az batch job
Note
This command group has commands that are defined in both Azure CLI and at least one extension. Install each extension to benefit from its extended capabilities. Learn more about extensions.
Manage Batch jobs.
Commands
| Name | Description | Type | Status |
|---|---|---|---|
| az batch job create |
Add a job to a Batch account. |
Core | GA |
| az batch job create (azure-batch-cli-extensions extension) |
Add a job and associated task(s) to a Batch account. |
Extension | GA |
| az batch job delete |
Deletes a Job. |
Core | GA |
| az batch job disable |
Disables the specified Job, preventing new Tasks from running. |
Core | GA |
| az batch job enable |
Enables the specified Job, allowing new Tasks to run. |
Core | GA |
| az batch job list |
List all of the jobs or job schedule in a Batch account. |
Core | GA |
| az batch job prep-release-status |
View the status of Batch job preparation and release tasks. |
Core | GA |
| az batch job prep-release-status list |
Lists the execution status of the Job Preparation and Job Release Task for the specified Job across the Compute Nodes where the Job has run. |
Core | GA |
| az batch job reset |
Update the properties of a Batch job. Unspecified properties which can be updated are reset to their defaults. |
Core | GA |
| az batch job set |
Update the properties of a Batch job. Updating a property in a subgroup will reset the unspecified properties of that group. |
Core | GA |
| az batch job show |
Gets information about the specified Job. |
Core | GA |
| az batch job stop |
Stop a running Batch job. |
Core | GA |
| az batch job task-counts |
View the number of tasks and slots in a Batch job and their states. |
Core | GA |
| az batch job task-counts show |
Gets the Task counts for the specified Job. |
Core | GA |
az batch job create
Add a job to a Batch account.
az batch job create [--account-endpoint]
[--account-key]
[--account-name]
[--allow-task-preemption]
[--id]
[--job-manager-task-command-line]
[--job-manager-task-environment-settings]
[--job-manager-task-id]
[--job-manager-task-resource-files]
[--job-max-task-retry-count]
[--job-max-wall-clock-time]
[--json-file]
[--max-parallel-tasks]
[--metadata]
[--pool-id]
[--priority]
[--required-slots]
[--uses-task-dependencies]Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
Whether Tasks in this job can be preempted by other high priority jobs. If the value is set to True, other high priority jobs submitted to the system will take precedence and will be able requeue tasks from this job. You can update a job's allowTaskPreemption after it has been created using the update job API. True if flag present.
Required. The ID can contain any combination of alphanumeric characters including hyphens and underscores, and cannot contain more than 64 characters. The ID is case-preserving and case-insensitive (that is, you may not have two IDs within an Account that differ only by case).
Required. The command line does not run under a shell, and therefore cannot take advantage of shell features such as environment variable expansion. If you want to take advantage of such features, you should invoke the shell in the command line, for example using "cmd /c MyCommand" in Windows or "/bin/sh -c MyCommand" in Linux. If the command line refers to file paths, it should use a relative path (relative to the Task working directory), or use the Batch provided environment variable (https://docs.microsoft.com/en-us/azure/batch/batch-compute-node-environment-variables).
Space-separated values in 'key=value' format.
Required. The ID can contain any combination of alphanumeric characters including hyphens and underscores and cannot contain more than 64 characters.
Files listed under this element are located in the Task's working directory. There is a maximum size for the list of resource files. When the max size is exceeded, the request will fail and the response error code will be RequestEntityTooLarge. If this occurs, the collection of ResourceFiles must be reduced in size. This can be achieved using .zip files, Application Packages, or Docker Containers. Space-separated resource references in filename=httpurl format.
The maximum number of times each Task may be retried. The Batch service retries a Task if its exit code is nonzero. Note that this value specifically controls the number of retries. The Batch service will try each Task once, and may then retry up to this limit. For example, if the maximum retry count is 3, Batch tries a Task up to 4 times (one initial try and 3 retries). If the maximum retry count is 0, the Batch service does not retry Tasks. If the maximum retry count is -1, the Batch service retries Tasks without limit. The default value is 0 (no retries).
If the Job does not complete within the time limit, the Batch service terminates it and any Tasks that are still running. In this case, the termination reason will be MaxWallClockTimeExpiry. If this property is not specified, there is no time limit on how long the Job may run. Expected format is an ISO-8601 duration.
A file containing the job specification in JSON (formatted to match the respective REST API body). If this parameter is specified, all 'Job Arguments' are ignored.
