Redigera

Dela via


SmtpClient.Dispose Method

Definition

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, and releases all resources used by the current instance of the SmtpClient class.

Overloads

Dispose()

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, and releases all resources used by the current instance of the SmtpClient class.

Dispose(Boolean)

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, releases all resources used by the current instance of the SmtpClient class, and optionally disposes of the managed resources.

Remarks

The connection established by the current instance of the SmtpClient class to the SMTP server may be re-used if an application wishes to send multiple messages to the same SMTP server. This is particularly useful when authentication or encryption are used establish a connection to the SMTP server. The process of authenticating and establishing a TLS session can be expensive operations. A requirement to re-establish a connection for each message when sending a large quantity of email to the same SMTP server could have a significant impact on performance. There are a number of high-volume email applications that send email status updates, newsletter distributions, or email alerts. Also many email client applications support an off-line mode where users can compose many email messages that are sent later when a connection to the SMTP server is established. It is typical for an email client to send all SMTP messages to a specific SMTP server (provided by the Internet service provider) that then forwards this email to other SMTP servers.

The SmtpClient class implementation pools SMTP connections so that it can avoid the overhead of re-establishing a connection for every message to the same server. An application may re-use the same SmtpClient object to send many different emails to the same SMTP server and to many different SMTP servers. As a result, there is no way to determine when an application is finished using the SmtpClient object and it should be cleaned up.

When an SMTP session is finished and the client wishes to terminate the connection, it must send a QUIT message to the server to indicate that it has no more messages to send. This allows the server to free up resources associated with the connection from the client and process the messages which were sent by the client.

The Dispose methods iterates through all established connections and send a QUIT message to each SMTP server, followed by gracefully ending the TCP connection. These methods also release the unmanaged resources used by the Socket and optionally dispose of the managed resources.

Dispose()

Source:
SmtpClient.cs
Source:
SmtpClient.cs
Source:
SmtpClient.cs

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, and releases all resources used by the current instance of the SmtpClient class.

public:
 virtual void Dispose();
public void Dispose ();
abstract member Dispose : unit -> unit
override this.Dispose : unit -> unit
Public Sub Dispose ()

Implements

Remarks

The connection established by the current instance of the SmtpClient class to the SMTP server may be re-used if an application wishes to send multiple messages to the same SMTP server. This is particularly useful when authentication or encryption are used establish a connection to the SMTP server. The process of authenticating and establishing a TLS session can be expensive operations. A requirement to re-establish a connection for each message when sending a large quantity of email to the same SMTP server could have a significant impact on performance. There are a number of high-volume email applications that send email status updates, newsletter distributions, or email alerts. Also many email client applications support an off-line mode where users can compose many email messages that are sent later when a connection to the SMTP server is established. It is typical for an email client to send all SMTP messages to a specific SMTP server (provided by the Internet service provider) that then forwards this email to other SMTP servers.

The SmtpClient class implementation pools SMTP connections so that it can avoid the overhead of re-establishing a connection for every message to the same server. An application may re-use the same SmtpClient object to send many different emails to the same SMTP server and to many different SMTP servers. As a result, there is no way to determine when an application is finished using the SmtpClient object and it should be cleaned up.

When an SMTP session is finished and the client wishes to terminate the connection, it must send a QUIT message to the server to indicate that it has no more messages to send. This allows the server to free up resources associated with the connection from the client and process the messages which were sent by the client.

Calling the Dispose method on a SmtpClient object that is executing an asynchronous SendAsync operation will cancel the send operation as though the SendAsyncCancel method had been called.

The SmtpClient class has no Finalize method. So an application must call Dispose to explicitly free up resources.

The Dispose method iterates through all established connections to the SMTP server specified in the Host property and sends a QUIT message followed by gracefully ending the TCP connection. The Dispose method also releases the unmanaged resources used by the underlying Socket.

Call Dispose when you are finished using the SmtpClient. The Dispose method leaves the SmtpClient in an unusable state. After calling Dispose, you must release all references to the SmtpClient so the garbage collector can reclaim the memory that the SmtpClient was occupying.

For more information, see Cleaning Up Unmanaged Resources and Implementing a Dispose Method.

Note

Always call Dispose before you release your last reference to the SmtpClient. Otherwise, the resources it is using will not be freed so the garbage collector can reclaim the memory.

Applies to

Dispose(Boolean)

Source:
SmtpClient.cs
Source:
SmtpClient.cs
Source:
SmtpClient.cs

Sends a QUIT message to the SMTP server, gracefully ends the TCP connection, releases all resources used by the current instance of the SmtpClient class, and optionally disposes of the managed resources.

protected:
 virtual void Dispose(bool disposing);
protected virtual void Dispose (bool disposing);
abstract member Dispose : bool -> unit
override this.Dispose : bool -> unit
Protected Overridable Sub Dispose (disposing As Boolean)

Parameters

disposing
Boolean

true to release both managed and unmanaged resources; false to releases only unmanaged resources.

Remarks

The connection established by the current instance of the SmtpClient class to the SMTP server may be re-used if an application wishes to send multiple messages to the same SMTP server. This is particularly useful when authentication or encryption are used establish a connection to the SMTP server. The process of authenticating and establishing a TLS session can be expensive operations. A requirement to re-establish a connection for each message when sending a large quantity of email to the same SMTP server could have a significant impact on performance. There are a number of high-volume email applications that send email status updates, newsletter distributions, or email alerts. Also many email client applications support an off-line mode where users can compose many email messages that are sent later when a connection to the SMTP server is established. It is typical for an email client to send all SMTP messages to a specific SMTP server (provided by the Internet service provider) that then forwards this email to other SMTP servers.

The SmtpClient class implementation pools SMTP connections so that it can avoid the overhead of re-establishing a connection for every message to the same server. An application may re-use the same SmtpClient object to send many different emails to the same SMTP server and to many different SMTP servers. As a result, there is no way to determine when an application is finished using the SmtpClient object and it should be cleaned up.

When an SMTP session is finished and the client wishes to terminate the connection, it must send a QUIT message to the server to indicate that it has no more messages to send. This allows the server to free up resources associated with the connection from the client and process the messages which were sent by the client.

Calling the Dispose method on a SmtpClient object that is executing an asynchronous SendAsync operation will cancel the send operation as though the SendAsyncCancel method had been called.

The SmtpClient class has no Finalize method. So an application must call Dispose to explicitly free up resources.

The Dispose method iterates through all established connections to the SMTP server specified in the Host property and sends a QUIT message followed by gracefully ending the TCP connection. The Dispose method also releases the unmanaged resources used by the Socket and optionally disposes of the managed resources.

Call Dispose when you are finished using the SmtpClient. The Dispose method leaves the SmtpClient in an unusable state. After calling Dispose, you must release all references to the SmtpClient so the garbage collector can reclaim the memory that the SmtpClient was occupying.

For more information, see Cleaning Up Unmanaged Resources and Implementing a Dispose Method.

Note

Always call Dispose before you release your last reference to the SmtpClient. Otherwise, the resources it is using will not be freed so the garbage collector can reclaim the memory.

Applies to