az managed-cassandra cluster

Reference

Note

This command group has commands that are defined in both Azure CLI and at least one extension. Install each extension to benefit from its extended capabilities. Learn more about extensions.

Azure Managed Cassandra Cluster.

Commands

Name	Description	Type	Status
az managed-cassandra cluster backup	Azure Managed Cassandra cluster Backup.	Extension	GA
az managed-cassandra cluster backup list	List the backups of this cluster that are available to restore.	Extension	Preview
az managed-cassandra cluster backup show	Get a managed cassandra backup resource of this cluster.	Extension	Preview
az managed-cassandra cluster create	Create a Managed Cassandra Cluster.	Core	GA
az managed-cassandra cluster create (cosmosdb-preview extension)	Create a Managed Cassandra Cluster.	Extension	GA
az managed-cassandra cluster deallocate	Deallocate the Managed Cassandra Cluster and Associated Data Centers. Deallocation will deallocate the host virtual machine of this cluster, and reserved the data disk. This won't do anything on an already deallocated cluster. Use Start to restart the cluster.	Core	GA
az managed-cassandra cluster deallocate (cosmosdb-preview extension)	Deallocate the Managed Cassandra Cluster and Associated Data Centers. Deallocation will deallocate the host virtual machine of this cluster, and reserved the data disk. This won't do anything on an already deallocated cluster. Use Start to restart the cluster.	Extension	GA
az managed-cassandra cluster delete	Deletes a Managed Cassandra Cluster.	Core	GA
az managed-cassandra cluster delete (cosmosdb-preview extension)	Deletes a Managed Cassandra Cluster.	Extension	GA
az managed-cassandra cluster invoke-command	Invoke a command like nodetool for cassandra maintenance.	Core	GA
az managed-cassandra cluster list	List the Managed Cassandra Clusters in a ResourceGroup and Subscription. If the ResourceGroup is not specified all the clusters in this Subscription are returned.	Core	GA
az managed-cassandra cluster list (cosmosdb-preview extension)	List the Managed Cassandra Clusters in a ResourceGroup and Subscription. If the ResourceGroup is not specified all the clusters in this Subscription are returned.	Extension	GA
az managed-cassandra cluster show	Get a Managed Cassandra Cluster Resource.	Core	GA
az managed-cassandra cluster show (cosmosdb-preview extension)	Get a Managed Cassandra Cluster Resource.	Extension	GA
az managed-cassandra cluster start	Start the Managed Cassandra Cluster and Associated Data Centers. Start will start the host virtual machine of this cluster with reserved data disk. This won't do anything on an already running cluster. Use Deallocate to deallocate the cluster.	Core	GA
az managed-cassandra cluster status	Gets the CPU, memory, and disk usage statistics for each Cassandra node in a cluster.	Core	GA
az managed-cassandra cluster update	Update a Managed Cassandra Cluster.	Core	GA
az managed-cassandra cluster update (cosmosdb-preview extension)	Update a Managed Cassandra Cluster.	Extension	GA

az managed-cassandra cluster create

Create a Managed Cassandra Cluster.

az managed-cassandra cluster create --cluster-name
                                    --delegated-management-subnet-id
                                    --location
                                    --resource-group
                                    [--authentication-method {Cassandra, None}]
                                    [--cassandra-version]
                                    [--client-certificates]
                                    [--cluster-name-override]
                                    [--external-gossip-certificates]
                                    [--external-seed-nodes]
                                    [--hours-between-backups]
                                    [--identity-type {None, SystemAssigned}]
                                    [--initial-cassandra-admin-password]
                                    [--no-wait]
                                    [--repair-enabled {false, true}]
                                    [--restore-from-backup-id]
                                    [--tags]

Examples

Create a Managed Cassandra Cluster in a given Subscription and ResourceGroup. Either a cassandra admin password or external seed needs are required.

az managed-cassandra cluster create \
--resource-group MyResourceGroup \
--cluster-name MyCluster \
--location MyLocation \
--initial-cassandra-admin-password password \
--delegated-management-subnet-id /subscriptions/94d9b402-77b4-4049-b4c1-947bc6b7729b/resourceGroups/My-vnet/providers/Microsoft.Network/virtualNetworks/test-vnet/subnets/test-subnet

Required Parameters

--cluster-name -c

Cluster Name.

--delegated-management-subnet-id -s

The resource id of a subnet where the ip address of the cassandra management server will be allocated. This subnet must have connectivity to the delegated_subnet_id subnet of each data center.

--location -l

Azure Location of the Cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--authentication-method

Authentication mode can be None or Cassandra. If None, no authentication will be required to connect to the Cassandra API. If Cassandra, then passwords will be used.