The maximum number of tasks that can be executed in parallel for the job. The value of maxParallelTasks must be -1 or greater than 0 if specified. If not specified, the default value is -1, which means there's no limit to the number of tasks that can be run at once. You can update a job's maxParallelTasks after it has been created using the update job API. Default value: -1 .
The Batch service does not assign any meaning to metadata; it is solely for the use of user code. Space-separated values in 'key=value' format.
The id of an existing pool. All the tasks of the job will run on the specified pool.
The priority of the Job. Priority values can range from -1000 to 1000, with -1000 being the lowest priority and 1000 being the highest priority. The default value is 0.
The number of scheduling slots that the Task requires to run. The default is 1. A Task can only be scheduled to run on a compute node if the node has enough free scheduling slots available. For multi-instance Tasks, this property is not supported and must not be specified.
Whether Tasks in the Job can define dependencies on each other. The default is false. True if flag present.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job create (azure-batch-cli-extensions extension)
Add a job and associated task(s) to a Batch account.
az batch job create [--account-endpoint]
[--account-key]
[--account-name]
[--allow-task-preemption]
[--id]
[--job-manager-task-command-line]
[--job-manager-task-environment-settings]
[--job-manager-task-id]
[--job-manager-task-resource-files]
[--job-max-task-retry-count]
[--job-max-wall-clock-time]
[--json-file]
[--max-parallel-tasks]
[--metadata]
[--parameters]
[--pool-id]
[--priority]
[--required-slots]
[--resource-group]
[--template]
[--uses-task-dependencies]Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
The Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
The Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
Whether Tasks in this job can be preempted by other high priority jobs. If the value is set to True, other high priority jobs submitted to the system will take precedence and will be able requeue tasks from this job. You can update a job's allowTaskPreemption after it has been created using the update job API.
Required. The ID can contain any combination of alphanumeric characters including hyphens and underscores, and cannot contain more than 64 characters. The ID is case-preserving and case-insensitive (that is, you may not have two IDs within an Account that differ only by case).
The command line of the Job Manager task. The command line does not run under a shell, and therefore cannot take advantage of shell features such as environment variable expansion. If you want to take advantage of such features, you should invoke the shell in the command line, for example using "cmd /c MyCommand" in Windows or "/bin/sh -c MyCommand" in Linux.
A list of environment variable settings for the Job Manager task. Space separated values in 'key=value' format.
A string that uniquely identifies the Job Manager task within the job. The id can contain any combination of alphanumeric characters including hyphens and underscores and cannot contain more than 64 characters.
A list of files that the Batch service will download to the compute node before running the command line. Files listed under this element are located in the task's working directory. Space separated resource references in filename=httpurl format.
The maximum number of times each task may be retried. The Batch service retries a task if its exit code is nonzero. Note that this value specifically controls the number of retries. The Batch service will try each task once, and may then retry up to this limit. For example, if the maximum retry count is 3, Batch tries a task up to 4 times (one initial try and 3 retries). If the maximum retry count is 0, the Batch service does not retry tasks. If the maximum retry count is -1, the Batch service retries tasks without limit. The default value is 0 (no retries).
The maximum elapsed time that the job may run, measured from the time the job is created. If the job does not complete within the time limit, the Batch service terminates it and any tasks that are still running. In this case, the termination reason will be MaxWallClockTimeExpiry. If this property is not specified, there is no time limit on how long the job may run. Expected format is an ISO-8601 duration.
A file containing the job specification in JSON (formatted to match the respective REST API body). If this parameter is specified, all 'Job Arguments' are ignored.
The maximum number of tasks that can be executed in parallel for the job. The value of maxParallelTasks must be -1 or greater than 0 if specified. If not specified, the default value is -1, which means there's no limit to the number of tasks that can be run at once. You can update a job's maxParallelTasks after it has been created using the update job API. Default value: -1 .
The Batch service does not assign any meaning to metadata; it is solely for the use of user code.
Parameter values for a Batch job JSON template file. Can only be used with --template.
The id of an existing pool. All the tasks of the job will run on the specified pool.
The priority of the Job. Priority values can range from -1000 to 1000, with -1000 being the lowest priority and 1000 being the highest priority. The default value is 0.
The number of scheduling slots that the Task requires to run. The default is 1. A Task can only be scheduled to run on a compute node if the node has enough free scheduling slots available. For multi-instance Tasks, this property is not supported and must not be specified.
The resource group of the Batch account.
A Batch job JSON template file. If this parameter is specified, all other parameters are ignored.
The flag that determines if this job will use tasks with dependencies. True if flag present.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job delete
Deletes a Job.
