Kongsi melalui

Prepare Power Platform connector and AI enabled connector files for certification

  • Artikel

This process is for both verified and independent publishers.

After you finish developing your custom connector and/or AI enabled connector, follow these steps to prepare it for certification and generate the connector and/or AI enabled connector files to submit to Microsoft.

Note

This article provides information for certifying custom connectors in Azure Logic Apps, Power Automate, and Power Apps and AI enabled connector for Microsoft Copilot Studio. Before following the steps in this article, read Get your connector and/or plugin certified.

Step 1: Register your connector and/or AI enabled connector (Only applicable for independent publishers)

This section doesn't apply to verified publishers.

You don't need to finish development on your custom connector and/or AI enabled connector to apply for certification. To begin the certification process, register your connector and/or AI enabled connector for certification by filling out our registration form.

Expect an email within two business days from a Microsoft contact, who:

  • Understands your custom connector, connector, and/or AI enabled connector.
  • Learns about your development progress.
  • Emails you about the certification process.

Step 2: Meet submission requirements for connectors

To maintain a high standard of quality and consistency among our certified connectors, Microsoft has a set of requirements and guidelines that your custom connector must adhere to for certification.

Give your connector a title

The title must meet the following requirements.

  • Must exist and be written in English.
  • Must be unique and distinguishable from any existing connector and/or plugin title.
  • Should be the name of your product or organization.
  • Should follow existing naming patterns for certified connector and/or plugin. For independent publishers, the connector name should follow the pattern, Connector and/or plugin Name (Independent Publisher).
  • Can't be longer than 30 characters.
  • Can't contain the words API, Connector, or any of our Power Platform product names (for example, Power Apps).
  • Can't end in a nonalphanumeric character, including carriage return, new line, or blank space.

Examples

  • Good connector and/or plugin titles: Azure Sentinel*, *Office 365 Outlook
  • Poor connector and/or plugin titles: Azure Sentinel's Power Apps Connector, Office 365 Outlook API

Write a description for your connector

The description must meet the following requirements.

  • Must exist and be written in English.
  • Must be free of grammatical and spelling errors.
  • Should describe concisely the main purpose and value offered by your connector.
  • Can't be shorter than 30 characters or longer than 500 characters.
  • Can't contain any Power Platform product names (for example, 'Power Apps').

Design an icon for your connector (Only applicable for verified publishers)

This section doesn't apply to independent publishers.

  • Create a logo of with 1:1 dimensions within a range of 100 x 100 to 230 × 230 pixels (no rounded edges).
  • Use a non-transparent, nonwhite color (#ffffff) background, and not-default color (#007ee5) that matches your specified icon background color.
  • Ensure the icon is unique to any other certified connector icon.
  • Submit the logo in PNG format as <icon>.png.
  • Set logo dimensions below 70% for the image's height & width with a consistent background.
  • Ensure brand color is a valid hexadecimal color and shouldn't be white (#ffffff) or default (#007ee5).

Define operation and parameter summaries and descriptions

The summaries and descriptions must meet the following requirements.

  • Must exist and be written in English.
  • Must be free of grammatical and spelling errors.
  • Operation and parameter summaries should be phrases of 80 characters or shorter, and contain only alphanumeric characters or parentheses.
  • Operation and parameter descriptions should be full, descriptive sentences, and end in punctuation.
  • Can't contain any of the Microsoft Power Platform product names (for example, "Power Apps").

Define exact operation responses

The operation responses must meet the following requirements.

  • Define operation responses with an exact schema only with expected responses.
  • Don't use default responses with an exact schema definition.
  • Provide valid response schema definitions for all operations in the swagger.
  • Empty response schemas aren't allowed except in special cases where the response schema is dynamic. This means no dynamic content is shown in the output and makers must use JSON to parse the response.
  • Empty operations aren't allowed.
  • Remove empty properties unless they're required.

Verify swagger properties

The properties must meet the following requirements.

