals(inSign(len)))
        End While
        Return valid
    End Function

    Private Shared Sub SendClientSign(outStream As PipeStream)
        outStream.Write(matchSign, 0, matchSign.Length)
    End Sub
End Class

Remarks

Use the CanRead property to determine whether the current PipeStream object supports read operations.

Calling the Read method blocks until count bytes are read or the end of the stream is reached. For asynchronous read operations, see BeginRead and EndRead.

Applies to