DataSet.CreateDataReader 方法

  • 参考

定义

命名空间:
System.Data
程序集:
System.Data.Common.dll
程序集:
System.Data.dll
程序集:
netstandard.dll

为每个 DataTableReader 返回带有一个结果集的 DataTable，顺序与 Tables 集合中表的显示顺序相同。

重载

CreateDataReader(DataTable[])

为每个 DataTableReader 返回带有一个结果集的 DataTable。
CreateDataReader()

为每个 DataTableReader 返回带有一个结果集的 DataTable，顺序与 Tables 集合中表的显示顺序相同。

示例

此示例控制台应用程序创建三DataTable个实例，并将每个实例添加到 。DataSet 该示例调用 CreateDataReader 方法并显示返回 DataTableReader的内容。 请注意，中 DataTableReader 结果集的顺序由作为参数传递的 DataTable 实例的顺序控制。

注意

此示例演示如何使用 的某个重载版本 CreateDataReader。 有关可能提供的其他示例，请参阅各个重载主题。

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
        dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    table.AcceptChanges();
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    table.AcceptChanges();
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}

Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
      dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  table.AcceptChanges()
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  table.AcceptChanges()
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

该示例在“控制台”窗口中显示以下代码：

注解

为了确保返回 DataTableReader的结果集在 内的顺序，如果 DataTable 中的 DataSet 为空，它将由返回 DataTableReader的 中的空结果集表示。

CreateDataReader(DataTable[])

Source:
DataSet.cs
Source:
DataSet.cs
Source:
DataSet.cs

为每个 DataTableReader 返回带有一个结果集的 DataTable。

public:
 System::Data::DataTableReader ^ CreateDataReader(... cli::array <System::Data::DataTable ^> ^ dataTables);
public System.Data.DataTableReader CreateDataReader (params System.Data.DataTable[] dataTables);
member this.CreateDataReader : System.Data.DataTable[] -> System.Data.DataTableReader
Public Function CreateDataReader (ParamArray dataTables As DataTable()) As DataTableReader

参数

dataTables
DataTable[]

一个 DataTable 数组，它提供要在 DataTableReader 中返回的结果集的顺序。

返回

DataTableReader

包含一个或多个结果集的 DataTableReader，与源 DataTable 中包含的 DataSet 实例相对应。 返回的结果集按 dataTables 参数所指定的顺序排列。

示例

此示例控制台应用程序创建三DataTable个实例，并将每个实例添加到 。DataSet 该示例调用 CreateDataReader 方法并显示返回 DataTableReader的内容。 请注意，中 DataTableReader 结果集的顺序由作为参数传递的 DataTable 实例的顺序控制。 该示例在控制台窗口中显示结果。

static DataTable customerTable;
static DataTable productTable;
static DataTable emptyTable;

static void Main()
{
    DataSet dataSet = new DataSet();

    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    emptyTable = new DataTable();
    productTable = GetProducts();
    customerTable = GetCustomers();

    dataSet.Tables.Add(customerTable);
    dataSet.Tables.Add(emptyTable);
    dataSet.Tables.Add(productTable);
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data.
    // Even though the dataset contains three DataTables,
    // this code will only display the contents of two of them,
    // because the code has limited the results to the
    // DataTables stored in the tables array. Because this
    // parameter is declared using the ParamArray keyword,
    // you could also include a list of DataTable instances
    // individually, as opposed to supplying an array of
    // DataTables, as in this example:
    using (DataTableReader reader =
       dataSet.CreateDataReader(productTable, emptyTable))
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}

Private emptyTable As DataTable
Private customerTable As DataTable
Private productTable As DataTable

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:

  emptyTable = New DataTable()
  productTable = GetProducts()
  customerTable = GetCustomers()

  dataSet.Tables.Add(customerTable)
  dataSet.Tables.Add(emptyTable)
  dataSet.Tables.Add(productTable)
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data.
  ' Even though the dataset contains three DataTables,
  ' this code will only display the contents of two of them,
  ' because the code has limited the results to the 
  ' DataTables stored in the tables array. Because this
  ' parameter is declared using the ParamArray keyword, 
  ' you could also include a list of DataTable instances 
  ' individually, as opposed to supplying an array of 
  ' DataTables, as in this example:
  Using reader As DataTableReader = _
    dataSet.CreateDataReader(productTable, emptyTable)
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

注解

为了确保返回 DataTableReader的结果集在 内的顺序，如果 DataTable 中的 DataSet 为空，则它由返回 DataTableReader的结果集中的空表示。 由于此重载版本允许将实例列表 DataTable 作为参数提供，因此可以指定结果集在返回 DataTableReader的 中显示的顺序。

另请参阅

适用于

CreateDataReader()

Source:
DataSet.cs
Source:
DataSet.cs
Source:
DataSet.cs

为每个 DataTableReader 返回带有一个结果集的 DataTable，顺序与 Tables 集合中表的显示顺序相同。

public:
 System::Data::DataTableReader ^ CreateDataReader();
public System.Data.DataTableReader CreateDataReader ();
member this.CreateDataReader : unit -> System.Data.DataTableReader
Public Function CreateDataReader () As DataTableReader

