Training
Module
Configure IP network connectivity - Training
This module explores configuring Windows clients to communicate over IPv4 and IPv6 networks.
This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
This header is used by multiple technologies. For more information, see:
iphlpapi.h contains the following programming interfaces:
AddIPAddress The AddIPAddress function adds the specified IPv4 address to the specified adapter. |
AllocateAndGetTcpExTableFromStack Retrieves the TCP connection table and allocates memory from the local heap to store the table. |
AllocateAndGetUdpExTableFromStack Retrieves the UDP connection table and allocates memory from the local heap to store the table. |
CancelIfTimestampConfigChange This function is reserved for system use, and you should not call it from your code. (CancelIfTimestampConfigChange) |
CancelIPChangeNotify Cancels notification of IPv4 address and route changes previously requested with successful calls to the NotifyAddrChange or NotifyRouteChange functions. |
CaptureInterfaceHardwareCrossTimestamp Retrieves cross timestamp info for a network adapter. |
CreateIpForwardEntry The CreateIpForwardEntry function creates a route in the local computer's IPv4 routing table. |
CreateIpNetEntry The CreateIpNetEntry function creates an Address Resolution Protocol (ARP) entry in the ARP table on the local computer. |
CreatePersistentTcpPortReservation Creates a persistent TCP port reservation for a consecutive block of TCP ports on the local computer. |
CreatePersistentUdpPortReservation Creates a persistent UDP port reservation for a consecutive block of UDP ports on the local computer. |
CreateProxyArpEntry The CreateProxyArpEnry function creates a Proxy Address Resolution Protocol (PARP) entry on the local computer for the specified IPv4 address. |
DeleteIPAddress The DeleteIPAddress function deletes an IP address previously added using AddIPAddress. |
DeleteIpForwardEntry Deletes an existing route in the local computer's IPv4 routing table. |
DeleteIpNetEntry The DeleteIpNetEntry function deletes an ARP entry from the ARP table on the local computer. |
DeletePersistentTcpPortReservation Deletes a persistent TCP port reservation for a consecutive block of TCP ports on the local computer. (DeletePersistentTcpPortReservation) |
DeletePersistentUdpPortReservation Deletes a persistent TCP port reservation for a consecutive block of TCP ports on the local computer. (DeletePersistentUdpPortReservation) |
DeleteProxyArpEntry The DeleteProxyArpEntry function deletes the PARP entry on the local computer specified by the dwAddress and dwIfIndex parameters. |
DisableMediaSense The DisableMediaSense function disables the media sensing capability of the TCP/IP stack on a local computer. |
EnableRouter The EnableRouter function turns on IPv4 forwarding on the local computer. EnableRouter also increments a reference count that tracks the number of requests to enable IPv4 forwarding. |
FlushIpNetTable The FlushIpNetTable function deletes all ARP entries for the specified interface from the ARP table on the local computer. |
GetAdapterIndex The GetAdapterIndex function obtains the index of an adapter, given its name. |
GetAdapterOrderMap The GetAdapterOrderMap function obtains an adapter order map that indicates priority for interfaces on the local computer. |
GetAdaptersAddresses Retrieves the addresses associated with the adapters on the local computer. |
GetAdaptersInfo The GetAdaptersInfo function retrieves adapter information for the local computer. |
GetBestInterface The GetBestInterface function retrieves the index of the interface that has the best route to the specified IPv4 address. |
GetBestInterfaceEx The GetBestInterfaceEx function retrieves the index of the interface that has the best route to the specified IPv4 or IPv6 address. |
GetBestRoute The GetBestRoute function retrieves the best route to the specified destination IP address. |
GetExtendedTcpTable Retrieves a table that contains a list of TCP endpoints available to the application. |
GetExtendedUdpTable Retrieves a table that contains a list of UDP endpoints available to the application. |
GetFriendlyIfIndex Takes an interface index and returns a backward-compatible interface index, that is, an index that uses only the lower 24 bits. |
GetIcmpStatistics The GetIcmpStatistics function retrieves the Internet Control Message Protocol (ICMP) for IPv4 statistics for the local computer. |
GetIcmpStatisticsEx The GetIcmpStatisticsEx function retrieves Internet Control Message Protocol (ICMP) statistics for the local computer. The GetIcmpStatisticsEx function is capable of retrieving IPv6 ICMP statistics. |
