Virtual network service tags
A service tag represents a group of IP address prefixes from a given Azure service. Microsoft manages the address prefixes encompassed by the service tag and automatically updates the service tag as addresses change, minimizing the complexity of frequent updates to network security rules.
Important
While Service Tags simplify the ability to enable IP-based Access Control Lists (ACLs), Service Tags alone aren't sufficient to secure traffic without considering the nature of the service and the traffic it sends. For more information about IP based ACLs, see What is an IP based access control list (ACL)?.
Additional information about the nature of the traffic can be found later in this article for each service and their tag. It's important to ensure you are familiar with the traffic that you allow when utilizing service tags for IP based ACLs. Consider added levels of security to protect your environment.
You can use service tags to define network access controls on network security groups, Azure Firewall, and user-defined routes. Use service tags in place of specific IP addresses when you create security rules and routes. By specifying the service tag name, such as ApiManagement, in the appropriate source or destination field of a security rule, you can allow or deny the traffic for the corresponding service. By specifying the service tag name in the address prefix of a route, you can route traffic intended for any of the prefixes encapsulated by the service tag to a desired next hop type.
You can use service tags to achieve network isolation and protect your Azure resources from the general Internet while accessing Azure services that have public endpoints. Create inbound/outbound network security group rules to deny traffic to/from Internet and allow traffic to/from AzureCloud or other available service tags of specific Azure services.
Available service tags
The following table includes all the service tags available for use in network security group rules.
The columns indicate whether the tag:
- Is suitable for rules that cover inbound or outbound traffic.
- Supports regional scope.
- Is usable in Azure Firewall rules as a destination rule only for inbound or outbound traffic.
By default, service tags reflect the ranges for the entire cloud. Some service tags also allow more granular control by restricting the corresponding IP ranges to a specified region. For example, the service tag Storage represents Azure Storage for the entire cloud, but Storage.WestUS narrows the range to only the storage IP address ranges from the WestUS region. The following table indicates whether each service tag supports such regional scope, and the direction listed for each tag is a recommendation. For example, the AzureCloud tag may be used to allow inbound traffic. In most scenarios, we don't recommend allowing traffic from all Azure IPs since IPs used by other Azure customers are included as part of the service tag.
| Tag | Purpose | Can use inbound or outbound? | Can be regional? | Can use with Azure Firewall? |
|---|---|---|---|---|
| ActionGroup | Action Group. | Inbound | No | Yes |
| ApiManagement | Management traffic for Azure API Management-dedicated deployments. Note: This tag represents the Azure API Management service endpoint for control plane per region. The tag enables customers to perform management operations on the APIs, Operations, Policies, NamedValues configured on the API Management service. |
Inbound | Yes | Yes |
| ApplicationInsightsAvailability | Application Insights Availability. | Inbound | No | Yes |
| AppConfiguration | App Configuration. | Outbound | No | Yes |
| AppService | Azure App Service. This tag is recommended for outbound security rules to web apps and function apps. Note: This tag doesn't include IP addresses assigned when using IP-based SSL (App-assigned address). |
Outbound | Yes | Yes |
| AppServiceManagement | Management traffic for deployments dedicated to App Service Environment. | Both | No | Yes |
| AzureActiveDirectory | Microsoft Entra ID. | Outbound | No | Yes |
| AzureActiveDirectoryDomainServices | Management traffic for deployments dedicated to Microsoft Entra Domain Services. | Both | No | Yes |
| AzureAdvancedThreatProtection | Microsoft Defender for Identity. | Outbound | No | Yes |
