Edit

Share via


Set-IpamRange

Modifies an existing IP address range.

Syntax

Set-IpamRange
   [-StartIPAddress] <IPAddress[]>
   [-EndIPAddress] <IPAddress[]>
   [-ManagedByService <String[]>]
   [-ServiceInstance <String[]>]
   [-NetworkType <VirtualizationType[]>]
   [-AddressSpace <String[]>]
   [-CreateSubnetIfNotFound]
   [-NewNetworkId <String>]
   [-NewStartIPAddress <IPAddress>]
   [-NewEndIPAddress <IPAddress>]
   [-NewManagedByService <String>]
   [-NewServiceInstance <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-AssignmentType <AddressAssignment>]
   [-AssignmentDate <DateTime>]
   [-UtilizationCalculation <UtilizationCalculation>]
   [-UtilizedAddresses <Double>]
   [-Description <String>]
   [-Owner <String>]
   [-ReservedAddress <String[]>]
   [-DnsServer <IPAddress[]>]
   [-DnsSuffix <String[]>]
   [-ConnectionSpecificDnsSuffix <String>]
   [-WinsServer <IPAddress[]>]
   [-VIP <String[]>]
   [-Gateway <String[]>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-AssociatedReverseLookupZone <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-IpamRange
   -InputObject <CimInstance[]>
   [-CreateSubnetIfNotFound]
   [-NewNetworkId <String>]
   [-NewStartIPAddress <IPAddress>]
   [-NewEndIPAddress <IPAddress>]
   [-NewManagedByService <String>]
   [-NewServiceInstance <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-AssignmentType <AddressAssignment>]
   [-AssignmentDate <DateTime>]
   [-UtilizationCalculation <UtilizationCalculation>]
   [-UtilizedAddresses <Double>]
   [-Description <String>]
   [-Owner <String>]
   [-ReservedAddress <String[]>]
   [-DnsServer <IPAddress[]>]
   [-DnsSuffix <String[]>]
   [-ConnectionSpecificDnsSuffix <String>]
   [-WinsServer <IPAddress[]>]
   [-VIP <String[]>]
   [-Gateway <String[]>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-AssociatedReverseLookupZone <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-IpamRange cmdlet modifies an existing IP address range that an IP Address Management (IPAM) server manages.

Examples

Example 1: Modify an existing IP address range

PS C:\> Get-IpamRange -StartIPAddress 10.12.1.1 -EndIPAddress 10.12.1.254|Set-IpamRange -NewManagedByService VMM -NewServiceInstance "vmm1.contoso.com" -PassThru

Overlapping      : False

NetworkID        : 10.12.0.0/16

StartAddress     : 10.12.1.1

EndAddress       : 10.12.1.254

ManagedByService : VMM

ServiceInstance  : vmm1.contoso.com

NetworkType      : NonVirtualized

Owner            :

This command modifies an existing IP address range that is currently managed by IPAM, to be managed by Virtual Machine Manager (VMM).

The command includes the PassThru parameter, so it displays results to the console.

Example 2: Add custom metadata to an IP address range

PS C:\> Get-IpamRange -StartIPAddress 10.12.1.1 -EndIPAddress 10.12.1.254|Set-IpamRange -AddCustomConfiguration "ADSite=ContosoCorporate" -PassThru| Format-List Overlapping, StartAddress, EndAddress, ManagedByService, ServiceInstance, CustomConfiguration

Overlapping         : False

StartAddress        : 10.12.1.1

EndAddress          : 10.12.1.254

ManagedByService    : VMM

ServiceInstance     : vmm1.contoso.com

CustomConfiguration : ADSite= ContosoCorporate;

This command adds custom metadata to an IP range by using a custom field to identify the location.

The command includes the PassThru parameter, so it displays results to the console.

Example 3: Modify the network type for an IP address range

PS C:\> Set-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254 -ManagedByService IPAM -ServiceInstance localhost -AddressSpace "Default" -NetworkType NonVirtualized -NewNetworkType Provider -PassThru

Overlapping      : False

NetworkID        : 10.12.0.0/16

StartAddress     : 10.12.3.1

EndAddress       : 10.12.3.254

ManagedByService : IPAM

ServiceInstance  : Localhost

NetworkType      : Provider

Owner            :

This command modifies the network type of an IP address range from non-virtualized to provider. By default, the provider address range will be assigned to the default provider address space.

The command includes the PassThru parameter, so it displays results to the console.

Example 4: Modify the network type for an IP address range to its previous state

PS C:\> Set-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254 -ManagedByService IPAM -ServiceInstance localhost -AddressSpace Default -NetworkType Provider -NewNetworkType NonVirtualized -PassThru

Overlapping      : False

NetworkID        : 10.12.0.0/16

StartAddress     : 10.12.3.1

EndAddress       : 10.12.3.254

ManagedByService : IPAM

ServiceInstance  : Localhost

NetworkType      : NonVirtualized

Owner            :

This command modifies the network type of an IP address range from provider to non-virtualized. The non-virtualized address range will be added to the default address space. You cannot specify the provider address space in this case.

The command includes the PassThru parameter, so it displays results to the console.

