Azure Site Recovery
An Azure native disaster recovery service. Previously known as Microsoft Azure Hyper-V Recovery Manager.
717 questions
0 answers
ASR Failover replicated VM stuck in target region
Hi team, My primary region is eastus and secondry is westus. I was doing test failover and then i reverted it back to East ( source ) region. Whole infrastructure is running fine. Although I'm facing an issue regarding the replicated VM. This VM is…
asked 2024-10-29T09:26:17.2433333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(48, 3%, 14%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EHM%3C/text%3E%3C/svg%3E)
HIMANSHU MITTAL
0
Reputation points
commented 2024-10-31T16:02:19.03+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
0 answers
How to assign Static Private IP address to Network interface of replicated item under Azure Recovery service vault using PowerShell
Using below script to assign Virtual network and static IP to replicated item under Recovery service vault. Script successfully assigns virtual network and static IP to the replicated item as per Job status. But static IP is not reflecting on Azure…
asked 2024-10-29T08:52:04.4633333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(70.4, 6%, 16%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EVP%3C/text%3E%3C/svg%3E)
Vinmay Parkhi
0
Reputation points
commented 2024-10-31T04:10:50.49+00:00
Vinmay Parkhi
0
Reputation points
0 answers
Hyper-V VMs failing to replicatio to Azure Site Recovery
Hi folks, I have a Hyper-V host that has been replicating it's two VMs to Azure Site Recovery successfully for the last year. However it has started failing with the following error logged in event viewer for both VMs: Source: Hyper-V-VMMS Event ID:…
asked 2024-10-31T03:31:28.8766667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(80, 73%, 17%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EDW%3C/text%3E%3C/svg%3E)
Dylan Walkden
0
Reputation points
edited the question 2024-10-31T03:39:34.6333333+00:00
Dylan Walkden
0
Reputation points
0 answers
azure site recovery
cannot get site recovery working, certificate is updated on vmm, software and agents on hosts updated - this is from hyper v on prem to azure - the event id 30 is logged on the vmhosts with error message Service returned an error. Error Code '8079ffff'
asked 2024-10-29T01:43:16.6233333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(64, 34%, 16%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EPC%3C/text%3E%3C/svg%3E)
Peter C
0
Reputation points
commented 2024-10-29T08:05:12.1+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
Azure Site Recovery Certificate renewal Fails
Hi, We are have an issue trying to renew an Azure Site recovery certificate that has expired. I have followed the suggested steps on Microsoft …
asked 2021-07-27T07:45:25.6+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(214.4, 28.000000000000004%, 30%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EM%3C/text%3E%3C/svg%3E)
MujiburAdmin
1
Reputation point
commented 2024-10-25T14:55:32.6866667+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
One of the answers was accepted by the question author.
Disaster Recovery of Azure resources from one region to another region
Hi team, I am doing disaster recovery activity for azure resources. I have few resources like cosmosdb, storage account in one resource group in East US region.it is locally redundant. Incase if due to some disaster if my resources affected or deleted in…
asked 2024-10-17T10:36:13.9633333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(57.599999999999994, 14.000000000000002%, 15%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EMK%3C/text%3E%3C/svg%3E)
Mahammad Kanekallu (Contractor)
20
Reputation points
accepted 2024-10-25T10:21:23.0233333+00:00
Mahammad Kanekallu (Contractor)
20
Reputation points
1 answer
Replication appliance for azure migrate setup
Hi all, I have one azure migrate project in which I have two appliances one for discovery of hyper v VM and the other is for discovery of physical servers . I also already have a ASR azure site recovery vault and have two hyper v hosts registered to it.…
asked 2024-10-20T21:15:12.78+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(300.8, 44%, 39%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EHB%3C/text%3E%3C/svg%3E)
Hadi Burhan
80
Reputation points
commented 2024-10-24T02:16:12.22+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(268.8, 47%, 36%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3ERP%3C/text%3E%3C/svg%3E)
Rahul Podila
110
Reputation points Microsoft Vendor
1 answer
Mobility Agent fails to register with Proxy Server
I am following Microsoft instructions on how to migrate workloads from Gov to Public cloud, located at: https://learn.microsoft.com/en-us/azure/site-recovery/region-move-cross-geos I have the RSV deployed in the destination, an ASR appliance deployed…
asked 2024-10-14T18:14:35.32+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(80, 97%, 17%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EHT%3C/text%3E%3C/svg%3E)
Harrison, Tyler
0
Reputation points
answered 2024-10-23T18:59:21.07+00:00
Harrison, Tyler
0
Reputation points
1 answer
One of the answers was accepted by the question author.
I was trying to protect Physical Server to Azure and wasn't able to enable replication from the portal..
I am trying to protect physical server to Azure though it has failed to enable replication. I am getting Error ID: 539 and Error ID: 322001. I have tried uninstalling and reinstalling the mobility service and all other troubleshooting but I have failed…
asked 2023-09-04T09:46:39.48+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(227.2, 85%, 32%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EDP%3C/text%3E%3C/svg%3E)
Diana Piloya
125
Reputation points
accepted 2024-10-21T08:49:30.5733333+00:00
Diana Piloya
125
Reputation points
1 answer
One of the answers was accepted by the question author.