返回

DataTableReader

包含一个或多个结果集的 DataTableReader，与源 DataTable 中包含的 DataSet 实例相对应。

示例

以下示例创建三DataTable个实例，并将每个实例添加到 。DataSet 然后，该示例将填充 DataSet 的 传递给调用 CreateDataReader 方法的过程，并继续循环访问 中包含的 DataTableReader所有结果集。 该示例在控制台窗口中显示结果。

static void Main()
{
    DataSet dataSet = new DataSet();
    // Add some DataTables to the DataSet, including
    // an empty DataTable:
    dataSet.Tables.Add(GetCustomers());
    dataSet.Tables.Add(new DataTable());
    dataSet.Tables.Add(GetProducts());
    TestCreateDataReader(dataSet);

    Console.WriteLine("Press any key to continue.");
    Console.ReadKey();
}

private static void TestCreateDataReader(DataSet dataSet)
{
    // Given a DataSet, retrieve a DataTableReader
    // allowing access to all the DataSet's data:
    using (DataTableReader reader = dataSet.CreateDataReader())
    {
        do
        {
            if (!reader.HasRows)
            {
                Console.WriteLine("Empty DataTableReader");
            }
            else
            {
                PrintColumns(reader);
            }
            Console.WriteLine("========================");
        } while (reader.NextResult());
    }
}

private static DataTable GetCustomers()
{
    // Create sample Customers table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Mary" });
    table.Rows.Add(new object[] { 2, "Andy" });
    table.Rows.Add(new object[] { 3, "Peter" });
    table.Rows.Add(new object[] { 4, "Russ" });
    return table;
}

private static DataTable GetProducts()
{
    // Create sample Products table, in order
    // to demonstrate the behavior of the DataTableReader.
    DataTable table = new DataTable();

    // Create two columns, ID and Name.
    DataColumn idColumn = table.Columns.Add("ID", typeof(int));
    table.Columns.Add("Name", typeof(string));

    // Set the ID column as the primary key column.
    table.PrimaryKey = new DataColumn[] { idColumn };

    table.Rows.Add(new object[] { 1, "Wireless Network Card" });
    table.Rows.Add(new object[] { 2, "Hard Drive" });
    table.Rows.Add(new object[] { 3, "Monitor" });
    table.Rows.Add(new object[] { 4, "CPU" });
    return table;
}

private static void PrintColumns(DataTableReader reader)
{
    // Loop through all the rows in the DataTableReader
    while (reader.Read())
    {
        for (int i = 0; i < reader.FieldCount; i++)
        {
            Console.Write(reader[i] + " ");
        }
        Console.WriteLine();
    }
}

Sub Main()
  Dim dataSet As New DataSet
  ' Add some DataTables to the DataSet, including
  ' an empty DataTable:
  dataSet.Tables.Add(GetCustomers())
  dataSet.Tables.Add(New DataTable())
  dataSet.Tables.Add(GetProducts())
  TestCreateDataReader(dataSet)

  Console.WriteLine("Press any key to continue.")
  Console.ReadKey()
End Sub

Private Sub TestCreateDataReader(ByVal dataSet As DataSet)
  ' Given a DataSet, retrieve a DataTableReader
  ' allowing access to all the DataSet's data:
  Using reader As DataTableReader = dataSet.CreateDataReader()
    Do
      If Not reader.HasRows Then
        Console.WriteLine("Empty DataTableReader")
      Else
        PrintColumns(reader)
      End If
      Console.WriteLine("========================")
    Loop While reader.NextResult()
  End Using
End Sub

Private Function GetCustomers() As DataTable
  ' Create sample Customers table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Mary"})
  table.Rows.Add(New Object() {2, "Andy"})
  table.Rows.Add(New Object() {3, "Peter"})
  table.Rows.Add(New Object() {4, "Russ"})
  Return table
End Function

Private Function GetProducts() As DataTable
  ' Create sample Products table, in order
  ' to demonstrate the behavior of the DataTableReader.
  Dim table As New DataTable

  ' Create two columns, ID and Name.
  Dim idColumn As DataColumn = table.Columns.Add("ID", GetType(Integer))
  table.Columns.Add("Name", GetType(String))

  ' Set the ID column as the primary key column.
  table.PrimaryKey = New DataColumn() {idColumn}

  table.Rows.Add(New Object() {1, "Wireless Network Card"})
  table.Rows.Add(New Object() {2, "Hard Drive"})
  table.Rows.Add(New Object() {3, "Monitor"})
  table.Rows.Add(New Object() {4, "CPU"})
  Return table
End Function

Private Sub PrintColumns( _
   ByVal reader As DataTableReader)

  ' Loop through all the rows in the DataTableReader.
  Do While reader.Read()
    For i As Integer = 0 To reader.FieldCount - 1
      Console.Write(reader(i).ToString() & " ")
    Next
    Console.WriteLine()
  Loop
End Sub

注解

为了确保返回 DataTableReader的结果集在 内的顺序，如果 DataTable 中的 DataSet 为空，则它由返回 DataTableReader的 中的空结果集表示。

另请参阅

适用于