| AzureArcInfrastructure | Azure Arc-enabled servers, Azure Arc-enabled Kubernetes, and Guest Configuration traffic. Note: This tag has a dependency on the AzureActiveDirectory,AzureTrafficManager, and AzureResourceManager tags. |
Outbound | No | Yes |
| AzureAttestation | Azure Attestation. | Outbound | No | Yes |
| AzureBackup | Azure Backup. Note: This tag has a dependency on the Storage and AzureActiveDirectory tags. |
Outbound | No | Yes |
| AzureBotService | Azure Bot Service. | Both | No | Yes |
| AzureCloud | All datacenter public IP addresses. This tag doesn't include IPv6. | Both | Yes | Yes |
| AzureCognitiveSearch | Azure AI Search. This tag specifies the IP ranges of the multitenant execution environments used by a search service for indexer-based indexing. Note: The IP of the search service itself isn't covered by this service tag. In the firewall configuration of your Azure resource, you should specify the service tag and also the specific IP address of the search service itself. |
Inbound | No | Yes |
| AzureConnectors | This tag represents the IP addresses used for managed connectors that make inbound webhook callbacks to the Azure Logic Apps service and outbound calls to their respective services, for example, Azure Storage or Azure Event Hubs. | Both | Yes | Yes |
| AzureContainerAppsService | Azure Container Apps Service | Both | Yes | No |
| AzureContainerRegistry | Azure Container Registry. | Outbound | Yes | Yes |
| AzureCosmosDB | Azure Cosmos DB. | Outbound | Yes | Yes |
| AzureDatabricks | Azure Databricks. | Both | No | Yes |
| AzureDataExplorerManagement | Azure Data Explorer Management. | Inbound | No | Yes |
| AzureDeviceUpdate | Device Update for IoT Hub. | Both | No | Yes |
| AzureDevOps | Azure DevOps. | Inbound | Yes | Yes |
| AzureDigitalTwins | Azure Digital Twins. Note: This tag or the IP addresses covered by this tag can be used to restrict access to endpoints configured for event routes. |
Inbound | No | Yes |
| AzureEventGrid | Azure Event Grid. | Both | No | Yes |
| AzureFrontDoor.Frontend AzureFrontDoor.Backend AzureFrontDoor.FirstParty |
Frontend service tag contains the IP addresses that clients use to reach Front Door. You can apply the AzureFrontDoor.Frontend service tag when you want to control the outbound traffic that can connect to services behind Azure Front Door. Backend service tag contains the IP addresses that Azure Front Door uses to access your origins. You can apply this service tag when you configure security for your origins. FirstParty is a special tag reserved for a select group of Microsoft services hosted on Azure Front Door. | Both | Yes | Yes |
| AzureHealthcareAPIs | The IP addresses covered by this tag can be used to restrict access to Azure Health Data Services. | Both | No | Yes |
| AzureInformationProtection | Azure Information Protection. Note: This tag has a dependency on the AzureActiveDirectory, AzureFrontDoor.Frontend and AzureFrontDoor.FirstParty tags. |
Outbound | No | Yes |
| AzureIoTHub | Azure IoT Hub. | Outbound | Yes | Yes |
| AzureKeyVault | Azure Key Vault. Note: This tag has a dependency on the AzureActiveDirectory tag. |
Outbound | Yes | Yes |
| AzureLoadBalancer | The Azure infrastructure load balancer. The tag translates to the virtual IP address of the host (168.63.129.16) where the Azure health probes originate. This only includes probe traffic, not real traffic to your backend resource. If you're not using Azure Load Balancer, you can override this rule. | Both | No | No |
| AzureMachineLearningInference | This service tag is used for restricting public network ingress in private network managed inferencing scenarios. | Inbound | No | Yes |
| AzureManagedGrafana | Azure Managed Grafana instance endpoint. | Outbound | No | Yes |
| AzureMonitor | Log Analytics, Application Insights, Azure Monitor Workspace, AzMon, and custom metrics (GiG endpoints). Note: For Log Analytics, the Storage tag is also required. If Linux agents are used, GuestAndHybridManagement tag is also required. |
Outbound | No | Yes |
| AzureOpenDatasets | Azure Open Datasets. Note: This tag has a dependency on the AzureFrontDoor.Frontend and Storage tag. |
Outbound | No | Yes |
| AzurePlatformDNS | The basic infrastructure (default) DNS service. You can use this tag to disable the default DNS. Be cautious when you use this tag. We recommend that you read Azure platform considerations. We also recommend that you perform testing before you use this tag. |
