BinaryReader.ReadBytes(Int32) 方法

定义

命名空间:

System.IO

程序集:

System.Runtime.dll

Source:

BinaryReader.cs

从当前流中读取指定的字节数以写入字节数组中，并将当前位置前移相应的字节数。

public:
 virtual cli::array <System::Byte> ^ ReadBytes(int count);

public virtual byte[] ReadBytes (int count);

abstract member ReadBytes : int -> byte[]
override this.ReadBytes : int -> byte[]

Public Overridable Function ReadBytes (count As Integer) As Byte()

参数

count

Int32

要读取的字节数。 此值必须为 0 或非负数字，否则将出现异常。

返回

Byte[]

包含从基础流中读取的数据的字节数组。 如果到达了流的末尾，则该字节数组可能小于所请求的字节数。

例外

ArgumentException

要读取的解码字符数大于 count。 如果 Unicode 解码器返回回退字符或代理项对，则可能发生此情况。

IOException

出现 I/O 错误。

ObjectDisposedException

流已关闭。

ArgumentOutOfRangeException

count 为负数。

示例

下面的代码示例演示如何使用内存作为后备存储来编写二进制数据，然后验证数据是否已正确写入。

using namespace System;
using namespace System::IO;
int main()
{
   const int arrayLength = 1000;
   
   // Create random data to write to the stream.
   array<Byte>^dataArray = gcnew array<Byte>(arrayLength);
   (gcnew Random)->NextBytes( dataArray );
   BinaryWriter^ binWriter = gcnew BinaryWriter( gcnew MemoryStream );
   
   // Write the data to the stream.
   Console::WriteLine(  "Writing the data." );
   binWriter->Write( dataArray );
   
   // Create the reader using the stream from the writer.
   BinaryReader^ binReader = gcnew BinaryReader( binWriter->BaseStream );
   
   // Set the stream position to the beginning of the stream.
   binReader->BaseStream->Position = 0;
   
   // Read and verify the data.
   array<Byte>^verifyArray = binReader->ReadBytes( arrayLength );
   if ( verifyArray->Length != arrayLength )
   {
      Console::WriteLine( "Error writing the data." );
      return  -1;
   }

   for ( int i = 0; i < arrayLength; i++ )
   {
      if ( verifyArray[ i ] != dataArray[ i ] )
      {
         Console::WriteLine( "Error writing the data." );
         return  -1;
      }

   }
   Console::WriteLine( "The data was written and verified." );
}

using System;
using System.IO;

class BinaryRW
{
    static void Main()
    {
        const int arrayLength = 1000;

        // Create random data to write to the stream.
        byte[] dataArray = new byte[arrayLength];
        new Random().NextBytes(dataArray);

        BinaryWriter binWriter = new BinaryWriter(new MemoryStream());

        // Write the data to the stream.
        Console.WriteLine("Writing the data.");
        binWriter.Write(dataArray);

        // Create the reader using the stream from the writer.
        BinaryReader binReader =
            new BinaryReader(binWriter.BaseStream);

        // Set Position to the beginning of the stream.
        binReader.BaseStream.Position = 0;

        // Read and verify the data.
        byte[] verifyArray = binReader.ReadBytes(arrayLength);
        if(verifyArray.Length != arrayLength)
        {
            Console.WriteLine("Error writing the data.");
            return;
        }
        for(int i = 0; i < arrayLength; i++)
        {
            if(verifyArray[i] != dataArray[i])
            {
                Console.WriteLine("Error writing the data.");
                return;
            }
        }
        Console.WriteLine("The data was written and verified.");
    }
}

open System
open System.IO

let arrayLength = 1000

// Create random data to write to the stream.
let dataArray = Array.zeroCreate<byte> arrayLength
Random().NextBytes dataArray

let binWriter = new BinaryWriter(new MemoryStream())

// Write the data to the stream.ch
printfn "Writing the data."
binWriter.Write dataArray

