GraphicsPathIterator.NextPathType(Byte, Int32, Int32) Metoda
Definicja
Ważne
Niektóre informacje odnoszą się do produktu w wersji wstępnej, który może zostać znacząco zmodyfikowany przed wydaniem. Firma Microsoft nie udziela żadnych gwarancji, jawnych lub domniemanych, w odniesieniu do informacji podanych w tym miejscu.
Pobiera indeks początkowy i końcowy indeks następnej grupy punktów danych, które mają ten sam typ.
public:
int NextPathType([Runtime::InteropServices::Out] System::Byte % pathType, [Runtime::InteropServices::Out] int % startIndex, [Runtime::InteropServices::Out] int % endIndex);public int NextPathType (out byte pathType, out int startIndex, out int endIndex);member this.NextPathType : byte * int * int -> intPublic Function NextPathType (ByRef pathType As Byte, ByRef startIndex As Integer, ByRef endIndex As Integer) As IntegerParametry
- pathType
- Byte
[out] Odbiera typ punktu współużytkowany przez wszystkie punkty w grupie. Możliwe typy można pobrać z wyliczenia PathPointType.
- startIndex
- Int32
[out] Odbiera indeks początkowy grupy punktów.
- endIndex
- Int32
[out] Odbiera końcowy indeks grupy punktów.
Zwraca
Ta metoda zwraca liczbę punktów danych w grupie. Jeśli w ścieżce nie ma więcej grup, ta metoda zwraca wartość 0.
Przykłady
Poniższy przykład został zaprojektowany do użycia z formularzami systemu Windows i wymaga PaintEventArgseobiektu zdarzenia OnPaint. Kod wykonuje następujące akcje:
Tworzy obiekt GraphicsPath.
Dodaje trzy linie, prostokąt i wielokropek.
Wyświetla listę wartości wszystkich punktów po lewej stronie ekranu.
Tworzy GraphicsPathIterator i przewija go.
W pętli
foriteruje punkty przy użyciu metod NextPathType i NextPathType.Używa wartości zwracanych z iteracyjnych wywołań, aby wyświetlić liczbę podścieżki, liczbę punktów w niej oraz typ ścieżki wskazuje prawą stronę ekranu.
Wyświetla wartość całkowitej liczby punktów na ekranie.
Należy pamiętać, że ListPathPoints jest funkcją pomocnika, która oddziela większość (nie wszystkie) kodu wyświetlania od kodu ścieżki grafiki.
public:
void NextPathTypeExample( PaintEventArgs^ e )
{
// Create the GraphicsPath.
GraphicsPath^ myPath = gcnew GraphicsPath;
array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
Rectangle myRect = Rectangle(120,120,100,100);
// Add 3 lines, a rectangle, and an ellipse.
myPath->AddLines( myPoints );
myPath->AddRectangle( myRect );
myPath->AddEllipse( 220, 220, 100, 100 );
// List all of the path points to the screen.
ListPathPoints( e, myPath, nullptr, 20, 1 );
// Create a GraphicsPathIterator.
GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );
// Rewind the Iterator.
myPathIterator->Rewind();
// Iterate the subpaths and types, and list the results to
// the screen.
int i;
int j = 20;
int mySubPaths;
int subPathStartIndex;
int subPathEndIndex;
Boolean IsClosed;
Byte subPathPointType;
int pointTypeStartIndex;
int pointTypeEndIndex;
int numPointsFound;
System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
j = 20;
for ( i = 0; i < 3; i++ )
{
mySubPaths = myPathIterator->NextSubpath( subPathStartIndex, subPathEndIndex, IsClosed );
numPointsFound = myPathIterator->NextPathType( subPathPointType, pointTypeStartIndex, pointTypeEndIndex );
e->Graphics->DrawString( String::Format( "SubPath: {0} Points Found: {1} Type of Points: {2}", i,
numPointsFound, subPathPointType ), myFont, myBrush, 200.0f, (float)j );
j += 20;
}
// List the total number of path points to the screen.
ListPathPoints( e, myPath, myPathIterator, 200, 2 );
}
//-------------------------------------------------------
//This function is a helper function used by
// NextPathTypeExample.
