This article is the first in the series of deployment articles that describe how to deploy Azure Local. This article applies to both single and multi-node deployments. The target audience for this article is IT administrators who are responsible for deploying Azure Local in their organization.
About deployment methods
In this release, you can deploy Azure Local using one of the following methods:
Deploy from Azure portal: Select this option to deploy an Azure Local instance using Azure portal. You can choose from three deployment methods: New configuration, Template spec, and QuickStart template. The deployment flow guides you through the steps to deploy your Azure Local instance.
Deploy from an Azure Resource Manager template: Select this option to deploy an Azure Local instance using an Azure Resource Manager deployment template and the corresponding parameters file. A Resource Manager template is a JSON file containing customized template expressions where you can define dynamic values and logic that determine the Azure resources to deploy.
Identify the network reference pattern that corresponds to the way your machines are cabled. You will define the network settings based on this topology.
Use the Resource Manager deployment template and the parameter file to deploy an Azure Local instance.
注意
As part of Azure Local, an Arc resource bridge appliance VM is automatically deployed during setup. The resource bridge is what enables Azure Arc capabilities and hybrid connectivity to Azure.
Validated network topologies
When you deploy Azure Local from Azure portal, the network configuration options vary depending on the number of machines and the type of storage connectivity. Azure portal guides you through the supported options for each configuration.
Before starting the deployment, we recommend you check the following table that shows the supported and available options.
Supported network topologies
Network topology
Azure portal
Resource Manager template
One machine - no switch for storage
By default
Supported
One machine - with network switch for storage
Not applicable
Supported
Two machines - no switch for storage
Supported
Supported
Two machines - with network switch for storage
Supported
Supported
Three machines - with network switch for storage
Supported
Supported
Three machines - with no network switch for storage
Not supported
Supported
Four to 16 machines - with no network switch for storage
Not supported
Not supported
Four to 16 machines - with network switch for storage
Supported
Supported
The two storage network options are:
No switch for storage. When you select this option, your Azure Local system uses crossover network cables directly connected to your network interfaces for storage communication. The current supported switchless deployments from the portal are one or two machines.
Network switch for storage. When you select this option, your Azure Local system uses network switches connected to your network interfaces for storage communication. You can deploy up to 16 machines using this configuration.
You can then select the network reference pattern corresponding to a validated network topology that you intend to deploy.
SAP プロフェッショナルは、Azure での SAP ソリューションのデプロイを評価する必要があります。 このモジュールでは、Azure での単一インスタンスの SAP HANA デプロイの準備について説明します。 試験 AZ-120 Planning and Administering Microsoft Azure for SAP Workloads の準備を行います。