// Create the reader using the stream from the writer.
let binReader = new BinaryReader(binWriter.BaseStream)

// Set Position to the beginning of the stream.
binReader.BaseStream.Position <- 0

// Read and verify the data.
let verifyArray = binReader.ReadBytes arrayLength
if verifyArray.Length <> arrayLength then
    printfn "Error writing the data."
else
    let mutable failed = false
    for i = 0 to arrayLength - 1 do
        if verifyArray[i] <> dataArray[i] then
            printfn "Error writing the data."
            failed <- true
    if not failed then
        printfn "The data was written and verified."

Imports System.IO

Public Class BinaryRW

    Shared Sub Main()
    
        Const upperBound As Integer = 1000

        ' Create random data to write to the stream.
        Dim dataArray(upperBound) As Byte
        Dim randomGenerator As New Random
        randomGenerator.NextBytes(dataArray)

        Dim binWriter As New BinaryWriter(New MemoryStream())

        ' Write the data to the stream.
        Console.WriteLine("Writing the data.")
        binWriter.Write(dataArray)

        ' Create the reader using the stream from the writer.
        Dim binReader As New BinaryReader(binWriter.BaseStream)

        ' Set the stream position to the beginning of the stream.
        binReader.BaseStream.Position = 0

        ' Read and verify the data.
        Dim verifyArray() As Byte = _
            binReader.ReadBytes(dataArray.Length)
        If verifyArray.Length <> dataArray.Length Then
            Console.WriteLine("Error writing the data.")
            Return
        End If
        For i As Integer = 0 To upperBound
            If verifyArray(i) <> dataArray(i) Then
                Console.WriteLine("Error writing the data.")
                Return
            End If
        Next i
        Console.WriteLine("The data was written and verified.")
    
    End Sub
End Class

此示例读取文件的内容，并将其作为转储文本显示在控制台中。 当从 ReadBytes 返回的数组的长度为零时，将检测到正在读取的文件的Byte末尾。

using System;
using System.IO;
using System.Text;

public class DumpFileSample
{
    private static readonly int CHUNK_SIZE = 1024;
    public static void Main(String[] args)
    {
        if ((args.Length == 0) || !File.Exists(args[0]))
        {
            Console.WriteLine("Please provide an existing file name.");
        }
        else
        {
            using (FileStream fs = new FileStream(args[0], FileMode.Open, FileAccess.Read))
            {
                using (BinaryReader br = new BinaryReader(fs, new ASCIIEncoding()))
                {
                    byte[] chunk;

                    chunk = br.ReadBytes(CHUNK_SIZE);
                    while(chunk.Length > 0)
                    {
                        DumpBytes(chunk, chunk.Length);
                        chunk = br.ReadBytes(CHUNK_SIZE);
                    }
                }
            }
        }
    }

    public static void DumpBytes(byte[] bdata, int len)
    {
        int i;
        int j = 0;
        char dchar;
        // 3 * 16 chars for hex display, 16 chars for text and 8 chars
        // for the 'gutter' int the middle.
        StringBuilder dumptext = new StringBuilder("        ", 16 * 4 + 8);
        for (i = 0; i < len; i++)
        {
            dumptext.Insert(j * 3, String.Format("{0:X2} ", (int)bdata[i]));
            dchar = (char)bdata[i];
            //' replace 'non-printable' chars with a '.'.
            if (Char.IsWhiteSpace(dchar) || Char.IsControl(dchar))
            {
                dchar = '.';
            }
            dumptext.Append(dchar);
            j++;
            if (j == 16)
            {
                Console.WriteLine(dumptext);
                dumptext.Length = 0;
                dumptext.Append("        ");
                j = 0;
            }
        }
        // display the remaining line
        if (j > 0)
        {
            for (i = j; i < 16; i++)
            {
                dumptext.Insert(j * 3, "   ");
            }
            Console.WriteLine(dumptext);
        }
    }
}

