แชร์ผ่าน

az network lb inbound-nat-rule

  • Reference

Manage inbound NAT rules of a load balancer.

Commands

Name Description Type Status
az network lb inbound-nat-rule create

Create an inbound NAT rule.

 Core GA
az network lb inbound-nat-rule delete

Delete an inbound NAT rule.

 Core GA
az network lb inbound-nat-rule list

List inbound NAT rules.

 Core GA
az network lb inbound-nat-rule show

Get the details of an inbound NAT rule.

 Core GA
az network lb inbound-nat-rule update

Update an inbound NAT rule.

 Core GA
az network lb inbound-nat-rule wait

Place the CLI in a waiting state until a condition is met.

 Core GA

az network lb inbound-nat-rule create

Edit

Create an inbound NAT rule.

az network lb inbound-nat-rule create --backend-port
                                      --lb-name
                                      --name
                                      --protocol {All, Tcp, Udp}
                                      --resource-group
                                      [--backend-address-pool]
                                      [--enable-floating-ip {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--enable-tcp-reset {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--frontend-ip]
                                      [--frontend-port]
                                      [--frontend-port-range-end]
                                      [--frontend-port-range-start]
                                      [--idle-timeout]
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Create a basic inbound NAT rule for port 80.

az network lb inbound-nat-rule create -g MyResourceGroup --lb-name MyLb -n MyNatRule --protocol Tcp --frontend-port 80 --backend-port 80

Create a basic inbound NAT rule for a specific frontend IP and enable floating IP for NAT Rule.

az network lb inbound-nat-rule create -g MyResourceGroup --lb-name MyLb -n MyNatRule --protocol Tcp --frontend-port 5432 --backend-port 3389 --frontend-ip MyFrontendIp --floating-ip true

Required Parameters

--backend-port

The port used for the internal endpoint. Acceptable values range from 1 to 65535.

--lb-name

The load balancer name.

--name -n

The name of the resource that is unique within the set of inbound NAT rules used by the load balancer.

--protocol

The reference to the transport protocol used by the load balancing rule.

Accepted values: All, Tcp, Udp
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--backend-address-pool --backend-pool-name

The name or ID of the backend address pool.

--enable-floating-ip --floating-ip

Configures a virtual machine's endpoint for the floating IP capability required to configure a SQL AlwaysOn Availability Group. This setting is required when using the SQL AlwaysOn Availability Groups in SQL server. This setting can't be changed after you create the endpoint.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--enable-tcp-reset

Receive bidirectional TCP Reset on TCP flow idle timeout or unexpected connection termination. This element is only used when the protocol is set to TCP.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--frontend-ip --frontend-ip-name

The name of ID of the frontend IP configuration.

--frontend-port

The port for the external endpoint. Port numbers for each rule must be unique within the Load Balancer. Acceptable values range from 1 to 65534.

--frontend-port-range-end

The port range end for the external endpoint. This property is used together with BackendAddressPool and FrontendPortRangeStart. Individual inbound NAT rule port mappings will be created for each backend address from BackendAddressPool. Acceptable values range from 1 to 65534.

--frontend-port-range-start

The port range start for the external endpoint. This property is used together with BackendAddressPool and FrontendPortRangeEnd. Individual inbound NAT rule port mappings will be created for each backend address from BackendAddressPool. Acceptable values range from 1 to 65534.

--idle-timeout --idle-timeout-in-minutes

The timeout for the TCP idle connection. The value can be set between 4 and 30 minutes. The default value is 4 minutes. This element is only used when the protocol is set to TCP.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network lb inbound-nat-rule delete

Edit

Delete an inbound NAT rule.

az network lb inbound-nat-rule delete --lb-name
                                      --name
                                      --resource-group
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]

Examples

Delete an inbound NAT rule.

az network lb inbound-nat-rule delete -g MyResourceGroup --lb-name MyLb -n MyNatRule

Required Parameters

--lb-name

The load balancer name.