Accepted values: Cassandra, None

--cassandra-version

The version of Cassandra chosen.

--client-certificates

If specified, enables client certificate authentication to the Cassandra API.

--cluster-name-override

If a cluster must have a name that is not a valid azure resource name, this field can be specified to choose the Cassandra cluster name. Otherwise, the resource name will be used as the cluster name.

--external-gossip-certificates -e

A list of certificates that the managed cassandra data center's should accept.

--external-seed-nodes

A list of ip addresses of the seed nodes of on-premise data centers.

--hours-between-backups

The number of hours between backup attempts.

--identity-type

Type of identity used for Customer Managed Disk Key.

Accepted values: None, SystemAssigned

Default value: None

--initial-cassandra-admin-password -i

The intial password to be configured when a cluster is created for authentication_method Cassandra.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--repair-enabled

Enables automatic repair.

Accepted values: false, true

--restore-from-backup-id

The resource id of a backup. If provided on create, the backup will be used to prepopulate the cluster. The cluster data center count and node counts must match the backup.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster create (cosmosdb-preview extension)

Create a Managed Cassandra Cluster.

az managed-cassandra cluster create --cluster-name
                                    --delegated-management-subnet-id
                                    --location
                                    --resource-group
                                    [--authentication-method {Cassandra, Ldap, None}]
                                    [--cassandra-version]
                                    [--client-certificates]
                                    [--cluster-name-override]
                                    [--cluster-type {NonProduction, Production}]
                                    [--extensions]
                                    [--external-gossip-certificates]
                                    [--external-seed-nodes]
                                    [--hours-between-backups]
                                    [--identity-type {None, SystemAssigned}]
                                    [--initial-cassandra-admin-password]
                                    [--no-wait]
                                    [--repair-enabled]
                                    [--restore-from-backup-id]
                                    [--tags]

Examples

Create a Managed Cassandra Cluster in a given Subscription and ResourceGroup. Either a cassandra admin password or external seed needs are required.

az managed-cassandra cluster create \
--resource-group MyResourceGroup \
--cluster-name MyCluster \
--location MyLocation \
--initial-cassandra-admin-password password \
--delegated-management-subnet-id /subscriptions/94d9b402-77b4-4049-b4c1-947bc6b7729b/resourceGroups/My-vnet/providers/Microsoft.Network/virtualNetworks/test-vnet/subnets/test-subnet

Required Parameters

--cluster-name -c

Cluster Name.

--delegated-management-subnet-id -s

The resource id of a subnet where the ip address of the cassandra management server will be allocated. This subnet must have connectivity to the delegated_subnet_id subnet of each data center.

--location -l

Azure Location of the Cluster.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--authentication-method

Authentication mode can be None, Cassandra or Ldap. If None, no authentication will be required to connect to the Cassandra API. If Cassandra, then passwords will be used. Ldap is in preview.

Accepted values: Cassandra, Ldap, None

--cassandra-version

The version of Cassandra chosen.

--client-certificates

If specified, enables client certificate authentication to the Cassandra API.

--cluster-name-override

If a cluster must have a name that is not a valid azure resource name, this field can be specified to choose the Cassandra cluster name. Otherwise, the resource name will be used as the cluster name.

--cluster-type

Type of the cluster, can be Production or NonProduction. If set to Production, operations on cluster might have restrictions.

Accepted values: NonProduction, Production

Default value: Production

--extensions

A set of extensions that will be effective on the cluster. It will replace the entire set of extensions with new set. Use "" to remove all. Now Available: cassandra-lucene-index.

--external-gossip-certificates -e

A list of certificates that the managed cassandra data center's should accept.

--external-seed-nodes

A list of ip addresses of the seed nodes of on-premise data centers.

--hours-between-backups

The number of hours between backup attempts.

--identity-type

Type of identity used for Customer Managed Disk Key.

Accepted values: None, SystemAssigned

Default value: None

--initial-cassandra-admin-password -i

The intial password to be configured when a cluster is created for authentication_method Cassandra.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--repair-enabled

Enables automatic repair.

--restore-from-backup-id

The resource id of a backup. If provided on create, the backup will be used to prepopulate the cluster. The cluster data center count and node counts must match the backup.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster deallocate

Deallocate the Managed Cassandra Cluster and Associated Data Centers. Deallocation will deallocate the host virtual machine of this cluster, and reserved the data disk. This won't do anything on an already deallocated cluster. Use Start to restart the cluster.

az managed-cassandra cluster deallocate --cluster-name
                                        --resource-group
                                        [--no-wait]

Examples

This command deallocates this cluster.

az managed-cassandra cluster deallocate --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster deallocate (cosmosdb-preview extension)

az managed-cassandra cluster deallocate --cluster-name
                                        --resource-group
                                        [--force]
                                        [--no-wait]
                                        [--yes]

Examples

This command deallocates this cluster.

az managed-cassandra cluster deallocate --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--force -f

Force to deallocate the cluster.