Deleting a Job also deletes all Tasks that are part of that Job, and all Job statistics. This also overrides the retention period for Task data; that is, if the Job contains Tasks which are still retained on Compute Nodes, the Batch services deletes those Tasks' working directories and all their contents. When a Delete Job request is received, the Batch service sets the Job to the deleting state. All update operations on a Job that is in deleting state will fail with status code 409 (Conflict), with additional information indicating that the Job is being deleted.
az batch job delete --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]
[--yes]Required Parameters
The ID of the Job to delete.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
Do not prompt for confirmation.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job disable
Disables the specified Job, preventing new Tasks from running.
The Batch Service immediately moves the Job to the disabling state. Batch then uses the disableTasks parameter to determine what to do with the currently running Tasks of the Job. The Job remains in the disabling state until the disable operation is completed and all Tasks have been dealt with according to the disableTasks option; the Job then moves to the disabled state. No new Tasks are started under the Job until it moves back to active state. If you try to disable a Job that is in any state other than active, disabling, or disabled, the request fails with status code 409.
az batch job disable --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--disable-tasks]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]Required Parameters
The ID of the Job to disable.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
Possible values include: 'requeue', 'terminate', 'wait'.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job enable
Enables the specified Job, allowing new Tasks to run.
When you call this API, the Batch service sets a disabled Job to the enabling state. After the this operation is completed, the Job moves to the active state, and scheduling of new Tasks under the Job resumes. The Batch service does not allow a Task to remain in the active state for more than 180 days. Therefore, if you enable a Job containing active Tasks which were added more than 180 days ago, those Tasks will not run.
az batch job enable --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]Required Parameters
The ID of the Job to enable.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job list
List all of the jobs or job schedule in a Batch account.
az batch job list [--account-endpoint]
[--account-key]
[--account-name]
[--expand]
[--filter]
[--job-schedule-id]
[--select]Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
The Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
The Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
An OData $expand clause.
An OData $filter clause.
The ID of the job schedule from which you want to get a list of jobs. If omitted, lists all jobs in the account.
An OData $select clause.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job reset
Update the properties of a Batch job. Unspecified properties which can be updated are reset to their defaults.
az batch job reset --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--allow-task-preemption]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]
[--job-max-task-retry-count]
[--job-max-wall-clock-time]
[--json-file]
[--max-parallel-tasks]
[--metadata]
[--on-all-tasks-complete {noaction, terminatejob}]
[--pool-id]
[--priority]Required Parameters
The ID of the Job whose properties you want to update.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
Whether Tasks in this job can be preempted by other high priority jobs. If the value is set to True, other high priority jobs submitted to the system will take precedence and will be able requeue tasks from this job. You can update a job's allowTaskPreemption after it has been created using the update job API. True if flag present.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
The maximum number of times each Task may be retried. The Batch service retries a Task if its exit code is nonzero. Note that this value specifically controls the number of retries. The Batch service will try each Task once, and may then retry up to this limit. For example, if the maximum retry count is 3, Batch tries a Task up to 4 times (one initial try and 3 retries). If the maximum retry count is 0, the Batch service does not retry Tasks. If the maximum retry count is -1, the Batch service retries Tasks without limit. The default value is 0 (no retries).
If the Job does not complete within the time limit, the Batch service terminates it and any Tasks that are still running. In this case, the termination reason will be MaxWallClockTimeExpiry. If this property is not specified, there is no time limit on how long the Job may run. Expected format is an ISO-8601 duration.
A file containing the job update parameter specification in JSON (formatted to match the respective REST API body). If this parameter is specified, all 'Job Arguments' are ignored.
The maximum number of tasks that can be executed in parallel for the job. The value of maxParallelTasks must be -1 or greater than 0 if specified. If not specified, the default value is -1, which means there's no limit to the number of tasks that can be run at once. You can update a job's maxParallelTasks after it has been created using the update job API. Default value: -1 .
If omitted, it takes the default value of an empty list; in effect, any existing metadata is deleted. Space-separated values in 'key=value' format.
The action the Batch service should take when all Tasks in the Job are in the completed state. If omitted, the completion behavior is set to noaction. If the current value is terminatejob, this is an error because a Job's completion behavior may not be changed from terminatejob to noaction. You may not change the value from terminatejob to noaction - that is, once you have engaged automatic Job termination, you cannot turn it off again. If you try to do this, the request fails and Batch returns status code 400 (Bad Request) and an 'invalid property value' error response. If you do not specify this element in a PUT request, it is equivalent to passing noaction. This is an error if the current value is terminatejob.
The id of an existing pool. All the tasks of the job will run on the specified pool.
