Share via

Wlan L3 Test 01 - Scan for Networks (strict) 5 Times

  • Article

This automated test performs a scan five times with flush and requires the driver to complete the scan in less than four seconds. Scan results must contain at least one network each time.

Test details

Associated requirements

Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~10 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test runs the following test five times: “Wlan L2 Test 01 - Scan for Networks (strict)”. Any error encountered in any of the five attempts will fail the test

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

WLAN L3 Tests

 

 

Send comments about this topic to Microsoft