Default value: false

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--yes -y

Do not prompt for confirmation.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster delete

Deletes a Managed Cassandra Cluster.

az managed-cassandra cluster delete --cluster-name
                                    --resource-group
                                    [--no-wait]
                                    [--yes]

Examples

Deletes a Managed Cassandra Cluster in the given Subscription and ResourceGroup.

az managed-cassandra cluster delete --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--yes -y

Do not prompt for confirmation.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster delete (cosmosdb-preview extension)

Deletes a Managed Cassandra Cluster.

az managed-cassandra cluster delete --cluster-name
                                    --resource-group
                                    [--no-wait]
                                    [--yes]

Examples

Deletes a Managed Cassandra Cluster in the given Subscription and ResourceGroup.

az managed-cassandra cluster delete --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--yes -y

Do not prompt for confirmation.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster invoke-command

Invoke a command like nodetool for cassandra maintenance.

az managed-cassandra cluster invoke-command --cluster-name
                                            --command-name
                                            --host
                                            --resource-group
                                            [--arguments]
                                            [--cassandra-stop-start {false, true}]
                                            [--no-wait]
                                            [--readwrite {false, true}]

Examples

This command runs nodetool with these arguments in a host node of the cluster.

az managed-cassandra cluster invoke-command --resource-group MyResourceGroup --cluster-name MyCluster --host "10.0.1.12" --command-name "nodetool" --arguments arg1="value1" arg2="value2" arg3="value3"

Required Parameters

--cluster-name -c

Cluster Name.

--command-name

The command which should be run.

--host

IP address of the cassandra host to run the command on.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--arguments

The key="value" of arguments for the command.

--cassandra-stop-start

If true, stops cassandra before executing the command and then start it again.

Accepted values: false, true

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--readwrite

If true, allows the command to write to the cassandra directory, otherwise read-only.

Accepted values: false, true

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster list

List the Managed Cassandra Clusters in a ResourceGroup and Subscription. If the ResourceGroup is not specified all the clusters in this Subscription are returned.

az managed-cassandra cluster list [--resource-group]

Examples

List all Managed Cassandra Clusters in a given Subscription and ResourceGroup.

az managed-cassandra cluster list --resource-group MyResourceGroup

List all Managed Cassandra Clusters in a given Subscription.

az managed-cassandra cluster list

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster list (cosmosdb-preview extension)

List the Managed Cassandra Clusters in a ResourceGroup and Subscription. If the ResourceGroup is not specified all the clusters in this Subscription are returned.

az managed-cassandra cluster list [--resource-group]

Examples

List all Managed Cassandra Clusters in a given Subscription and ResourceGroup.

az managed-cassandra cluster list --resource-group MyResourceGroup

List all Managed Cassandra Clusters in a given Subscription.

az managed-cassandra cluster list

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster show

Get a Managed Cassandra Cluster Resource.

az managed-cassandra cluster show --cluster-name
                                  --resource-group

Examples

Gets a Managed Cassandra Cluster Resource. ProvisioningState tells the state of this cluster. If the cluster doesnot exist a NotFound response is returned.

az managed-cassandra cluster show --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster show (cosmosdb-preview extension)

Get a Managed Cassandra Cluster Resource.

az managed-cassandra cluster show --cluster-name
                                  --resource-group

Examples

Gets a Managed Cassandra Cluster Resource. ProvisioningState tells the state of this cluster. If the cluster doesnot exist a NotFound response is returned.

az managed-cassandra cluster show --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster start

Start the Managed Cassandra Cluster and Associated Data Centers. Start will start the host virtual machine of this cluster with reserved data disk. This won't do anything on an already running cluster. Use Deallocate to deallocate the cluster.

az managed-cassandra cluster start --cluster-name
                                   --resource-group
                                   [--no-wait]

Examples

This command starts this cluster.

az managed-cassandra cluster start --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster status

Gets the CPU, memory, and disk usage statistics for each Cassandra node in a cluster.

az managed-cassandra cluster status --cluster-name
                                    --resource-group

Examples

Gets the CPU, memory, and disk usage statistics for each Cassandra node in a cluster.

az managed-cassandra cluster status --resource-group MyResourceGroup --cluster-name MyCluster

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster update

Update a Managed Cassandra Cluster.

az managed-cassandra cluster update --cluster-name
                                    --resource-group
                                    [--authentication-method {Cassandra, None}]
                                    [--cassandra-version]
                                    [--client-certificates]
                                    [--external-gossip-certificates]
                                    [--external-seed-nodes]
                                    [--hours-between-backups]
                                    [--identity-type {None, SystemAssigned}]
                                    [--no-wait]
                                    [--repair-enabled {false, true}]
                                    [--tags]

