Manage SDN resources in the VMM fabric

This article summarizes the software-defined network (SDN) operations that you can manage in the System Center Virtual Machine Manager (VMM) fabric. For operations that can't be managed in the fabric, you need to use REST APIs or Windows Server PowerShell.

A software-defined network (SDN) abstracts physical hardware network infrastructure into virtual networks. In the VMM fabric, you can deploy and manage an SDN infrastructure, including network controller, software load balancers, and gateways, to provision and manage virtual networks at scale. Learn more.

What can I manage in VMM?

SDN resources fall into two broad categories in VMM:

• Known resources: Resources that can be created and managed with VMM.
• Unknown resources: Resources that must be created and managed outside of VMM.

Known resources

These resources can be created and managed with or without VMM. If you make changes to these resources outside VMM, VMM overwrites the out-of-box changes, when a VMM operation is performed on the object. This could cause configuration and connectivity issues and should be avoided whenever possible. There's no way to revert an overwrite unless you detect the issue and reconfigure manually.

We strongly recommend that you configure resources that are known to VMM in the VMM fabric only.

Known object	Details	Modify
AccessControlList	An AccessControlList contains a list of ACL rules and can be assigned to virtual subnets or IP configurations.	Overwritten by VMM if you enable out-of-box
AclRule	Summarizes the network traffic that is allowed or denied for a VM network interface.	Overwritten by VMM if you enable out-of-box
Gateway	Provides gateway services to one or more virtualNetworks.	Overwritten by VMM if you enable out-of-box
GatewayPool	GatewayPools aggregate a set of gateways resources into a single pool.	Overwritten by VMM if you enable out-of-box
Host		Overwritten by VMM if you enable out-of-box
HostProperties		Overwritten by VMM if you enable out-of-box
IpConfigurations	IP addresses of the load balancer.	Overwritten by VMM if you enable out-of-box
IpPool	Create an IP address pool on the network controller.	Overwritten by VMM if you enable out-of-box
LoadBalancerManager	Configures the load balancing service of the Network Controller.	Overwritten by VMM if you enable out-of-box
LoadBalancerMux	Represents a MUX VM deployed in the network controller fabric.	Overwritten by VMM if you enable out-of-box
LogicalSubnets	A subnet/VLAN pair.	Overwritten by VMM if you enable out-of-box
MACPool	Creates a MAC address pool on the network controller.	Overwritten by VMM if you enable out-of-box
NatRules	Configures the load balancer to apply NAT to traffic.	Overwritten by VMM if you enable out-of-box
NetworkInterface	Specifies the configuration of either a host virtual interface (host vNIC) or a virtual server NIC (VMNIC).	Overwritten by VMM if you enable out-of-box
PortSettings		Overwritten by VMM if you enable out-of-box
PublicIPAddress	Specifies an IP address, which is publicly available. It's used by virtualGateways and loadBalancers to indicate the IP address that can be used to communicate with the virtual network from outside.	Overwritten by VMM if you enable out-of-box
QualityOfService		Overwritten by VMM if you enable out-of-box
Servers	Represents a physical server that is being controlled by the Network Controller.	Overwritten by VMM if you enable out-of-box
VirtualGateway	Describes the gateway used for cross-premises connectivity from the virtual network.	Overwritten by VMM if you enable out-of-box
VirtualGatewayBgpPeer	Configures BGP peers of the virtualGateways resource.	Overwritten by VMM if you enable out-of-box
VirtualNetwork	Used to create a virtual network using HNV for tenant overlays.	Overwritten by VMM if you enable out-of-box
VirtualServer	Corresponds to a virtual machine. Must be created for VMs that correspond to gateway and MUX resources.	Overwritten by VMM if you enable out-of-box
VirtualSubnet	Used to create virtual subnets (VSIDs) under a tenant's virtual network (RDID).	Overwritten by VMM if you enable out-of-box
VirtualSwitchManager	Configures the virtual switch properties on every server managed by the Network Controller.	Overwritten by VMM if you enable out-of-box
VM	Corresponds to a virtual machine.	Overwritten by VMM if you enable out-of-box

Unknown resources

These resources are to be created and managed outside the VMM fabric. VMM has no knowledge of them, and obviously doesn't overwrite them when they're configured outside the VMM console.

Unknown objects are any Network Controller resources that aren't listed in the table above. Get the latest list of SDN resources.