  • Ensure the "openapidefinition" is in a correctly formatted JSON file.
  • Ensure swagger definition complies with the OpenAPI 2.0 standard and the connectors’ extended standard.

Verify connection parameters

The parameters must meet the following requirements.

  • Ensure the property is updated with appropriate values for "UIDefinition" (display name, description).

  • If your connection parameter uses Basic authentication, ensure JSON is formatted correctly as the following example.

    {
  "username": {
    "type": "securestring",
    "uiDefinition": {
      "displayName": "YourUsernameLabel",
      "description": "The description of YourUsernameLabel for this api",
      "tooltip": "Provide the YourUsernameLabel tooltip text",
      "constraints": {
        "tabIndex": 2,
        "clearText": true,
        "required": "true"
        }
  }
},
  "password": {
    "type": "securestring",
    "uiDefinition": {
      "displayName": "YourPasswordLabel",
      "description": "The description of YourPasswordLabel for this api",
      "tooltip": "Provide the YourPasswordLabel tooltip text",
      "constraints": {
        "tabIndex": 3,
        "clearText": false,
        "required": "true"
      }
    }
  }
}

  • If your connection parameter has APIKey as authentication, ensure JSON is formatted correctly as the following example.

    {
  "api_key": {
    "type": "securestring",
    "uiDefinition": {
      "displayName": "YourApiKeyParameterLabel",
      "tooltip": "Provide your YourApiKeyParameterLabel tooltip text",
      "constraints": {
        "tabIndex": 2,
        "clearText": false,
        "required": "true"
      }
    }
  }
}

  • If your connection parameter has Generic OAuth as authentication, ensure JSON is formatted correctly as the following example.

    {
  "token": {
    "type": "oAuthSetting",
    "oAuthSettings": {
      "identityProvider": "oauth2",
      "scopes": [
        "scope1"
      ],
      "redirectMode": "GlobalPerConnector",
      "customParameters": {
        "AuthorizationUrl": {
          "value": "https://contoso.com"
        },
        "TokenUrl": {
          "value": "https://contoso.com"
        },
        "RefreshUrl": {
          "value": "https://contoso.com"
        }
      },
      "clientId": "YourClientID"
    },
    "uiDefinition": null
  }
}

  • If your connection parameter has OAuth2 identity provider, ensure the identity provider is from the list of supported OAuth2 providers. Following is the example of GitHub OAuth2 identity provider:

    {
  "token": {
    "type": "oAuthSetting",
    "oAuthSettings": {
      "identityProvider": "github",
      "scopes": [
        "scope1"
      ],
      "redirectMode": "GlobalPerConnector",
      "customParameters": {},
      "clientId": "YourClientId"
    },
    "uiDefinition": null
  }
}

  • If your connection parameter has Microsoft Entra ID as authentication, ensure JSON is formatted correctly as the following example.

    {
  "token": {
    "type": "oAuthSetting",
    "oAuthSettings": {
      "identityProvider": "aad",
      "scopes": [
        "scope1"
      ],
      "redirectMode": "GlobalPerConnector",
      "customParameters": {
        "LoginUri": {
          "value": "https://login.microsoftonline.com"
        },
        "TenantId": {
          "value": "common"
        },
        "ResourceUri": {
          "value": "resourceUri"
        },
        "EnableOnbehalfOfLogin": {
          "value": false
        }
      },
      "clientId": "AzureActiveDirectoryClientId"
    },
    "uiDefinition": null
  }
}

Create quality English language strings

Connectors are localized as part of Power Automate localization; therefore, when you develop a connector, the quality of the English language strings is key to the translation quality. Here are some major areas to focus on as you create the values of the strings you provide.

  • To ensure all string values are free of typographical errors, make sure to run a spell check program. If there's any incomplete English language string, the translation result is incomplete or incorrect in context.

  • Make sure the sentence is in complete form. If the sentence isn't complete, that can also generate lower quality translations.

  • Make sure the meaning of the sentence is clear. If the meaning of the sentence is ambiguous, that can also generate lower quality or incorrect translations.