--name -n

The name of the resource that is unique within the set of inbound NAT rules used by the load balancer.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network lb inbound-nat-rule list

Edit

List inbound NAT rules.

az network lb inbound-nat-rule list --lb-name
                                    --resource-group

Examples

List inbound NAT rules.

az network lb inbound-nat-rule list -g MyResourceGroup --lb-name MyLb

Required Parameters

--lb-name

The load balancer name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network lb inbound-nat-rule show

Edit

Get the details of an inbound NAT rule.

az network lb inbound-nat-rule show --lb-name
                                    --name
                                    --resource-group

Examples

Get the details of an inbound NAT rule.

az network lb inbound-nat-rule show -g MyResourceGroup --lb-name MyLb -n MyNatRule

Required Parameters

--lb-name

The load balancer name.

--name -n

The name of the resource that is unique within the set of inbound NAT rules used by the load balancer.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network lb inbound-nat-rule update

Edit

Update an inbound NAT rule.

az network lb inbound-nat-rule update --lb-name
                                      --name
                                      --resource-group
                                      [--add]
                                      [--backend-address-pool]
                                      [--backend-port]
                                      [--enable-floating-ip {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--enable-tcp-reset {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--frontend-ip]
                                      [--frontend-port]
                                      [--frontend-port-range-end]
                                      [--frontend-port-range-start]
                                      [--idle-timeout]
                                      [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                      [--protocol {All, Tcp, Udp}]
                                      [--remove]
                                      [--set]

Examples

Update an inbound NAT rule to disable floating IP and modify idle timeout duration.

az network lb inbound-nat-rule update -g MyResourceGroup --lb-name MyLb -n MyNatRule --floating-ip false --idle-timeout 5

Required Parameters

--lb-name

The load balancer name.

--name -n

The name of the resource that is unique within the set of inbound NAT rules used by the load balancer.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

--backend-address-pool --backend-pool-name

The name or ID of the backend address pool.

--backend-port

The port used for the internal endpoint. Acceptable values range from 1 to 65535.

--enable-floating-ip --floating-ip

Configures a virtual machine's endpoint for the floating IP capability required to configure a SQL AlwaysOn Availability Group. This setting is required when using the SQL AlwaysOn Availability Groups in SQL server. This setting can't be changed after you create the endpoint.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--enable-tcp-reset

Receive bidirectional TCP Reset on TCP flow idle timeout or unexpected connection termination. This element is only used when the protocol is set to TCP.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--frontend-ip --frontend-ip-name

The name of ID of the frontend IP configuration.

--frontend-port

The port for the external endpoint. Port numbers for each rule must be unique within the Load Balancer. Acceptable values range from 1 to 65534.

--frontend-port-range-end

The port range end for the external endpoint. This property is used together with BackendAddressPool and FrontendPortRangeStart. Individual inbound NAT rule port mappings will be created for each backend address from BackendAddressPool. Acceptable values range from 1 to 65534.

--frontend-port-range-start

The port range start for the external endpoint. This property is used together with BackendAddressPool and FrontendPortRangeEnd. Individual inbound NAT rule port mappings will be created for each backend address from BackendAddressPool. Acceptable values range from 1 to 65534.

--idle-timeout --idle-timeout-in-minutes

The timeout for the TCP idle connection. The value can be set between 4 and 30 minutes. The default value is 4 minutes. This element is only used when the protocol is set to TCP.

--no-wait

Do not wait for the long-running operation to finish.

Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--protocol

The reference to the transport protocol used by the load balancing rule.

Accepted values: All, Tcp, Udp
--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network lb inbound-nat-rule wait

Edit

Place the CLI in a waiting state until a condition is met.

az network lb inbound-nat-rule wait [--created]
                                    [--custom]
                                    [--deleted]
                                    [--exists]
                                    [--ids]
                                    [--interval]
                                    [--lb-name]
                                    [--resource-group]
                                    [--subscription]
                                    [--timeout]
                                    [--updated]

Optional Parameters

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--lb-name

The load balancer name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.