GetIfEntry The GetIfEntry function retrieves information for the specified interface on the local computer. |
GetIfTable The GetIfTable function retrieves the MIB-II interface table. |
GetInterfaceActiveTimestampCapabilities Retrieves the currently enabled timestamp capabilities of a network adapter. |
GetInterfaceCurrentTimestampCapabilities This function is reserved for system use, and you should not call it from your code. (GetInterfaceCurrentTimestampCapabilities) |
GetInterfaceHardwareTimestampCapabilities This function is reserved for system use, and you should not call it from your code. (GetInterfaceHardwareTimestampCapabilities) |
GetInterfaceInfo The GetInterfaceInfo function obtains the list of the network interface adapters with IPv4 enabled on the local system. |
GetInterfaceSupportedTimestampCapabilities Retrieves the supported timestamp capabilities of a network adapter. |
GetIpAddrTable The GetIpAddrTable function retrieves the interface�to�IPv4 address mapping table. |
GetIpErrorString The GetIpErrorString function retrieves an IP Helper error string. |
GetIpForwardTable The GetIpForwardTable function retrieves the IPv4 routing table. |
GetIpNetTable The GetIpNetTable function retrieves the IPv4 to physical address mapping table. |
GetIpStatistics The GetIpStatistics function retrieves the IP statistics for the current computer. |
GetIpStatisticsEx The GetIpStatisticsEx function retrieves the Internet Protocol (IP) statistics for the current computer. |
GetNetworkParams The GetNetworkParams function retrieves network parameters for the local computer. |
GetNumberOfInterfaces The GetNumberOfInterfaces functions retrieves the number of interfaces on the local computer. |
GetOwnerModuleFromTcp6Entry Retrieves data about the module that issued the context bind for a specific IPv6 TCP endpoint in a MIB table row. |
GetOwnerModuleFromTcpEntry Retrieves data about the module that issued the context bind for a specific IPv4 TCP endpoint in a MIB table row. |
GetOwnerModuleFromUdp6Entry Retrieves data about the module that issued the context bind for a specific IPv6 UDP endpoint in a MIB table row. |
GetOwnerModuleFromUdpEntry Retrieves data about the module that issued the context bind for a specific IPv4 UDP endpoint in a MIB table row. |
GetPerAdapterInfo The GetPerAdapterInfo function retrieves information about the adapter corresponding to the specified interface. |
GetPerTcp6ConnectionEStats Retrieves extended statistics for an IPv6 TCP connection. |
GetPerTcpConnectionEStats Retrieves extended statistics for an IPv4 TCP connection. |
GetRTTAndHopCount The GetRTTAndHopCount function determines the round-trip time (RTT) and hop count to the specified destination. |
GetTcp6Table Retrieves the TCP connection table for IPv6. (GetTcp6Table) |
GetTcp6Table2 Retrieves the TCP connection table for IPv6. (GetTcp6Table2) |
GetTcpStatistics The GetTcpStatistics function retrieves the TCP statistics for the local computer. |
GetTcpStatisticsEx The GetTcpStatisticsEx function retrieves the Transmission Control Protocol (TCP) statistics for the current computer. |
GetTcpStatisticsEx2 The GetTcpStatisticsEx2 function retrieves the Transmission Control Protocol (TCP) statistics for the current computer. |
GetTcpTable Retrieves the IPv4 TCP connection table. (GetTcpTable) |
GetTcpTable2 Retrieves the IPv4 TCP connection table. (GetTcpTable2) |
GetUdp6Table Retrieves the IPv6 User Datagram Protocol (UDP) listener table. |
GetUdpStatistics The GetUdpStatistics function retrieves the User Datagram Protocol (UDP) statistics for the local computer. |
GetUdpStatisticsEx The GetUdpStatisticsEx function retrieves the User Datagram Protocol (UDP) statistics for the current computer. |
GetUdpStatisticsEx2 The GetUdpStatisticsEx2 function retrieves the User Datagram Protocol (UDP) statistics for the current computer. |
GetUdpTable Retrieves the IPv4 User Datagram Protocol (UDP) listener table. |
GetUniDirectionalAdapterInfo The GetUniDirectionalAdapterInfo function retrieves information about the unidirectional adapters installed on the local computer. A unidirectional adapter is an adapter that can receive datagrams, but not transmit them. |
IpReleaseAddress The IpReleaseAddress function releases an IPv4 address previously obtained through the Dynamic Host Configuration Protocol (DHCP). |
IpRenewAddress The IpRenewAddressfunction renews a lease on an IPv4 address previously obtained through Dynamic Host Configuration Protocol (DHCP). |