  • Make sure summaries, x-ms-summaries, and descriptions are grammatically correct. Don't copy and paste them. To learn how they show within the product, go to Connector string guidance.

  • Avoid runtime composite strings, if possible. Use fully formed sentences instead. Concatenated strings or sentences make it difficult to translate, or can cause a wrong translation.

  • If you use abbreviations, make sure to capitalize them to make it clear. This reduces the chance of it being mistaken for a typographical error.

  • Strings in CaMel form (for example, minimizeHighways or MinimizeHighways) are typically considered nontranslatable. If you want to localize the string value, you should fix the CaMel form string.

Step 3: Run the Solution Checker to validate your connector

Solution Checker is a mechanism to conduct static analysis to ensure your connector is adhering to the standards required by Microsoft for certification. Add your connector to a solution in Power Automate or Power Apps and run the solution checker by following the instructions at Validate a custom connector with solution checker.

Watch this video to learn how to run the Solution Checker.

Step 4: Meet submission requirements for plugins

This section applies if you're also submitting the associated connector plugin for certification.

Step 5: Prepare the connector and/or plugin artifacts

Note

  • Ensure that you followed the specifications and ensured the quality of your connector and/or AI enabled connector before certification. Failure to do so will result in delays in certification because you'll be asked to make changes.
  • Provide a production version of the host URL. Staging, dev, and test host URLs aren't allowed.

You're submitting to Microsoft a set of files, which is a Solution generation from maker portal or Microsoft Copilot Studio. To package your files, follow the steps in this section.

Connector and plugin packaging guide

The procedures in this section guide you through various scenarios of packaging. If you want to package only a custom connector, use the first scenario. If you want to package both a custom connector and AI enabled connector, use the second scenario. If you want to package an existing connector and AI enabled connector, use the last scenario.

Package your custom connector and submit for certification

  1. Create a custom connector to a solution.

  2. Run solution checker on your connector solution in step 1.

  3. Export the connector solution.

  4. Create a flow (testing) using the newly created custom connector or, add an existing flow into the solution.

  5. Export the flow solution.

  6. Create a package with the solutions from steps 3 and 5.

  7. Create an intro.md file.

  8. Create the final package as a zip file, which is in the following format:

    Screenshot of the folders and files in a zip file for a certified connector to be certified.

Note

The names of the folder and files outside the solution are only for reference—you can choose as per your requirements. However, don't manipulate the files inside the solution.

  1. Upload the package to a storage blob and generate SAS URL. Ensure that your SAS URI is valid for at least 15 days.
  2. Submit your package to Partner Center.

Package your custom connector and AI enabled connector for certification

  1. Follow steps 1 through 5 in Package your custom connector and submit for certification in this article.

  2. Create a plugin in the Microsoft Copilot Studio portal and export it as a solution.

  3. Create a package from the following:

  4. Create an intro.md file.

  5. Create the final package as a zip file, which is in the following format.

    Screenshot of the folders and files in a zip file for a certified connector and plugin to be certified.

Note

The names of the folder and files outside the solution are only for reference—you can choose as per your requirements. However, don't manipulate the files inside the solution.

  1. Upload the package to a storage blob and generate SAS URL. Ensure that your SAS URI is valid for at least 15 days.
  2. Submit your package to Partner Center.

Package existing certified connector and AI enabled connector for certification

  1. Create a solution in Power Automate and add the already certified connector in it.

  2. Follow steps 2 through 4 in Package your custom connector and submit for certification in this article.

  3. Create a plugin in Copilot Studio and export it as a solution.

  4. Export the plugin as solution.

  5. Create a package from the following:

  6. Create an intro.md file.

  7. Create the final package as a zip file, which is in the following format.

    Screenshot of the folders and files in a zip file for an existing certified connector and plugin to be certified.

Note

The names of the folder and files outside the solution are only for reference—you can choose as per your requirements. However, don't manipulate the files inside the solution.