open System
open System.IO
open System.Text

let CHUNK_SIZE = 1024

let dumpBytes (bdata: byte[]) len =
    let mutable j = 0
    // 3 * 16 chars for hex display, 16 chars for text and 8 chars
    // for the 'gutter' int the middle.
    let dumptext = StringBuilder("        ", 16 * 4 + 8)
    for i = 0 to len - 1 do
        dumptext.Insert(j * 3, $"{int bdata[i]:X2} ") |> ignore
        let dchar = char bdata[i]
        //' replace 'non-printable' chars with a '.'.
        let dchar = 
            if Char.IsWhiteSpace dchar || Char.IsControl dchar then
                '.'
            else 
                dchar
        dumptext.Append dchar |> ignore
        j <- j + 1
        if j = 16 then
            printfn $"{dumptext}"
            dumptext.Length <- 0
            dumptext.Append "        " |> ignore
            j <- 0
    // display the remaining line
    if j > 0 then
        for i = j to 15 do
            dumptext.Insert(j * 3, "   ") |> ignore
        printfn $"{dumptext}"

[<EntryPoint>]
let main args =
    if args.Length = 0 || File.Exists args[0] |> not then
        printfn "Please provide an existing file name."
    else
        use fs = new FileStream(args[0], FileMode.Open, FileAccess.Read)
        use br = new BinaryReader(fs, ASCIIEncoding())
        
        let mutable chunk = br.ReadBytes CHUNK_SIZE
        while chunk.Length > 0 do
            dumpBytes chunk chunk.Length
            chunk <- br.ReadBytes CHUNK_SIZE
    0

Imports System.IO
Imports System.Text

Module Module1
    Private ReadOnly CHUNK_SIZE As Integer = 1024
    Public Sub Main(args() As String)
        If ((args.Length = 0) OrElse Not File.Exists(args(0))) Then
            Console.WriteLine("Please provide an existing file name.")
        Else
            Using fs As FileStream = New FileStream(args(0), FileMode.Open, FileAccess.Read)
                Using br As New BinaryReader(fs, New ASCIIEncoding())
                    Dim chunk(CHUNK_SIZE) As Byte
                    chunk = br.ReadBytes(CHUNK_SIZE)

                    While chunk.Length > 0
                        DumpBytes(chunk, chunk.Length)
                        chunk = br.ReadBytes(CHUNK_SIZE)
                    End While
                End Using
            End Using
        End If
    End Sub

    Public Sub DumpBytes(bdata() As Byte, len As Integer)
        Dim i As Integer
        Dim j As Integer = 0
        Dim dchar As Char
        ' 3 * 16 chars for hex display, 16 chars for text and 8 chars
        ' for the 'gutter' int the middle.
        Dim dumptext As New StringBuilder("        ", 16 * 4 + 8)
        For i = 0 To len - 1
            dumptext.Insert(j * 3, String.Format("{0:X2} ", CType(bdata(i), Integer)))
            dchar = Convert.ToChar(bdata(i))
            ' replace 'non-printable' chars with a '.'.
            If Char.IsWhiteSpace(dchar) Or Char.IsControl(dchar) Then
                dchar = "."
            End If
            dumptext.Append(dchar)
            j += 1
            If j = 16 Then
                Console.WriteLine(dumptext)
                dumptext.Length = 0
                dumptext.Append("        ")
                j = 0
            End If
        Next i
        ' display the remaining line
        If j > 0 Then
            ' add blank hex spots to align the 'gutter'.
            For i = j To 15
                dumptext.Insert(j * 3, "   ")
            Next i
            Console.WriteLine(dumptext)
        End If
    End Sub

End Module

注解

BinaryReader 读取操作失败后，不会还原文件位置。

有关常见 I/O 任务的列表，请参阅 常见 I/O 任务。

另请参阅

• 文件和流 I/O
• 如何：从文件中读取文本
• 如何：将文本写入文件