LookupPersistentTcpPortReservation Looks up the token for a persistent TCP port reservation for a consecutive block of TCP ports on the local computer. |
LookupPersistentUdpPortReservation Looks up the token for a persistent UDP port reservation for a consecutive block of TCP ports on the local computer. |
NhpAllocateAndGetInterfaceInfoFromStack The NhpAllocateAndGetInterfaceInfoFromStack function obtains adapter information about the local computer. |
NotifyAddrChange The NotifyAddrChange function causes a notification to be sent to the caller whenever a change occurs in the table that maps IPv4 addresses to interfaces. |
NotifyIfTimestampConfigChange This function is reserved for system use, and you should not call it from your code. (NotifyIfTimestampConfigChange) |
NotifyRouteChange The NotifyRouteChange function causes a notification to be sent to the caller whenever a change occurs in the IPv4 routing table. |
ParseNetworkString Parses the input network string and checks whether it is a legal representation of the specified IP network string type. If the string matches a type and its specification, the function can optionally return the parsed result. |
RegisterInterfaceTimestampConfigChange Registers a user-implemented callback function, which the system calls to notify you of a timestamp capability change. |
ResolveNeighbor Resolves the physical address for a neighbor IP address entry on the local computer. (ResolveNeighbor) |
RestoreMediaSense The RestoreMediaSense function restores the media sensing capability of the TCP/IP stack on a local computer on which the DisableMediaSense function was previously called. |
SendARP The SendARP function sends an Address Resolution Protocol (ARP) request to obtain the physical address that corresponds to the specified destination IPv4 address. |
SetIfEntry The SetIfEntry function sets the administrative status of an interface. |
SetIpForwardEntry The SetIpForwardEntry function modifies an existing route in the local computer's IPv4 routing table. |
SetIpNetEntry The SetIpNetEntry function modifies an existing ARP entry in the ARP table on the local computer. |
SetIpStatistics The SetIpStatistics function toggles IP forwarding on or off and sets the default time-to-live (TTL) value for the local computer. |
SetIpStatisticsEx Toggles IP forwarding on or off and sets the default time-to-live (TTL) value for the local computer. |
SetIpTTL The SetIpTTL function sets the default time-to-live (TTL) value for the local computer. |
SetPerTcp6ConnectionEStats Sets a value in the read/write information for an IPv6 TCP connection. This function is used to enable or disable extended statistics for an IPv6 TCP connection. |
SetPerTcpConnectionEStats Sets a value in the read/write information for an IPv4 TCP connection. This function is used to enable or disable extended statistics for an IPv4 TCP connection. |
SetTcpEntry The SetTcpEntry function sets the state of a TCP connection. |
UnenableRouter The UnenableRouter function decrements the reference count that tracks the number of requests to enable IPv4 forwarding. When this reference count reaches zero, UnenableRouter turns off IPv4 forwarding on the local computer. |
UnregisterInterfaceTimestampConfigChange Cancels notifications about timestamp capability changes by unregistering the callback function you registered in a call to RegisterInterfaceTimestampConfigChange. |
INTERFACE_TIMESTAMP_CONFIG_CHANGE_CALLBACK A callback function that you implement in your app in order to be notified of changes to the timestamp capabilities of a network adapter. |
INTERFACE_HARDWARE_CROSSTIMESTAMP Describes a cross timestamp retrieved from a network adapter. |
INTERFACE_HARDWARE_TIMESTAMP_CAPABILITIES Describes the timestamping capabilities of a network interface card's (NIC's) hardware. |
INTERFACE_SOFTWARE_TIMESTAMP_CAPABILITIES Describes the software timestamping capabilities of a NIC's miniport driver. |
INTERFACE_TIMESTAMP_CAPABILITIES Describes the exact timestamp capabilities that a network adapter supports. |
INTERFACE_TIMESTAMP_CAPABILITY_FLAGS This structure is reserved for system use, and you should not use it in your code. |
NET_ADDRESS_INFO Contains IP address information returned by the ParseNetworkString function. |
NET_ADDRESS_FORMAT The NET_ADDRESS_FORMAT enumeration specifies the format of a network address returned by the ParseNetworkString function. |
Training
Module
Configure IP network connectivity - Training
This module explores configuring Windows clients to communicate over IPv4 and IPv6 networks.