Example 5: Modify the network type for an IP address range and assign the IP addresses

PS C:\> Set-IpamRange -StartIPAddress 10.12.3.1 -EndIPAddress 10.12.3.254 -ManagedByService IPAM -ServiceInstance localhost -AddressSpace Default -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace ContosoDataCenter -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
Overlapping       : False

NetworkID         : 10.12.0.0/16

StartAddress      : 10.12.3.1

EndAddress        : 10.12.3.254

ManagedByService  : IPAM

ServiceInstance   : Localhost

NetworkType       : Provider

ProviderAddressSpace : ContosoDataCenter

CustomerAddressSpace :

This command modifies the network type of an IP address from non-virtualized to provider. The command assigns the IP address to the provider address space ContosoDataCenter.

The command includes the PassThru parameter, so it displays results to the console.

Parameters

-AddCustomConfiguration

Specifies semi-colon (;) separated name/value pairs. This parameter specifies custom metadata that are associated with the address space.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AddressSpace

Specifies an array of names of address spaces. If you do not specify a value, the cmdlet modifies matching ranges from all address spaces.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

For more information about Windows PowerShell background jobs, see about_Jobs.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AssignmentDate

Specifies the date on which to assign addresses in this range.

Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AssignmentType

Specifies the address assignment type from this range.

The acceptable values for this parameter are:

  • Static
  • Dynamic
  • Auto
  • VIP
  • Reserved
Type:AddressAssignment
Accepted values:Static, Dynamic, Auto, VIP, Reserved
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-AssociatedReverseLookupZone

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ConnectionSpecificDnsSuffix

Specifies the connection-specific DNS suffix to associate with this range.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-CreateSubnetIfNotFound

Indicates that the cmdlet creates a parent subnet for this range of addresses. If you specify this parameter, the cmdlet automatically creates a parent subnet for this range, if no parent subnet exists.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

Specifies a description for the range to modify.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-DnsServer

Specifies an array of Domain Name System (DNS) servers to associate with this range. Specify the names of the DNS servers in the order of preference, highest to lowest.

Type:IPAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-DnsSuffix

Specifies an array of suffixes.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EndIPAddress

Specifies an array of IP addresses. For this parameter, the addresses represent the high end of the range to modify.

Type:IPAddress[]
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Gateway

Specifies an array of gateway servers, imported from a Dynamic Host Configuration Protocol (DHCP) scope, to associate with a range in IPAM. Specify the names of the gateway servers in the order of preference, highest to lowest. The format for specification is <ipaddress>\<metric>. To specify Automatic metric, the format is <Ipaddress>\Automatic.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Type:CimInstance[]
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ManagedByService

Specifies an array of services that manage the range to modify.

Type:String[]
Aliases:MB
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NetworkType

Specifies an array of network types for the addresses to modify.

The acceptable values for this parameter are:

  • Provider
  • Customer
  • NonVirtualized

If you do not specify a value, the cmdlet modifies all matching IP address ranges of network type Provider, Customer, and NonVirtualized.

Type:VirtualizationType[]
Accepted values:NonVirtualized, Provider, Customer
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewAddressSpace

Specifies the name of a new address space for the IP address range. A range with network type NonVirtualized can only belong to Default address space. A range with network type Provider can belong to either the Default address space or a Provider address space. A range with network type Customer can only belong to a Customer address space.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewEndIPAddress

Specifies a new IP address. For this parameter, the address represents the new high end of the range. An error occurs if the value is not compatible with the network ID and the starting IP address.

Type:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewManagedByService

Specifies the name of a new value of the ManagedByService property.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewNetworkId

Specifies the name of a new value of the NetworkId property. Choose a value compatible with the existing beginning and ending IP addresses for the range, or specify new values for starting and ending IP addresses.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewNetworkType

Specifies the name of a new value of network type for this address. You can change the network type from NonVirtualized to Provider, or from Provider to NonVirtualized. However, you cannot convert network type from NonVirtualized or Provider to Customer.

Type:VirtualizationType
Accepted values:NonVirtualized, Provider
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewServiceInstance

Specifies the name of a new value of the service instance property. Choose a new value compatible with the value of ManagedByService parameter.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NewStartIPAddress

Specifies a new IP address. For this parameter, the address represents the new low end of the range. An error occurs if the value is not compatible with the network ID and the ending IP address.

Type:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Owner

Specifies the name of an owner for an address range.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveCustomConfiguration

Specifies a list of custom metadata fields to remove from the range object. The list is a string of name-value pairs, separated by semicolons (;).

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ReservedAddress

Specifies an array of reserved addresses from the given range. This list will overwrite the existing list of reserved addresses for the given range.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ServiceInstance

Specifies an array of service instances that manage the address ranges to modify.

Type:String[]
Aliases:SI
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-StartIPAddress

Specifies an array of IP addresses. For this parameter, the addresses represent the low end of the range to modify.

Type:IPAddress[]
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UtilizationCalculation

Specifies whether the utilization information will be automatically calculated by IPAM or specified by the user. The utilization calculation provides a visual alert when the utilization level of IP addresses is greater than a threshold value.

Type:UtilizationCalculation
Accepted values:Auto, UserSpecified
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-UtilizedAddresses

Specifies the number of addresses to utilize from the pool of IP addresses. Use this parameter when the utilization calculation is set to the value in UserSpecified.

Type:Double
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-VIP

Specifies an array of virtual IP addresses, usually set aside for load balancers, from the range. Specify the Virtual IPs (VIP) as a list, in descending order of precedence. This list overwrites any existing VIPs specified for the given range.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WinsServer

Specifies an array of Windows Internet Name Service (WINS) servers to associate with this range. Specify the WINS servers in decreasing order of precedence. This list overwrites any existing list of WINS servers.

Type:IPAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

Outputs

CimInstance

This cmdlet returns an object that contains the modified IP address range.