//-------------------------------------------------------
void ListPathPoints( PaintEventArgs^ e, GraphicsPath^ myPath, GraphicsPathIterator^ myPathIterator, int xOffset, int listType )
{
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath->PointCount;
array<PointF>^myPathPoints = myPath->PathPoints;
array<Byte>^myPathTypes = myPath->PathTypes;
// Set up variables for drawing the points to the screen.
int i;
float j = 20;
System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
if ( listType == 1 )
{
// Draw the set of path points and types to the screen.
for ( i = 0; i < myPathPointCount; i++ )
{
e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ],
myFont, myBrush, (float)xOffset, (float)j );
j += 20;
}
}
else
if ( listType == 2 )
{
// Draw the total number of points to the screen.
int myPathTotalPoints = myPathIterator->Count;
e->Graphics->DrawString( String::Format( "Total Points = {0}", myPathTotalPoints ), myFont, myBrush, (float)xOffset, 100.0f );
}
else
{
e->Graphics->DrawString( "Wrong or no list type argument.", myFont, myBrush, (float)xOffset, 200.0f );
}
}
public void NextPathTypeExample(PaintEventArgs e)
{
// Create the GraphicsPath.
GraphicsPath myPath = new GraphicsPath();
Point[] myPoints = {new Point(20, 20), new Point(120, 120),
new Point(20, 120),new Point(20, 20) };
Rectangle myRect = new Rectangle(120, 120, 100, 100);
// Add 3 lines, a rectangle, and an ellipse.
myPath.AddLines(myPoints);
myPath.AddRectangle(myRect);
myPath.AddEllipse(220, 220, 100, 100);
// List all of the path points to the screen.
ListPathPoints(e, myPath, null, 20, 1);
// Create a GraphicsPathIterator.
GraphicsPathIterator myPathIterator = new
GraphicsPathIterator(myPath);
// Rewind the Iterator.
myPathIterator.Rewind();
// Iterate the subpaths and types, and list the results to
// the screen.
int i, j = 20;
int mySubPaths, subPathStartIndex, subPathEndIndex;
Boolean IsClosed;
byte subPathPointType;
int pointTypeStartIndex, pointTypeEndIndex, numPointsFound;
Font myFont = new Font("Arial", 8);
SolidBrush myBrush = new SolidBrush(Color.Black);
j = 20;
for(i = 0;i < 3; i++)
{
mySubPaths = myPathIterator.NextSubpath(
out subPathStartIndex,
out subPathEndIndex,
out IsClosed);
numPointsFound = myPathIterator.NextPathType(
out subPathPointType,
out pointTypeStartIndex,
out pointTypeEndIndex);
e.Graphics.DrawString(
"SubPath: " + i +
" Points Found: " + numPointsFound.ToString() +
" Type of Points: " + subPathPointType.ToString(),
myFont,
myBrush,
200,
j);
j+=20;
}
// List the total number of path points to the screen.
ListPathPoints(e, myPath, myPathIterator, 200, 2);
}
//-------------------------------------------------------
//This function is a helper function used by
// NextPathTypeExample.
//-------------------------------------------------------
public void ListPathPoints(
PaintEventArgs e,
GraphicsPath myPath,
GraphicsPathIterator myPathIterator,
int xOffset,
int listType)
{
// Get the total number of points for the path,
// and the arrays of the points and types.
int myPathPointCount = myPath.PointCount;
PointF[] myPathPoints = myPath.PathPoints;
byte[] myPathTypes = myPath.PathTypes;
// Set up variables for drawing the points to the screen.
int i;
float j = 20;
Font myFont = new Font("Arial", 8);
SolidBrush myBrush = new SolidBrush(Color.Black);
if (listType == 1)
// List all the path points to the screen.
{
// Draw the set of path points and types to the screen.
for(i=0; i<myPathPointCount; i++)
{
e.Graphics.DrawString(myPathPoints[i].X.ToString()+
", " + myPathPoints[i].Y.ToString() + ", " +
myPathTypes[i].ToString(),
myFont,
myBrush,
xOffset,
j);
j+=20;
}
}
else if (listType == 2)
// Display the total number of path points.
