Bagikan melalui


SerialPort.BaudRate Properti

Definisi

Mendapatkan atau mengatur laju baud serial.

public:
 property int BaudRate { int get(); void set(int value); };
public int BaudRate { get; set; }
[System.ComponentModel.Browsable(true)]
public int BaudRate { get; set; }
member this.BaudRate : int with get, set
[<System.ComponentModel.Browsable(true)>]
member this.BaudRate : int with get, set
Public Property BaudRate As Integer

Nilai Properti

Tingkat baud.

Atribut

Pengecualian

Tingkat baud yang ditentukan kurang dari atau sama dengan nol, atau lebih besar dari laju baud maksimum yang diizinkan untuk perangkat.

Porta dalam keadaan tidak valid.

-atau-

Upaya untuk mengatur status port yang mendasar gagal. Misalnya, parameter yang diteruskan dari objek ini SerialPort tidak valid.

Contoh

Contoh berikut menunjukkan cara mengatur properti ke BaudRate9600.

SerialPort^ mySerialPort = gcnew SerialPort("COM1");

mySerialPort->BaudRate = 9600;
mySerialPort->Parity = Parity::None;
mySerialPort->StopBits = StopBits::One;
mySerialPort->DataBits = 8;
mySerialPort->Handshake = Handshake::None;
mySerialPort->RtsEnable = true;
SerialPort mySerialPort = new SerialPort("COM1");

mySerialPort.BaudRate = 9600;
mySerialPort.Parity = Parity.None;
mySerialPort.StopBits = StopBits.One;
mySerialPort.DataBits = 8;
mySerialPort.Handshake = Handshake.None;
mySerialPort.RtsEnable = true;
Dim mySerialPort As New SerialPort("COM1")

mySerialPort.BaudRate = 9600
mySerialPort.Parity = Parity.None
mySerialPort.StopBits = StopBits.One
mySerialPort.DataBits = 8
mySerialPort.Handshake = Handshake.None
mySerialPort.RtsEnable = True

Contoh berikut menunjukkan penggunaan SerialPort kelas untuk memungkinkan dua pengguna mengobrol dari dua komputer terpisah yang terhubung oleh kabel modem null. Dalam contoh ini, pengguna diminta untuk pengaturan port dan nama pengguna sebelum mengobrol. Contoh kode ini adalah bagian dari contoh kode yang lebih besar yang disediakan untuk SerialPort kelas .

public:
    static void Main()
    {
        String^ name;
        String^ message;
        StringComparer^ stringComparer = StringComparer::OrdinalIgnoreCase;
        Thread^ readThread = gcnew Thread(gcnew ThreadStart(PortChat::Read));

        // Create a new SerialPort object with default settings.
        _serialPort = gcnew SerialPort();

        // Allow the user to set the appropriate properties.
        _serialPort->PortName = SetPortName(_serialPort->PortName);
        _serialPort->BaudRate = SetPortBaudRate(_serialPort->BaudRate);
        _serialPort->Parity = SetPortParity(_serialPort->Parity);
        _serialPort->DataBits = SetPortDataBits(_serialPort->DataBits);
        _serialPort->StopBits = SetPortStopBits(_serialPort->StopBits);
        _serialPort->Handshake = SetPortHandshake(_serialPort->Handshake);

        // Set the read/write timeouts
        _serialPort->ReadTimeout = 500;
        _serialPort->WriteTimeout = 500;

        _serialPort->Open();
        _continue = true;
        readThread->Start();

        Console::Write("Name: ");
        name = Console::ReadLine();

        Console::WriteLine("Type QUIT to exit");

        while (_continue)
        {
            message = Console::ReadLine();

            if (stringComparer->Equals("quit", message))
            {
                _continue = false;
            }
            else
            {
                _serialPort->WriteLine(
                    String::Format("<{0}>: {1}", name, message) );
            }
        }

        readThread->Join();
        _serialPort->Close();
    }

    static void Read()
    {
        while (_continue)
        {
            try
            {
                String^ message = _serialPort->ReadLine();
                Console::WriteLine(message);
            }
            catch (TimeoutException ^) { }
        }
    }
public static void Main()
{
    string name;
    string message;
    StringComparer stringComparer = StringComparer.OrdinalIgnoreCase;
    Thread readThread = new Thread(Read);

    // Create a new SerialPort object with default settings.
    _serialPort = new SerialPort();

    // Allow the user to set the appropriate properties.
    _serialPort.PortName = SetPortName(_serialPort.PortName);
    _serialPort.BaudRate = SetPortBaudRate(_serialPort.BaudRate);
    _serialPort.Parity = SetPortParity(_serialPort.Parity);
    _serialPort.DataBits = SetPortDataBits(_serialPort.DataBits);
    _serialPort.StopBits = SetPortStopBits(_serialPort.StopBits);
    _serialPort.Handshake = SetPortHandshake(_serialPort.Handshake);

    // Set the read/write timeouts
    _serialPort.ReadTimeout = 500;
    _serialPort.WriteTimeout = 500;

    _serialPort.Open();
    _continue = true;
    readThread.Start();

    Console.Write("Name: ");
    name = Console.ReadLine();

    Console.WriteLine("Type QUIT to exit");

    while (_continue)
    {
        message = Console.ReadLine();

        if (stringComparer.Equals("quit", message))
        {
            _continue = false;
        }
        else
        {
            _serialPort.WriteLine(
                String.Format("<{0}>: {1}", name, message));
        }
    }

    readThread.Join();
    _serialPort.Close();
}

public static void Read()
{
    while (_continue)
    {
        try
        {
            string message = _serialPort.ReadLine();
            Console.WriteLine(message);
        }
        catch (TimeoutException) { }
    }
}
Public Shared Sub Main()
    Dim name As String
    Dim message As String
    Dim stringComparer__1 As StringComparer = StringComparer.OrdinalIgnoreCase
    Dim readThread As New Thread(AddressOf Read)

    ' Create a new SerialPort object with default settings.
    _serialPort = New SerialPort()

    ' Allow the user to set the appropriate properties.
    _serialPort.PortName = SetPortName(_serialPort.PortName)
    _serialPort.BaudRate = SetPortBaudRate(_serialPort.BaudRate)
    _serialPort.Parity = SetPortParity(_serialPort.Parity)
    _serialPort.DataBits = SetPortDataBits(_serialPort.DataBits)
    _serialPort.StopBits = SetPortStopBits(_serialPort.StopBits)
    _serialPort.Handshake = SetPortHandshake(_serialPort.Handshake)

    ' Set the read/write timeouts
    _serialPort.ReadTimeout = 500
    _serialPort.WriteTimeout = 500

    _serialPort.Open()
    _continue = True
    readThread.Start()

    Console.Write("Name: ")
    name = Console.ReadLine()

    Console.WriteLine("Type QUIT to exit")

    While _continue
        message = Console.ReadLine()

        If stringComparer__1.Equals("quit", message) Then
            _continue = False
        Else
            _serialPort.WriteLine([String].Format("<{0}>: {1}", name, message))
        End If
    End While

    readThread.Join()
    _serialPort.Close()
End Sub

Public Shared Sub Read()
    While _continue
        Try
            Dim message As String = _serialPort.ReadLine()
            Console.WriteLine(message)
        Catch generatedExceptionName As TimeoutException
        End Try
    End While
End Sub

Keterangan

Tingkat baud harus didukung oleh driver serial pengguna. Nilai defaultnya adalah 9600 bit per detik (bps).

Berlaku untuk