Outbound | No | No |
| AzurePlatformIMDS | Azure Instance Metadata Service (IMDS), which is a basic infrastructure service. You can use this tag to disable the default IMDS. Be cautious when you use this tag. We recommend that you read Azure platform considerations. We also recommend that you perform testing before you use this tag. |
Outbound | No | No |
| AzurePlatformLKM | Windows licensing or key management service. You can use this tag to disable the defaults for licensing. Be cautious when you use this tag. We recommend that you read Azure platform considerations. We also recommend that you perform testing before you use this tag. |
Outbound | No | No |
| AzureResourceManager | Azure Resource Manager. | Outbound | No | Yes |
| AzureSentinel | Microsoft Sentinel. | Inbound | No | Yes |
| AzureSignalR | Azure SignalR. | Outbound | No | Yes |
| AzureSiteRecovery | Azure Site Recovery. Note: This tag has a dependency on the AzureActiveDirectory, AzureKeyVault, EventHub,GuestAndHybridManagement and Storage tags. |
Outbound | No | Yes |
| AzureSphere | This tag or the IP addresses covered by this tag can be used to restrict access to Azure Sphere Security Services. | Both | No | Yes |
| AzureSpringCloud | Allow traffic to applications hosted in Azure Spring Apps. | Outbound | No | Yes |
| AzureStack | Azure Stack Bridge services. This tag represents the Azure Stack Bridge service endpoint per region. |
Outbound | No | Yes |
| AzureTrafficManager | Azure Traffic Manager probe IP addresses. For more information on Traffic Manager probe IP addresses, see Azure Traffic Manager FAQ. |
Inbound | No | Yes |
| AzureUpdateDelivery | The Azure Update Delivery service tag used for accessing Windows Updates is marked for deprecation and in the future it will be decommissioned. Customers are advised to not take a dependency on this service tag and for customers already using it they are advised to migrate to one of the following options: Configure Azure Firewall for your Windows 10/11 devices as documented: • Manage connection endpoints for Windows 11 Enterprise • Manage connection endpoints for Windows 10 Enterprise, version 21H2 Deploy the Windows Server Update Services (WSUS) Plan deployment for updating Windows VMs in Azure then proceed to Step 2: Configure WSUS |
Outbound | No | Yes |
| AzureWebPubSub | AzureWebPubSub | Both | Yes | Yes |
| BatchNodeManagement | Management traffic for deployments dedicated to Azure Batch. | Both | Yes | Yes |
| ChaosStudio | Azure Chaos Studio. Note: If you have enabled Application Insights integration on the Chaos Agent, the AzureMonitor tag is also required. |
Both | No | Yes |
| CognitiveServicesFrontend | The address ranges for traffic for Azure AI services frontend portals. | Both | No | Yes |
| CognitiveServicesManagement | The address ranges for traffic for Azure AI services. | Both | No | Yes |
| DataFactory | Azure Data Factory | Both | Yes | Yes |
| DataFactoryManagement | Management traffic for Azure Data Factory. | Outbound | No | Yes |
| Dynamics365ForMarketingEmail | The address ranges for the marketing email service of Dynamics 365. | Both | Yes | Yes |
| Dynamics365BusinessCentral | This tag or the IP addresses covered by this tag can be used to restrict access from/to the Dynamics 365 Business Central Services. | Both | No | Yes |
| EOPExternalPublishedIPs | This tag represents the IP addresses used for Security & Compliance Center PowerShell. Refer to the Connect to Security & Compliance Center PowerShell using the EXO V2 module for more details. | Both | No | Yes |
| EventHub | Azure Event Hubs. | Outbound | Yes | Yes |
| GatewayManager | Management traffic for deployments dedicated to Azure VPN Gateway and Application Gateway. | Inbound | No | No |
| GuestAndHybridManagement | Azure Automation and Guest Configuration. | Outbound | No | Yes |
| HDInsight | Azure HDInsight. | Inbound | Yes | Yes |
| Internet | The IP address space that's outside the virtual network and reachable by the public internet. The address range includes the Azure-owned public IP address space. |
Both | No | No |
| KustoAnalytics | Kusto Analytics. | Both | No | No |
| LogicApps | Logic Apps. | Both | No | Yes |
| LogicAppsManagement | Management traffic for Logic Apps. | Inbound | No | Yes |