The priority of the Job. Priority values can range from -1000 to 1000, with -1000 being the lowest priority and 1000 being the highest priority. If omitted, it is set to the default value 0.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job set
Update the properties of a Batch job. Updating a property in a subgroup will reset the unspecified properties of that group.
az batch job set --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--allow-task-preemption]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]
[--job-max-task-retry-count]
[--job-max-wall-clock-time]
[--json-file]
[--max-parallel-tasks]
[--metadata]
[--on-all-tasks-complete {noaction, terminatejob}]
[--pool-id]
[--priority]Required Parameters
The ID of the Job whose properties you want to update.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
Whether Tasks in this job can be preempted by other high priority jobs. If the value is set to True, other high priority jobs submitted to the system will take precedence and will be able requeue tasks from this job. You can update a job's allowTaskPreemption after it has been created using the update job API. Specify either 'true' or 'false' to update the property.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
The maximum number of times each Task may be retried. The Batch service retries a Task if its exit code is nonzero. Note that this value specifically controls the number of retries. The Batch service will try each Task once, and may then retry up to this limit. For example, if the maximum retry count is 3, Batch tries a Task up to 4 times (one initial try and 3 retries). If the maximum retry count is 0, the Batch service does not retry Tasks. If the maximum retry count is -1, the Batch service retries Tasks without limit. The default value is 0 (no retries).
If the Job does not complete within the time limit, the Batch service terminates it and any Tasks that are still running. In this case, the termination reason will be MaxWallClockTimeExpiry. If this property is not specified, there is no time limit on how long the Job may run. Expected format is an ISO-8601 duration.
A file containing the job patch parameter specification in JSON (formatted to match the respective REST API body). If this parameter is specified, all 'Job Arguments' are ignored.
The maximum number of tasks that can be executed in parallel for the job. The value of maxParallelTasks must be -1 or greater than 0 if specified. If not specified, the default value is -1, which means there's no limit to the number of tasks that can be run at once. You can update a job's maxParallelTasks after it has been created using the update job API.
If omitted, the existing Job metadata is left unchanged. Space-separated values in 'key=value' format.
The action the Batch service should take when all Tasks in the Job are in the completed state. If omitted, the completion behavior is left unchanged. You may not change the value from terminatejob to noaction - that is, once you have engaged automatic Job termination, you cannot turn it off again. If you try to do this, the request fails with an 'invalid property value' error response; if you are calling the REST API directly, the HTTP status code is 400 (Bad Request).
The id of an existing pool. All the tasks of the job will run on the specified pool.
The priority of the Job. Priority values can range from -1000 to 1000, with -1000 being the lowest priority and 1000 being the highest priority. If omitted, the priority of the Job is left unchanged.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job show
Gets information about the specified Job.
az batch job show --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--expand]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]
[--select]Required Parameters
The ID of the Job.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
An OData $expand clause.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
An OData $select clause.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
az batch job stop
Stop a running Batch job.
Terminate the specified job, marking it as completed. When a Terminate Job request is received, the Batch service sets the job to the terminating state. The Batch service then terminates any running tasks associated with the job and runs any required job release tasks. Then the job moves into the completed state. If there are any tasks in the job in the active state, they will remain in the active state. Once a job is terminated, new tasks cannot be added and any remaining active tasks will not be scheduled.
az batch job stop --job-id
[--account-endpoint]
[--account-key]
[--account-name]
[--if-match]
[--if-modified-since]
[--if-none-match]
[--if-unmodified-since]
[--terminate-reason]Required Parameters
The ID of the Job to terminate.
Optional Parameters
Batch service endpoint. Alternatively, set by environment variable: AZURE_BATCH_ENDPOINT.
Batch account key. Alternatively, set by environment variable: AZURE_BATCH_ACCESS_KEY.
Batch account name. Alternatively, set by environment variable: AZURE_BATCH_ACCOUNT.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service exactly matches the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has been modified since the specified time.
An ETag value associated with the version of the resource known to the client. The operation will be performed only if the resource's current ETag on the service does not match the value specified by the client.
A timestamp indicating the last modified time of the resource known to the client. The operation will be performed only if the resource on the service has not been modified since the specified time.
Termination reason.
The text you want to appear as the job's TerminateReason. The default is 'UserTerminate'.
Global Parameters
Increase logging verbosity to show all debug logs.
Show this help message and exit.
Only show errors, suppressing warnings.
Output format.
JMESPath query string. See http://jmespath.org/ for more information and examples.
Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.
Increase logging verbosity. Use --debug for full debug logs.
Azure CLI