Examples

Update External Seed Nodes of a given cluster.

az managed-cassandra cluster update --resource-group MyResourceGroup --cluster-name MyCluster --external-seed-nodes 127.0.0.1 127.0.0.2

Update External Gossip Certificates of a given cluster. Certs can be passed in as strings or the file locations.

az managed-cassandra cluster update --resource-group MyResourceGroup --cluster-name MyCluster --external-gossip-certificates C:/MyFolder/test.pem BeginCert-MLXCF-EndCert

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--authentication-method

Authentication mode can be None or Cassandra. If None, no authentication will be required to connect to the Cassandra API. If Cassandra, then passwords will be used.

Accepted values: Cassandra, None

--cassandra-version

The version of Cassandra chosen.

--client-certificates

If specified, enables client certificate authentication to the Cassandra API.

--external-gossip-certificates -e

A list of certificates that the managed cassandra data center's should accept.

--external-seed-nodes

A list of ip addresses of the seed nodes of on-premise data centers.

--hours-between-backups

The number of hours between backup attempts.

--identity-type

Type of identity used for Customer Managed Disk Key.

Accepted values: None, SystemAssigned

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--repair-enabled

Enables automatic repair.

Accepted values: false, true

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az managed-cassandra cluster update (cosmosdb-preview extension)

Update a Managed Cassandra Cluster.

az managed-cassandra cluster update --cluster-name
                                    --resource-group
                                    [--authentication-method {Cassandra, Ldap, None}]
                                    [--cassandra-version]
                                    [--client-certificates]
                                    [--cluster-type {NonProduction, Production}]
                                    [--extensions]
                                    [--external-gossip-certificates]
                                    [--external-seed-nodes]
                                    [--hours-between-backups]
                                    [--identity-type {None, SystemAssigned}]
                                    [--no-wait]
                                    [--repair-enabled]
                                    [--tags]

Examples

Update External Seed Nodes of a given cluster.

az managed-cassandra cluster update --resource-group MyResourceGroup --cluster-name MyCluster --external-seed-nodes 127.0.0.1 127.0.0.2

Update External Gossip Certificates of a given cluster. Certs can be passed in as strings or the file locations.

az managed-cassandra cluster update --resource-group MyResourceGroup --cluster-name MyCluster --external-gossip-certificates C:/MyFolder/test.pem BeginCert-MLXCF-EndCert

Required Parameters

--cluster-name -c

Cluster Name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--authentication-method

Authentication mode can be None, Cassandra or Ldap. If None, no authentication will be required to connect to the Cassandra API. If Cassandra, then passwords will be used. Ldap is in preview.

Accepted values: Cassandra, Ldap, None

--cassandra-version

The version of Cassandra chosen.

--client-certificates

If specified, enables client certificate authentication to the Cassandra API.

--cluster-type

Type of the cluster, can be Production or NonProduction. If set to Production, operations on cluster might have restrictions.

Accepted values: NonProduction, Production

--extensions

A set of extensions that will be effective on the cluster. It will replace the entire set of extensions with new set. Use "" to remove all. Now Available: cassandra-lucene-index.

--external-gossip-certificates -e

A list of certificates that the managed cassandra data center's should accept.

--external-seed-nodes

A list of ip addresses of the seed nodes of on-premise data centers.

--hours-between-backups

The number of hours between backup attempts.

--identity-type

Type of identity used for Customer Managed Disk Key.

Accepted values: None, SystemAssigned

--no-wait

Do not wait for the long-running operation to finish.

Default value: False

--repair-enabled

Enables automatic repair.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc

Default value: json

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

แชร์ผ่าน

az managed-cassandra cluster

Commands

az managed-cassandra cluster create

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster create (cosmosdb-preview extension)

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster deallocate

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster deallocate (cosmosdb-preview extension)

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster delete

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster delete (cosmosdb-preview extension)

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster invoke-command

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster list

Examples

Optional Parameters

az managed-cassandra cluster list (cosmosdb-preview extension)

Examples

Optional Parameters

az managed-cassandra cluster show

Examples

Required Parameters

az managed-cassandra cluster show (cosmosdb-preview extension)

Examples

Required Parameters

az managed-cassandra cluster start

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster status

Examples

Required Parameters

az managed-cassandra cluster update

Examples

Required Parameters

Optional Parameters

az managed-cassandra cluster update (cosmosdb-preview extension)

Examples

Required Parameters

Optional Parameters

แหล่งทรัพยากรเพิ่มเติม