| M365ManagementActivityApi | The Office 365 Management Activity API provides information about various user, admin, system, and policy actions and events from Office 365 and Microsoft Entra activity logs. Customers and partners can use this information to create new or enhance existing operations, security, and compliance-monitoring solutions for the enterprise. Note: This tag has a dependency on the AzureActiveDirectory tag. |
Outbound | Yes | Yes |
| M365ManagementActivityApiWebhook | Notifications are sent to the configured webhook for a subscription as new content becomes available. | Inbound | Yes | Yes |
| MicrosoftAzureFluidRelay | This tag represents the IP addresses used for Azure Microsoft Fluid Relay Server. Note: This tag has a dependency on the AzureFrontDoor.Frontend tag. |
Outbound | No | Yes |
| MicrosoftCloudAppSecurity | Microsoft Defender for Cloud Apps. | Outbound | No | Yes |
| MicrosoftDefenderForEndpoint | Microsoft Defender for Endpoint core services. Note: Devices need to be onboarded with streamlined connectivity and meet requirements in order to use this service tag. Defender for Endpoint/Server require additional service tags, like OneDSCollector, to support all functionality. For more information, see Onboarding devices using streamlined connectivity for Microsoft Defender for Endpoint |
Both | No | Yes |
| PowerBI | Power BI platform backend services and API endpoints. |
Both | No | Yes |
| PowerPlatformInfra | This tag represents the IP addresses used by the infrastructure to host Power Platform services. | Both | Yes | Yes |
| PowerPlatformPlex | This tag represents the IP addresses used by the infrastructure to host Power Platform extension execution on behalf of the customer. | Both | Yes | Yes |
| PowerQueryOnline | Power Query Online. | Both | No | Yes |
| Scuba | Data connectors for Microsoft security products (Sentinel, Defender, etc.). | Inbound | No | No |
| SerialConsole | Limit access to boot diagnostics storage accounts from only Serial Console service tag | Inbound | No | Yes |
| ServiceBus | Azure Service Bus traffic that uses the Premium service tier. | Outbound | Yes | Yes |
| ServiceFabric | Azure Service Fabric. Note: This tag represents the Service Fabric service endpoint for control plane per region. This enables customers to perform management operations for their Service Fabric clusters from their VNET endpoint. (For example, https:// westus.servicefabric.azure.com). |
Both | No | Yes |
| Sql | Azure SQL Database, Azure Database for MySQL Single Server, Azure Database for PostgreSQL Single Server, Azure Database for MariaDB, and Azure Synapse Analytics. Note: This tag represents the service, but not specific instances of the service. For example, the tag represents the Azure SQL Database service, but not a specific SQL database or server. This tag doesn't apply to SQL managed instance. |
Outbound | Yes | Yes |
| SqlManagement | Management traffic for SQL-dedicated deployments. | Both | No | Yes |
| Storage | Azure Storage. Note: This tag represents the service, but not specific instances of the service. For example, the tag represents the Azure Storage service, but not a specific Azure Storage account. |
Outbound | Yes | Yes |
| StorageSyncService | Storage Sync Service. | Both | No | Yes |
| StorageMover | Storage Mover. | Outbound | Yes | Yes |
| WindowsAdminCenter | Allow the Windows Admin Center backend service to communicate with customers' installation of Windows Admin Center. | Outbound | No | Yes |
| WindowsVirtualDesktop | Azure Virtual Desktop (formerly Windows Virtual Desktop). | Both | No | Yes |
| VideoIndexer | Video Indexer. Used to allow customers opening up their NSG to Video Indexer service and receive callbacks to their service. |
Both | No | Yes |
| VirtualNetwork | The virtual network address space (all IP address ranges defined for the virtual network), all connected on-premises address spaces, peered virtual networks, virtual networks connected to a virtual network gateway, the virtual IP address of the host, and address prefixes used on user-defined routes. This tag might also contain default routes. | Both | No | No |
Note
When using service tags with Azure Firewall, you can only create destination rules on inbound and outbound traffic. Source rules are not supported. For more information, see the Azure Firewall Service Tags doc.