ASR Deployment Planner - Hyper-v
when i run the command .\ASRDeploymentPlanner.exe -Operation StartProfiling with VMlist Example: VMList.txt contains the following VMs: Host_1\VM_A 10.8.59.27\VM_B Host_2\VM_C I have this error: 10/10/2024 17:57:11:Performing prerequisite…
asked 2024-10-10T15:59:55.2233333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(262.40000000000003, 54%, 35%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3END%3C/text%3E%3C/svg%3E)
Nicola D'Effremo
20
Reputation points
commented 2024-10-17T08:37:40.7666667+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
stuggling to setup site recovery
HI there, hopefully a simple one, I am trying to setup site recovery for a given resource group. I am a global admin on our tenant. however, I am unable to find a certain resource group from the drop down menu - this is for any exising recovery services…
asked 2024-10-10T15:08:59.7233333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(51.2, 35%, 14%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EP%3C/text%3E%3C/svg%3E)
peteg_adm
1
Reputation point
answered 2024-10-10T21:38:04.2733333+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
SiteRecovery-Windows Extension - Provision Failed
Hi Team , We are replicating the Azure VM in recovery Service vault , We can see health is critical . Up on Analysis, We found that vm agent SiteRecovery-Windows is in status Provision failed which is causing the issue . We tried to uninstall and…
asked 2024-10-10T12:15:26.9033333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(230.39999999999998, 76%, 32%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3ERV%3C/text%3E%3C/svg%3E)
Ranjith Velamala
20
Reputation points
answered 2024-10-10T14:58:26.7166667+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
Azure Site Recovery Appliance: Failed to get SSL Server cert and fingerprint
We are using Azure Modernized Site Recovery. Our replicated servers are showing no mobility service heartbeat in the Azure portal. When checking logs from a replicated server, we see the following error: -5412 11876 341 Failed to get SSL Server cert and…
asked 2024-09-30T19:31:55.8266667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(121.6, 47%, 21%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EBH%3C/text%3E%3C/svg%3E)
Brock Harris
0
Reputation points
answered 2024-10-08T16:43:41.7433333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(256, 20%, 34%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EPR%3C/text%3E%3C/svg%3E)
Pranay Reddy Madireddy
365
Reputation points Microsoft Vendor
2 answers
One of the answers was accepted by the question author.
Azure Site Recovery Deployment Planner
I am trying to run Azure Site Recovery Deployment Planner to profile data to plan costing. But we are getting errors in the logs. 10/02/2024 14:10:07:Connected to host SERVER at 2/10/2024 2:10:07 PM 10/02/2024 14:10:10:Unable to Query host SERVER at…
asked 2024-10-02T05:03:02.0666667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(278.4, 86%, 36%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EMM%3C/text%3E%3C/svg%3E)
Matthew McKinnon
20
Reputation points
accepted 2024-10-03T22:26:10.0666667+00:00
Matthew McKinnon
20
Reputation points
1 answer
One of the answers was accepted by the question author.
When configuring ASR using private endpoints for the source and target vnets I am seeing 9 IP addresses being used in each subnet where replicated resources are located by the RSV private endpoint, is this correct?
I have configured ASR to replicated VMs in a source region to a target region and want to use private endpoints for the RSV. After enabling replication I see the following FQDNs and each one uses an IP in the source and target subnets, adding up to 9…
asked 2024-09-24T11:46:23.7466667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(92.8, 82%, 18%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EPD%3C/text%3E%3C/svg%3E)
Paul Downes
20
Reputation points
edited the question 2024-10-01T10:20:12.8066667+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
0 answers
Hyper-V failed to enable replication for virtual machine 'xxxxxxxxxx': Unspecified error (0x80004005). (Virtual machine ID- xxxxxxxxxxxxx)
I am configuring Hyper-V for Azure site recovery, i have added the HyperV to HyperV site and when i try to replicate the servers i am getting these below error in azure: Error ID 70094 Error Message Protection couldn't be enabled for the virtual…
asked 2024-09-16T21:04:10.6366667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(188.79999999999998, 57.99999999999999%, 28%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EVG%3C/text%3E%3C/svg%3E)
Vinuth gowda R
5
Reputation points
commented 2024-09-30T16:34:09.94+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
Test failover not working for VM's running with containers
Test failover not working for VM's running with containers and having the mount points with overlay filesystem. Does Azure site recovery will not work for container VM's ? Error Message Failover for the virtual machine failed. Possible causes Failed…
asked 2024-09-26T09:58:59.87+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(208, 83%, 30%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3ERR%3C/text%3E%3C/svg%3E)
Ravikiran Reddybathina
0
Reputation points
answered 2024-09-27T23:39:54.3166667+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee
1 answer
azure site recovery issue
I have an issue related to hyper-v to Azure. I want to replicate the 1 VM, but he told me that:
asked 2024-09-26T11:34:03.7766667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(182.40000000000003, 36%, 27%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EJM%3C/text%3E%3C/svg%3E)
jihad majed
400
Reputation points
edited an answer 2024-09-26T19:21:45.4433333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(176, 24%, 27%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EA%3C/text%3E%3C/svg%3E)
alta94
2,181
Reputation points
1 answer
ASR can not be registered due to an internal error
Hello all , I am trying to register a HV server to ASR and i am getting error message in title .Installation finish successfully and error appears in registration phase. Below some info about setup Host is 2019 and member of cluster without VMM no…
asked 2024-09-23T09:51:56.2433333+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(224.00000000000003, 52%, 31%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3ENS%3C/text%3E%3C/svg%3E)
Nikos Sotiriadis
40
Reputation points
answered 2024-09-26T13:28:25.8933333+00:00
Nikos Sotiriadis
40
Reputation points
1 answer
Receiving error at end of web setup
I am attempting to install the ASR appliance. When I tried with no private endpoints It installs. When I attempt with private endpoints configured on vault it fails. with the following error Details Discovery refresh site operation could not be initiated…
asked 2024-02-07T18:14:18.2966667+00:00
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(195.2, 2%, 28%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EA0%3C/text%3E%3C/svg%3E)
azure-000
1
Reputation point
commented 2024-09-25T14:48:52.66+00:00
SadiqhAhmed-MSFT
46,036
Reputation points Microsoft Employee