  1. Upload the package to a storage blob and generate SAS URL. Ensure that your SAS URI is valid for at least 15 days.
  2. Submit your package to Partner Center.

Both verified publishers and independent publishers download openapidefinition.json in their artifacts. You need to set the IconBrandColor in this file.

  • Verified publishers: Set iconBrandColor to your brand color in the openapidefinition file.
  • Independent publishers: Set iconBrandColor to "#da3b01" in the openapidefinition file.
    Screenshot of a vivid orange (da3b01) icon.

Create an intro.md artifact

An intro.md file is necessary for both independent publishers and verified publishers. You need to create an intro.md file to document your connector's features and functionality. For an example of documentation to include, go to the Readme.md example. To learn about writing an intro.md file, look at other intro.md files (also known as Readme.md files) in our GitHub repository.

If you’re an independent publisher and your connector uses OAuth, make sure you include instructions for how to obtain credentials.

Tip

Known Issues and Limitations is a great section to maintain to keep your users up-to-date.

Step 6: Validate the package for structure

The package validation script validates the package structure and helps you generate the package in acceptable format for certification. Download the package validator script with this link: ConnectorPackageValidator.ps1.

To run the script, follow these steps:

  1. Open Windows PowerShell in Admin mode.

    Screenshot of Windows PowerShell in Admin mode.

  2. Change the drive location by entering cd /.

    The following example uses C:\.

    Screenshot of syntax to change the drive.

  3. Go to the path where you downloaded the package validator script.

    For example, if the path is C:\Users\user01\Downloads, you enter cd .\Users\user01\Downloads\.

    Screenshot of syntax to change the path.

  4. Set the execution policy to unrestricted by entering the following command:

    Set-ExecutionPolicy -ExecutionPolicy Unrestricted

    Screenshot of syntax to set the execution policy.

    This command enables the PowerShell to be executed without any restriction.

  5. Confirm your entry by entering Y, which stands for Yes.

  6. Execute the ConnectorPackageValidator.ps1 with the following steps:

    1. Enter the zip file path that contains the connector package.
    2. Specify whether or not the AI plugin is enabled.

    As shown in the following example, the first argument is a valid zip file path that contains the package. The second argument is yes/y to indicate the AI plugin is enabled, or no/n to indicate that it's disabled.

    Screenshot of syntax to execute ConnectorPackageValidator.ps1.

    If the package structure is correct, the following success message displays:

    Screenshot of the success message.

    If there's an issue with the package structure, the script provides issue details by detecting and highlighting the defects in the package structure.

    Screenshot of issue details.

Step 7: Submit your connector and/or plugin for certification

During the submission process, you open-source your connector and/or plugin to our Microsoft Power Platform Connectors repository.

  1. (For independent publishers) To submit the package to Microsoft for certification, follow the instructions in Independent Publisher Certification process.

  2. (For verified publishers) To submit the package to Microsoft for certification into Partner Center, follow the instructions in Verified Publisher Certification Process.

    If you're a verified publisher, you need to submit a script.csx file if you're using custom code.

    If your connector has OAuth, provide Client ID and Secret in Partner Center. Also, get the APIname from your connector submission request to update your app.

    As part of submission, Microsoft certifies and/or plugin your connector. If you need to troubleshoot swagger errors, go to Fix Swagger Validator errors.

Checklist before submitting

Before moving on to Submit your connector for Microsoft certification, ensure that:

For queries regarding certification

You need to have Microsoft Teams to join the Office Hours meeting. If you need access, view your options in Microsoft Teams.

Join Office Hours Meeting every Tuesday at the following times:

  • Indian Standard Time: 8 PM to 9 PM
  • Pacific Time: 7:30 AM to 8:30 AM

Tip

  • Create YouTube videos, blogs, or other content to share samples or screenshots for how to get started with the connector and/or plugin.
  • Include the links in the intro.md file so that we can add to our docs.
  • Add tooltips to your swagger file to help your users be more successful.

Next step