Service tags of Azure services denote the address prefixes from the specific cloud being used. For example, the underlying IP ranges that correspond to the Sql tag value on the Azure Public cloud will be different from the underlying ranges on the Microsoft Azure operated by 21Vianet cloud.
If you implement a virtual network service endpoint for a service, such as Azure Storage or Azure SQL Database, Azure adds a route to a virtual network subnet for the service. The address prefixes in the route are the same address prefixes, or CIDR ranges, as those of the corresponding service tag.
Tags supported in the classic deployment model
The classic deployment model (before Azure Resource Manager) supports a small subset of the tags listed in the previous table. The tags in the classic deployment model are spelled differently, as shown in the following table:
| Resource Manager tag | Corresponding tag in classic deployment model |
|---|---|
| AzureLoadBalancer | AZURE_LOADBALANCER |
| Internet | INTERNET |
| VirtualNetwork | VIRTUAL_NETWORK |
Tags unsupported for user defined routes (UDR)
The following is a list of tags currently unsupported for use with user defined routes (UDR).
AzurePlatformDNS
AzurePlatformIMDS
AzurePlatformLKM
VirtualNetwork
AzureLoadBalancer
Internet
Service tags on-premises
You can obtain the current service tag and range information to include as part of your on-premises firewall configurations. This information is the current point-in-time list of the IP ranges that correspond to each service tag. You can obtain the information programmatically or via a JSON file download, as described in the following sections.
Use the Service Tag Discovery API
You can programmatically retrieve the current list of service tags together with IP address range details:
For example, to retrieve all the prefixes for the Storage Service Tag, you can use the following PowerShell cmdlets:
$serviceTags = Get-AzNetworkServiceTag -Location eastus2
$storage = $serviceTags.Values | Where-Object { $_.Name -eq "Storage" }
$storage.Properties.AddressPrefixes
Note
- The API data represents those tags that can be used with NSG rules in your region. Use the API data as the source of truth for available Service Tags as it may be different than the JSON downloadable file.
- It takes up to 4 weeks for new Service Tag data to propagate in the API results across all Azure regions. Because of this process, your API data results may be out of sync with the downloadable JSON file as the API data represents a subset of the tags currently in the downloadable JSON file.
- You must be authenticated and have a role with read permissions for your current subscription.
Discover service tags by using downloadable JSON files
You can download JSON files that contain the current list of service tags together with IP address range details. These lists are updated and published weekly. Locations for each cloud are:
The IP address ranges in these files are in CIDR notation.
The following AzureCloud tags don't have regional names formatted according to the normal schema:
AzureCloud.centralfrance (FranceCentral)
AzureCloud.southfrance (FranceSouth)
AzureCloud.germanywc (GermanyWestCentral)
AzureCloud.germanyn (GermanyNorth)
AzureCloud.norwaye (NorwayEast)
AzureCloud.norwayw (NorwayWest)
AzureCloud.switzerlandn (SwitzerlandNorth)
AzureCloud.switzerlandw (SwitzerlandWest)
AzureCloud.usstagee (EastUSSTG)
AzureCloud.usstagec (SouthCentralUSSTG)
AzureCloud.brazilse (BrazilSoutheast)
Tip
You can detect updates from one publication to the next by noting increased changeNumber values in the JSON file. Each subsection (for example, Storage.WestUS) has its own changeNumber that's incremented as changes occur. The top level of the file's changeNumber is incremented when any of the subsections is changed.
For examples of how to parse the service tag information (for example, get all address ranges for Storage in WestUS), see the Service Tag Discovery API PowerShell documentation.
When new IP addresses are added to service tags, they won't be used in Azure for at least one week. This gives you time to update any systems that might need to track the IP addresses associated with service tags.
Next steps
- Learn how to create a network security group.