{
// Draw the total number of points to the screen.
int myPathTotalPoints = myPathIterator.Count;
e.Graphics.DrawString("Total Points = " +
myPathTotalPoints.ToString(),
myFont,
myBrush,
xOffset,
100);
}
else
{
e.Graphics.DrawString("Wrong or no list type argument.",
myFont, myBrush, xOffset, 200);
}
}
Public Sub NextPathTypeExample(ByVal e As PaintEventArgs)
' Create the GraphicsPath.
Dim myPath As New GraphicsPath
Dim myPoints As Point() = {New Point(20, 20), _
New Point(120, 120), New Point(20, 120), New Point(20, 20)}
Dim myRect As New Rectangle(120, 120, 100, 100)
' Add 3 lines, a rectangle, and an ellipse.
myPath.AddLines(myPoints)
myPath.AddRectangle(myRect)
myPath.AddEllipse(220, 220, 100, 100)
' List all of the path points to the screen.
ListPathPointsHelper(e, myPath, Nothing, 20, 1)
' Create a GraphicsPathIterator.
Dim myPathIterator As New GraphicsPathIterator(myPath)
' Rewind the Iterator.
myPathIterator.Rewind()
' Iterate the subpaths and types, and list the results
' to the screen.
Dim j As Integer = 20
Dim i As Integer
Dim mySubPaths, subPathStartIndex, subPathEndIndex As Integer
Dim IsClosed As [Boolean]
Dim subPathPointType As Byte
Dim pointTypeStartIndex, pointTypeEndIndex, _
numPointsFound As Integer
Dim myFont As New Font("Arial", 8)
Dim myBrush As New SolidBrush(Color.Black)
j = 20
For i = 0 To 2
mySubPaths = myPathIterator.NextSubpath(subPathStartIndex, _
subPathEndIndex, IsClosed)
numPointsFound = myPathIterator.NextPathType(subPathPointType, _
pointTypeStartIndex, pointTypeEndIndex)
e.Graphics.DrawString("SubPath: " & i & " Points Found: " & _
numPointsFound.ToString() & " Type of Points: " & _
subPathPointType.ToString(), myFont, myBrush, 200, j)
j += 20
Next i
' List the total number of path points to the screen.
ListPathPointsHelper(e, myPath, myPathIterator, 200, 2)
End Sub
' This is a helper function used by NextPathTypeExample.
Public Sub ListPathPointsHelper(ByVal e As PaintEventArgs, _
ByVal myPath As GraphicsPath, ByVal myPathIterator As GraphicsPathIterator, _
ByVal xOffset As Integer, ByVal listType As Integer)
' Get the total number of points for the path,
' and the arrays of the points and types.
Dim myPathPointCount As Integer = myPath.PointCount
Dim myPathPoints As PointF() = myPath.PathPoints
Dim myPathTypes As Byte() = myPath.PathTypes
' Set up variables for drawing the points to the screen.
Dim i As Integer
Dim j As Single = 20
Dim myFont As New Font("Arial", 8)
Dim myBrush As New SolidBrush(Color.Black)
If listType = 1 Then
' List all the path points to the screen.
' Draw the set of path points and types to the screen.
For i = 0 To myPathPointCount - 1
e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
myPathPoints(i).Y.ToString() + ", " + _
myPathTypes(i).ToString(), myFont, myBrush, xOffset, j)
j += 20
Next i
Else
If listType = 2 Then
' Display the total number of path points.
' Draw the total number of points to the screen.
Dim myPathTotalPoints As Integer = myPathIterator.Count
e.Graphics.DrawString("Total Points = " + _
myPathTotalPoints.ToString(), myFont, myBrush, xOffset, _
100)
Else
e.Graphics.DrawString("Wrong or no list type argument.", _
myFont, myBrush, xOffset, 200)
End If
End If
End Sub
Dotyczy
Współpracuj z nami w serwisie GitHub
Źródło tej zawartości można znaleźć w witrynie GitHub, gdzie można również tworzyć i przeglądać problemy i żądania ściągnięcia. Więcej informacji znajdziesz w naszym przewodniku dla współtwórców.
